Professional Documents
Culture Documents
Single RAN, Rel. SRAN 19, Operating Documentation, Issue 01 (HTML) > Features > LTE Features > Documentation of LTE Features >
FDD-LTE 18 and TD-LTE 18 Features Descriptions and Instructions > LTE 18 Radio Resource Management and Telecom Features >
LTE3106: IRAT idle mode mobility for 1.4Mhz and 3Mhz bandwidth cell
LTE3106 requirements
Equipment preconditions
Table: LTE3106 hardware and software requirements
FDD TDD
1 of 3 10/22/2021, 3:22 PM
LTE3106 requirements http://localhost:9090/informationbrowser/topic/m232938094_html/htm/d...
Sales information
Table: LTE3106 sales information
Background information
Get familiar with the following terms:
Idle mode The idle mode is used for saving power during inactivity of a user
equipment (UE). In this mode, the UE is switched on, but there is no
RRC connection established.
LTE762: Idle mode mobility from LTE to WCDMA, GSM or other LTE bands
This feature enables cell re-selection from LTE to WCDMA, GSM and other LTE networks.
2 of 3 10/22/2021, 3:22 PM
LTE3106 requirements http://localhost:9090/informationbrowser/topic/m232938094_html/htm/d...
When this feature is enabled, information about CDMA2000 frequencies and neighboring cells
relevant for cell re-selection from LTE to CDMA/1xRTT network can be broadcasted to the UE
in the idle and in the active mode.
When this feature is enabled, information about CDMA2000 frequencies and neighboring cells
relevant for cell re-selection from LTE to a CDMA/eHRPD network can be broadcasted to the
UE in the idle and in the active mode.
3 of 3 10/22/2021, 3:22 PM