Professional Documents
Culture Documents
2 x 100 mm
Kraftform Plus – Series 100 VDE
Wera VDE screwdrivers with multi-component Kraftform Plus handle for fast and low-fatigue working: hard gripping zones for high
working speeds whereas soft zones ensure high torque transfer. Combination profile - slotted and Phillips particularly for jobs on
terminal blocks, fuse boxes, switches and relays. Individually tested in water bath at 10,000 volts for secure work at the permissible
voltage of 1,000 volts. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace.
Web link
https://products.wera.de/en/tools_for_electricians_kraftform_plus__series_100_vde_162_i_ph_s_sb.html
Wera - 162 i PH/S SB Wera Werkzeuge GmbH
05100020001 - 4013288186577 Korzerter Straße 21-25
D-42349 Wuppertal
Tel: +49 (0)2 02 / 40 45-0
14.02.2021 - 1 / 2 E-Mail: info@wera.de
162 i PH/S SB VDE Insulated screwdriver for PlusMinus screws (Phillips/slotted), #
2 x 100 mm
Kraftform Plus – Series 100 VDE
Set contents:
The individual testing at 10,000 For the use in terminal blocks, The individual testing at 10,000 Impact strength tested at −40°C,
volts, in accordance with IEC control cabinets, switches, relays, volts, in accordance with IEC guaranteeing safety even under
60900, ensures safe working with sockets etc. 60900, ensures safe working with extreme conditions.
loads up to 1,000 volts. loads up to 1,000 volts.
Multicomponent Kraftform Prevents hand injuries Rapid hand repositioning Identification marking
handle
Wera produces the Kraftform The outstanding design of the The hard materials used for the All Kraftform Plus screwdrivers are
handle out of several materials Kraftform handle that fits perfectly handle ensure rapid hand marked with their drive profile and
with different properties. A into the hand prevents hand repositioning without any danger of size. This enables faster and more
resistant plastic is used for the injuries such as blisters and the skin "sticking" to the handle. reliable selection of the correct tool
core which ensures that the blade calluses. The surrounding hard zones with from the tool case.
is held securely even under high large diameters glide like wheels
strain. A softer material is used for across the hand.
the coloured soft zones, which
provides high frictional resistance
and allows the transfer of high
forces – resulting in less required
screwdriving effort. The red
sections with their hard surfaces
prevent any "sticking" of the hand
to the handle, making rapid
repositioning of the hand possible.
Web link
https://products.wera.de/en/tools_for_electricians_kraftform_plus__series_100_vde_162_i_ph_s_sb.html
Wera - 162 i PH/S SB Wera Werkzeuge GmbH
05100020001 - 4013288186577 Korzerter Straße 21-25
D-42349 Wuppertal
Tel: +49 (0)2 02 / 40 45-0
14.02.2021 - 2 / 2 E-Mail: info@wera.de
Powered by TCPDF (www.tcpdf.org)