TOOLS & NOZZLES
Jetstream.
20,000 PS! (1,379 BAR)
oe MP
i
eur
NOTE! Gap nezalesseld separately
Tan nan gy
TUBE SPINNER™
TUBE CLEANING NOZZLES
Jetstream Tube Spinner Nozzles provide the most thorough cleaning of
tube walls, Maximum impact and the elimination of streaking result from
having two larger spinning jets rather than several smaller non-rotating jets.
* Self-rotating sleeve has two radial jets that spin at high speed for
‘complete coverage.
Simple two piece design features a nozzle body, specially coated for
maximum lubricity and surface hardness, and a stainless steel sleeve,
hardened to extend orifice life and precision honed to prevent galling,
A thin layer of water between the nozzle body and sleeve provides a
liquid bearing on which the sleeve spins, No ball bearings to replace!
HPFR/HPFL or HPER/HPEL tube cleaning nozzles are connected
to the tube spinner nozzle to add forward jets for unplugging tubes
and/or rearward jets to pull nozzles and flex lance through tube (sold
separately)
*» HPFR/HPFL nozzle blanks, sold below, can be installed in place of
HPFR/HPFL or HPER/HPEL nozzles when no forward or rearward jets.
are required.
* Tube Spinner outside diameters are the same as standard tube
cleaning nozzles,
* Custom flow rates available for special applications.
FLOW AT SPECIFIED PRESSURES (PU Bay
FLOW) conwecrions= ie fae | To000 12,500 psi 15,000
sso | eve | uo “Egan centromere
PARTNO. | PART NO. | PART NO. Lengths are HPFR and HPFL/HPER and HPEL respectively.
seo | stose | sue
e206 | s42se | oate8
ous
US & Canada: 800-281-8192 or 832-590-1300TOOLS & NOZZLES
20,000 PSI (1,379 BAR)
Herr a HPL
PR & HrrL2
PR a HeLa
een a HPELT
pene a wreL2
! i
q
e
a
f
:
Jetstream.
Teron Ay
HPFR/HPFL TUBE CLEANING NOZZLES
= Designed for use with flex or rigid lances.
‘= HPFR nozzles feature right-hand female medium pressure
tube connections.
‘+ HPFL nozzles feature left-hand female medium pressure
tube connections.
‘+ Recessed orifices provide protection from surface abrasion
that could distort waterjets,
+ Both series have three sizes with six patterns each and
fourteen flow ratings to choose.
‘* Custom patterns and flows available.
HPER/HPEL TUBE CLEANING NOZZLES
* Designed for use with flex or rigid lances.
* HPER nozzles feature right-hand female medium pressure
tube connections,
+ HPEL nozzles feature left-hand female medium pressure
tube connections.
* Two rows for rearward jets provide extra flushing power
while special nose design allows for a greater number and
optimal positioning of forward jets for unplugging,
* Both series have three sizes with six patterns each and
fourteen flow ratings to choose.
* Custom patterns and flows available.
HPM TUBE CLEANING NOZZLES
+= Designed specifically for use with Jetstream flex lances.
‘+ Right-hand threaded male Jetstream Lance connections.
‘+ Compact design easily navigates sharp bends.
‘+ Three sizes with six patterns each and fourteen flow ratings
to choose.
‘+ Custom patterns and flows available.
Nozsles shown a actual sie
‘vwewaterblastcom
or
ees
Brystrd