Professional Documents
Culture Documents
■ Chain Device
When installing a BB mount-type chain device to a
bicycle, refer to the table below to determine the number Adapter Adapter
of spacers for the right side. If the thickness of the
spacers used is not as given in the table, the front
chainwheel may become loose and fall off, or problems ■ Spacer installation method
with gear shifting may occur. When installing a BB mount- The example in the (1) Check whether the width of the bottom bracket shell is 68 mm or
type chain device or a ISCG-type chain device to a illustration shows a BB 73 mm.
mount-type chain device.
bicycle, you need to be careful to avoid interference. (2) Next, install the adapter while referring to the illustrations below.
68 / 73 mm
<Chain Device Thickness (BB mount)> <Normal type>
Bottom bracket shell width
Model number Bottom bracket When using a band-type When using a bracket-type
68 mm 73 mm 83 mm Spacer
shell width front derailleur front derailleur
For chain device FC-M810-1 FC-M665
thickness of 2.5 mm FC-M810-2 FC-M665
2.5 mm x 1 Not needed * (1.8mm) (0.7mm) (2.5mm) BB mount-
type bracket
(2.5mm)
When using in combination with the FD-M665-E (2.5 mm chain device) * If using three 2.5 mm spacers with a band type and a bottom bracket shell having a width of 68 mm,
install the three spacers so that there are two on the right and one on the left.
Bottom bracket shell width
Model number <Chain case specifications>
68 mm 73 mm 83 mm
Bottom bracket
FC-M665 FC-M810-2 Not needed No available Spacer
shell width
Chaincase stay
FC-M815-2 Not needed
<Installation method> 68 mm A
F BB mount-type
68 mm
bracket 2.5 mm
Install the chain device and the front (2.5mm)
x2
derailleur as shown in the illustration. (2.5mm) (0.7mm)
• If using in combination with an BB mount- 1.8 mm*
type front derailleur, make sure that the x1
chain device does not obstruct the BB 0.7 mm
A Chain Device
mount-type bracket. F x1
73 mm
A : 2.5 mm spacer
F
SM-BB70 / BB51 / BB50 Industrieweg 24, 8071 CT Nunspeet, The Netherlands Phone: +31-341-272222 3-77 Oimatsu-cho, Sakai-ku, Sakai-shi, Osaka 590-8577, Japan
Please note: specifications are subject to change for improvement without notice. (English)
00 © Feb. 2009 by Shimano Inc. XBC IZM Printed in Malaysia.