Fire Alarm System Inspection Check List

The purpose of this checklist is to give the inspector a quick and easy guideline to follow
when he or she is conducting a final inspection of a newly installed Fire Alarm System.

Inspection Date: _________________ Inspector: ______________________________

Manufacture of Fire Alarm System: ________________________________________

Fire Alarm System Model Number: ________________________________________

Type of Fire Alarm System Single Stage Two Stage

Third Party Fire Alarm Verification Report Received? Yes No N/A

Fire Alarm Monitored? Yes No N/A
Fire Alarm Monitoring Company. Yes No N/A

Special Devices Connected to Fire Alarm System

Fire Doors equipped with magnetic hold open devises Yes No N/A
Commercial Cooking shut off devise Yes No N/A
Roll down doors or shutters Yes No N/A
Voice Communication System Yes No N/A

Visual Check the Following Devices and Displays

If a No is indicated below note the problem to the right

Main Fire Alarm Panel

Zones properly indicated and marked Yes No

Devices properly indicated and marked Yes No
Power indicator lamp operational Yes No
Panel clear from trouble indicators Yes No
Lamp test Yes No

Annunciator Panel

Panel in an acceptable location Yes No

Panel lamp test ok Yes No
Power on lamp on Yes No
Pull Station locations acceptable Yes No
Heat Detectors and/or Smoke Detectors Yes No
locations acceptable
Fire Alarm System Demonstration

Notify Fire Department of the Fire Alarm Test. Include the address and how long the test
should last. Have dispatch contact you when they receive the notification of alarms
activated from the monitoring company.

If a No is indicated below note the problem to the right

Fire location lamp on main panel Yes No

operated correctly
Bells and buzzers operated correctly Yes No
Bells and Buzzers Audibility Yes No
Monitoring company notified Fire Yes No
Station
Annunciator Panel Indicated Proper Yes No
Zone or location.
System back on line No problems Yes No
indicated on panels