Professional Documents
Culture Documents
1. Contents
2. Optional Components
aRacer ECU
DG1
aRacer ECU
*Module wiring including in AF1 must be purchased separately
Battery negative
Fuse
DG1
+12V Sport D
*1 to 5 expansion cable
needs to be purchased
separately
aRacer ECU
>5.0 cm
>30֯ deg
▲ If stock narrowband O2 sensor is existed ▲ Keep O2 sensor 10cm away from bend
with wideband one, the distance should and catalyst to avoid the affection.
be over 5cm and the installation angle
should be over 30 deg between each other.
2 seconds
AF2_A
AF2_B
AF2_C
AF2_D
8. Precautions
• When installing the wideband oxygen sensor on the exhaust pipe, please confirm that you
can screw the entire oxygen sensor into the opening of the exhaust pipe with your bare
hands.
• If the sensor is stuck by something, please check whether there is some debris in the
oxygen sensor seat of the pipe. If necessary, use a tool to trim the unevenness in the
oxygen seat. Do not use a tool to forcibly lock it in. When the exhaust pipe is heated and
expands, it may cause the oxygen sensor to be damaged due to the extrusion of the
exhaust pipe.
• Please ensure that power supply provides a voltage at least 12V for AF2 module to work
well.
• Please make sure that the engine and the body are well grounded. Poor grounding may
cause damage to the AF2 module.