This document provides instructions for sewing a pocket onto pants with a side seam in 6 steps:
1. Cut the fabric pieces for the front and back of the pants and the pocket lining according to the pattern.
2. Mark and cut the opening for the pocket and reinforce it with fusible tape.
3. Attach the pocket lining to the front pants piece with a 0.5-1 cm seam and notch the corners.
4. Topstitch the lining 0.1 cm from the edge and press the seam allowance.
5. Topstitch the camouflage strip along the edge of the pocket lining with a 0.5-0.7 cm seam.
6
This document provides instructions for sewing a pocket onto pants with a side seam in 6 steps:
1. Cut the fabric pieces for the front and back of the pants and the pocket lining according to the pattern.
2. Mark and cut the opening for the pocket and reinforce it with fusible tape.
3. Attach the pocket lining to the front pants piece with a 0.5-1 cm seam and notch the corners.
4. Topstitch the lining 0.1 cm from the edge and press the seam allowance.
5. Topstitch the camouflage strip along the edge of the pocket lining with a 0.5-0.7 cm seam.
6
This document provides instructions for sewing a pocket onto pants with a side seam in 6 steps:
1. Cut the fabric pieces for the front and back of the pants and the pocket lining according to the pattern.
2. Mark and cut the opening for the pocket and reinforce it with fusible tape.
3. Attach the pocket lining to the front pants piece with a 0.5-1 cm seam and notch the corners.
4. Topstitch the lining 0.1 cm from the edge and press the seam allowance.
5. Topstitch the camouflage strip along the edge of the pocket lining with a 0.5-0.7 cm seam.
6
Pancenco Ana 1. Детали кроя: Ткань верха переднее полотнище брюк покроить в соответствии с лекалом – 1 деталь. Ткань верха заднее полотнище брюк покроить в соответствии с лекалом – 1 деталь. Клеевая для дублирования линии входа в карман -1 деталь Подкладка в соответствии с лекалом - 2 детали. Подзор кармана – 1 деталь 1. Reperele croiului:
Reperul anterior al pantalonului, se croiește conform șablonului-1 reper.
Reperul posterior al pantalonului, se croiește conform șablonului – 1 reper. Inserția pentru dublarea intrării buzunarului – 1 reper. Căptușeala se croiește conform șablonului – 2 repere. Fâșie de camuflaj – 1 reper. 2. Разметить месторасположения входа в карман. Отрезать по намеченной линии. Продублировать клеевой вход в карман. Обметать откосок. 2. Marcarea liniei de intrare în buzunar. Tăierea surplusului. Dublarea intrării în buzunar. Surfilarea fâșiei de camuflaj 3. Притачать подкладку к передней половинке брюк. Ширина шва 0,5-1,0 см. Надсечь в уголке, не доходя до строчки 0,1-0,2 см. 3. Întighelarea căptușelei pe versul reperul anterior al pantalonilor, uniformizând marginile laterale și superioare. Distanța de la tăietură 0,5-1,0 cm. Crestarea în unghi, neajungând până la tighel 0,1-0,2 cm. 4. Проложить техническую строчку по подкладке на 0,1 см. С помощью утюга оформляем перекант.
4. Depunerea tighelului tehnic pe căptușeală la distanța de 0,1 cm. Cu ajutorul
fierului de calcat formăm vipușca 5. Настрочить подзор на подкладку кармана по краю. Ширина шва 0,5-0,7 см. 5. Aplicarea fâșiei de camuflaj pe căptușeala buzunarului. Rezerva cusăturii 0,5-0,7 cm. 6. Уровнять срезы подкладки, заколоть иголками. Стачать подкладку кармана ширина шва 1,0-1,5 см. Обметать. Стачать, обметать боковой шов брюк. ВТО готового кармана.
6.Punga buzunarului cu clinul lateral se apleacă peste punga buzunarului,
uniformizând marginile laterale și superioare se fixează cu acele de siguranță și se asamblează la distanța de 1,0-1,5 cm, apoi acestea se surfilează. Tighelarea cusăturii laterale, surfilarea rezervei. TUT final al buzunarului.