re
AS HW P3.Q1
In this experiment you will investigate how the characteristics of a circuit vary with its
resistance,
(a) Connect the circuit of Fig. 1.1
You should expect to spend at least 15 minutes setting up your circult.
(b) (1) Close the switch,
(i) Adjust the variable resistor until the current reading is at a maximum.
Measure and record the ammeter reading I and the voltmeter reading V.4
(c) Adjust the variable resistor and repeat (b){Ill) until you have six sets of values of I
and V. Include values of + and Zin your table.
Open the switch when you have taken all your readings.
i Viv z v7
48 797 | D.208 0.0012
4.6 7717 0.277 0.001
43 713 | 023% | H001K)
4l 696 | ALEY| oaks
4.0 658 G25 | 0.0064
3.9 649 O26 | a00[S
(@) (i) Plot a graph of } on the y-axis against en the xaxis.
(ii) Draw the straight line of best fi
(iii) Determine the gradient and the y-intercept of this line
‘al
(3)15
oll Cee. 060% KE g.O01F A615 0.00L7 +6
(e) It is suggested that the quantities / and Vare related by the equation
1_3R,
T Vv k
where R and k are constants.
Use your answer in (dil) to determine the value of R
Give appropriate units. { +t SR tk
Zhe fs =-¥
Ranga
fe Be” AS
VV 5 Re LR De
AO RK =e
1.1.4 Use An Eyepiece Graticule and Stage Micrometer Scale To Make Measurements and Use The Appropriate Units Millimetre (MM) Micrometre ( M) and Nanometre (NM)