Professional Documents
Culture Documents
Parker Sanitary Fittings - June 09 - Final LowRes
Parker Sanitary Fittings - June 09 - Final LowRes
Components
Catalog 4270-Sanitary / ASME-BPE Fittings June 2009
Introduction Catalog
Catalog 4270
4270
WArNING
FAILURE, IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR
GENERAL INFORMATION
SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL
INJURY AND PROPERTY DAMAGE.
Sanitary Flow Components...............Page 35
This document and other information from Parker Hannifin Corporation, its subsidiaries and
authorized distributors provide product and/or system options for further investigation by
Reference Charts..............................Page 36
users having technical expertise. It is important that you analyze all aspects of your
application and review the information concerning the product or system in the current Offer Of Sale.....................................Page 38
product catalog. Due to the variety of operating conditions and applications for these
products or systems, the user, through its own analysis and testing, is solely responsible for Parker Group Overview.....................Page 39
making the final selection of the products and systems and assuring that all performance,
safety and warning requirements of the application are met.
The products described herein, including without limitation, product features, specifications,
designs, availability and pricing, are subject to change by Parker Hannifin Corporation and
its subsidiaries at any time without notice. Offer of Sale
The items described in this document are hereby offered for sale by Parker Hannifin
Corporation, its subsidiaries or its authorized distributors. This offer and its acceptance are
governed by the provisions stated in the Parker Performance Stainless Catalog 4270.
Copyright 2009, Parker Hannifin Corporation. All Rights Reserved.
WArNING
2 FAILURE, IMPROPER SELECTION OR IMPROPER Parker Hannifin
USE OF THECorporation
PRODUCTS AND/OR
SYSTEMS DESCRIBED HEREIN OR RELATED Instrumentation Products
ITEMS CAN CAUSE DEATH, Division
PERSONAL
INJURY AND PROPERTY DAMAGE. Huntsville, AL USA
http://www.parker.com/ipdus
This document and other information from Parker Hannifin Corporation, its subsidiaries and
authorized distributors provide product and/or system options for further investigation by
users having technical expertise. It is important that you analyze all aspects of your
Catalog
Catalog4270
4270
Ordering Information
To specify the part completely, start with the description and select each of the additional options shown below.
Be sure to denote the material and polish combination. See the example below.
2wcL
2wK
L2CM – 90° Clamp One End
SIZE A B C nominal wall
(inches) (inches) (inches) thickness
1.0 2.062 2.562 .065
1.5 2.937 3.437 .065
2.0 4.062 4.562 .065
2.5 5.187 5.687 .065
3.0 6.312 6.812 .065
L2CM
4.0 8.312 8.937 .083
6.0 9.000 9.750 .109
7W – Tee “Short”
SIZE B NOM. wall
(inches) (inches) thickness
1.0 1.125 .065
1.5 1.656 .065
2.0 2.062 .065
2.5 2.344 .065
7W “Short” 3.0 2.594 .065
4.0 3.438 .083
L9W – Cross
SIZE A B C nominal wall
(inches) (inches) (inches) thickness
1.0 1.125 2.250 .065
1.5 1.656 3.312 .065
2.0 2.062 4.125 .065
2.5 2.343 4.687 .065
3.0 2.593 5.187 .065
4.0 3.437 6.875 .083
L9W 6.0 5.000 10.00 .109
7MP – Tee
SIZE A B
(inches) (inches) (inches)
1.0 2.375 4.750
1.5 2.750 5.500
2.0 3.500 7.000
2.5 3.500 7.000
7MP 3.0 3.750 7.500
4.0 4.500 9.000
6.0 7.150 14.300
9MP – Cross
SIZE A B
(inches) (inches) (inches)
38 – Blind Flange
SIZE A OD E F G OAL
(inches) (inches) (inches) (inches) (inches) (inches)
.500 3.500 .625 4 2.375 .375
.750 3.875 .625 4 2.750 .375
1.000 4.250 .625 4 3.125 .375
1.250 4.620 .625 4 3.500 .375
1.500 5.000 .625 4 3.875 .375
2.000 6.000 .750 4 4.750 .438
2.500 7.000 .750 4 5.500 .438
3.000 7.500 .750 4 6.000 .438
4.000 9.000 .750 8 7.500 .500
5.000 10.00 .875 8 8.500 .500
6.000 11.00 .875 8 9.500 .563
8.000 13.00 .875 8 11.75 .563
10.00 16.00 1.00 12 14.25 .688
12.00 19.00 1.00 12 17.00 .688
38 Blind Flange
Product Listing
Clamp gaskets Screen gaskets John perry gaskets
40mpu (Buna) 40mpsu (Std #10 Mesh*) 40jpu (Buna)
40mpuw (Buna-White) 40mpup (Std #33 Perforated*)
40mpx (Silicone-White) *Other mesh sizes available
40mpxc (Silicone-Clear) q-line gaskets
40mpg (PTFE) 40qh (Buna)
40mpe (epdm) bevel seat gaskets 40qt (ptfe)
40mpsfy (Sfy) 40bso (Buna)
40mpfu (Buna-Flanged) 40bss-(tm) (ptfe)
40mpfe (epdm-Flanged) dhr(t) (ptfe-Medium) apc gaskets
40mpfx (Silicone-White-Flanged) dh(xt) (ptfe-Extra Thin) 101h (Gray)
40mpfxc (Silicone-Clear-Flanged) 40bsh(thd) (ptfe-Heavy Duty) 101hx (Black)
40mpfsfy (Sfy-Flanged) 40bsf (Flat)
a40mpgr (ptfe-Envelope)
I-Line gaskets
Orifice gaskets 40ih (Buna)
a80mpu (Buna-Std 1/8" Orifice) 40ie (epdm)
a80mpe (epdm-Std 1/8" Orifice) 40it (ptfe) View Our Material Compatibility Chart
40iv (sfy) (page 36)
a80mpsfy (sfy-Std 1/8" Orifice)
B7WWM – Tee
SIZE A B
(inches) in. mm. in. mm.
.500 1.875 47.6 2.375 60.3
.750 2.0 50.8 2.5 63.5
1.000 2.125 54.0 2.625 66.7
1.500 2.375 60.3 2.875 73.0
2.000 2.875 73.0 3.375 85.7
2.500 3.125 79.4 3.625 92.1
3.000 3.375 85.7 3.875 98.4
4.000 4.125 104.8 4.75 120.7
6.000 5.625 142.9 7.125 181.0
Sanitary Stainless Parker Sanitary Stainless offers a wide variety of sanitary flow components
for use within the Food, Beverage, Dairy and Pharmaceutical processing
Product Family industries. For additional information on any of the products shown below,
contact your Parker distributor, or call 256-881-2040.
Chemical Compatibility Polymer Reference Guide CODE: E=Excellent G=Good F=Fair NR=Not Recommended
*PSI ratings based on hydrostatic test using standard gaskets molded from
Buna-N. Ratings assume proper installation of ferrules, joint assembly and the
absence of any shock pressure. Please contact Parker Hannifin for ratings at
higher temperatures or utilizing other materials. For temperatures above 250° F,
only 13MHP clamps are recommended.
The items described in this document and other documents or descriptions provided by Parker Hannifin Corporation, its subsidiaries
and its authorized distributors are hereby offered for sale at prices to be established by Parker Hannifin Corporation, its subsidiaries
and its authorized distributors. This offer and its acceptance by any customer ("Buyer") shall be governed by all of the following Terms
and Conditions. Buyer’s order for any such items, when communicated to Parker Hannifin Corporation, its subsidiary or an authorized
distributor ("Seller") verbally or in writing, shall constitute acceptance of this offer.
1. Terms and Conditions of Sale: All descriptions, quotations, proposals, Seller shall have the right to alter, discard or otherwise dispose of
offers, acknowledgments, acceptances and sales of Seller’s products are any special tooling or other property in its sole discretion at any time.
subject to and shall be governed exclusively by the terms and conditions 8. Buyer’s Property: Any designs, tools, patterns, materials, drawings,
stated herein. Buyer’s acceptance of any offer to sell is limited to these confidential information or equipment furnished by Buyer or any other
terms and conditions. Any terms or conditions in addition to, or inconsistent items which become Buyer’s property, may be considered obsolete
with those stated herein, proposed by Buyer in any acceptance of an offer and may be destroyed by Seller after two (2) consecutive years have
by Seller, are hereby objected to. No such additional, different or inconsis- elapsed without Buyer placing an order for the items which are manu-
tent terms and conditions shall become part of the contract between Buyer factured using such property, Seller shall not be responsible for any loss
and Seller unless expressly accepted in writing by Seller. Seller’s accep- or damage to such property while it is in Seller’s possession or control.
tance of any offer to purchase by Buyer is expressly conditional upon 9. Taxes: Unless otherwise indicated on the face hereof, all prices and
Buyer’s assent to all the terms and conditions stated herein, including any charges are exclusive of excise, sales, use, property, occupational or like
terms in addition to, or inconsistent with those contained in Buyer’s offer, taxes which may be imposed by any taxing authority upon the manufac-
Acceptance of Seller’s products shall in all events constitute such assent. ture, sale or delivery of the items sold hereunder. If any such taxes must
2. Payment: Payment shall be made by Buyer net 30 days from the date be paid by Seller or if Seller is liable for the collection of such tax, the
of delivery of the items purchased hereunder. Amounts not timely paid amount thereof shall be in addition to the amounts for the items sold.
shall bear interest at the maximum rate permitted by law for each month Buyer agrees to pay all such taxes or to reimburse Seller therefore upon
or portion thereof that the Buyer is late in making payment. Any claims by receipt of its invoice. If Buyer claims exemption from any sales, use or
Buyer for omissions or shortages in a shipment shall be waived unless other tax imposed by any taxing authority, Buyer shall save Seller harm-
Seller receives notice thereof within 30 days after Buyer’s receipt of the less from and against any such tax, together with any interest or penal-
shipment. ties thereon which may be assessed if the items are held to be taxable.
3. Delivery: Unless otherwise provided on the face hereof, delivery shall 10. Indemnity For Infringement of Intellectual Property Rights: Seller
be made F.O.B. Seller’s plant. Regardless of the method of delivery, how- shall have no liability for infringement of any patents, trademarks, copy-
ever, risk of loss shall pass to Buyer upon Seller’s delivery to a carrier. rights, trade dress, trade secrets or similar rights except as provided in
Any delivery dates shown are approximate only and Seller shall have no this Part 10. Seller will defend and indemnify Buyer against allegations of
liability for any delays in delivery. infringement of U.S. Patents, U.S. Trademarks, copyrights, trade dress and
4. Warranty: Seller warrants that the items sold hereunder shall be free trade secrets (hereinafter ‘Intellectual Property Rights’). Seller will defend
from defects in material or workmanship for a period of 18 months from at its expense and will pay the cost of any settlement or damages awarded
date of shipment from Parker Hannifin Corporation. THIS WARRANTY in an action brought against Buyer based on an allegation that an item
COMPRISES THE SOLE AND ENTIRE WARRANTY PERTAINING sold pursuant to this contract infringes the Intellectual Property Rights of a
TO ITEMS PROVIDED HEREUNDER. SELLER MAKES NO OTHER third party. Seller’s obligation to defend and indemnify Buyer is contingent
WARRANTY, GUARANTEE, OR REPRESENTATION OF ANY KIND on Buyer notifying Seller within ten (10) days after Buyer becomes aware
WHATSOEVER. of such allegations of infringement, and Seller having sole control over the
ALL OTHER WARRANTIES, INCLUDING BUT NOT LIMITED TO, defense of any allegations or actions including all negotiations for settle-
MERCHANTABILITY AND FITNESS FOR PURPOSE, WHETHER ment or compromise. If an item sold hereunder is subject to a claim that it
EXPRESS, IMPLIED, OR ARISING BY OPERATION OF LAW, TRADE infringes the Intellectual Property Rights of a third party, Seller may, at its
USAGE, OR COURSE OF DEALING ARE HEREBY DISCLAIMED. sole expense and option, procure for Buyer the right to continue using said
NOTWITHSTANDING THE FOREGOING, THERE ARE NO item, replace or modify said item so as to make it noninfringing, or offer
WARRANTIES WHATSOEVER ON ITEMS BUILT OR ACQUIRED to accept return of said item and return the purchase price less a reason-
WHOLLY OR PARTIALLY,TO BUYER’S DESIGNS OR SPECIFICATIONS. able allowance for depreciation. Notwithstanding the foregoing, Seller shall
5. Limitation Of Remedy: SELLER’S LIABILITY ARISING FROM OR IN have no liability for claims of infringement based on information provided
ANY WAY CONNECTED WITH THE ITEMS SOLD OR THIS CONTRACT by Buyer, or directed to items delivered hereunder for which the designs
SHALL BE LIMITED EXCLUSIVELY TO REPAIR OR REPLACEMENT OF are specified in whole or part by Buyer, or infringements resulting from the
THE ITEMS SOLD OR REFUND OF THE PURCHASE PRICE PAID BY modification, combination or use in a system of any item sold hereunder.
BUYER, AT SELLER’S SOLE OPTION. IN NO EVENT SHALL SELLER The foregoing provisions of this Part 10 shall constitute Seller’s sole and
BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL exclusive liability and Buyer’s sole and exclusive remedy for infringement of
DAMAGES OF ANY KIND OR NATURE WHATSOEVER, INCLUDING Intellectual Property Rights. If a claim is based on information provided by
BUT NOT LIMITED TO LOST PROFITS ARISING FROM OR IN ANY WAY Buyer or if the design for an item delivered hereunder is specified in whole
CONNECTED WITH THIS AGREEMENT OR ITEMS SOLD HEREUNDER, or in part by Buyer, Buyer shall defend and indemnify Seller for all costs,
WHETHER ALLEGED TO ARISE FROM BREACH OF CONTRACT, expenses or judgments resulting from any claim that such item infringes any
EXPRESS OR IMPLIED WARRANTY, OR IN TORT, INCLUDING patent, trademark, copyright, trade dress, trade secret or any similar right.
WITHOUT LIMITATION, NEGLIGENCE, FAILURE TO WARN OR STRICT 11. Force Majeure: Seller does not assume the risk of and shall not be
LIABILITY. liable for delay or failure to perform any of Seller’s obligations by reason of
6. Changes, Reschedules and Cancellations: Buyer may request to circumstances beyond the reasonable control of Seller (hereinafter ‘Events
modify the designs or specifications for the items sold hereunder as well of Force Majeure’). Events of Force Majeure shall include without limita-
as the quantities and delivery dates thereof, or may request to cancel all tion, accidents, acts of God, strikes or labor disputes, acts, laws, rules or
or part of this order, however, no such requested modification or cancel- regulations of any government or government agency, fires, floods, delays
lation shall become part of the contract between Buyer and Seller unless or failures in delivery of carriers or suppliers, shortages of materials and
accepted by Seller in a written amendment to this Agreement. Acceptance any other cause beyond Seller’s control.
of any such requested modification or cancellation shall be at Seller’s dis- 12. Entire Agreement/Governing Law: The terms and conditions set forth
cretion, and shall be upon such terms and conditions as Seller may require. herein, together with any amendments, modifications and any different
7. Special Tooling: A tooling charge may be imposed for any special terms or conditions expressly accepted by Seller in writing, shall consti-
tooling, including without limitation, dies, fixtures, molds and patterns, tute the entire Agreement concerning the items sold, and there are no
acquired to manufacture items sold pursuant to this contract. Such oral or other representations or agreements which pertain thereto. This
special tooling shall be and remain Seller’s property notwithstand- Agree-ment shall be governed in all respects by the law of the State of
ing payment of any charges by Buyer. In no event will Buyer acquire Ohio. No actions arising out of the sale of the items sold hereunder or this
any interest in apparatus belonging to Seller which is utilized in the Agreement may be brought by either party more than two (2) years after
notwithstanding any charges paid by Buyer. Unless otherwise agreed, the cause of action accrues.
9/91-P
FLUID & GAS HANDLING HYDRAULICS PNEUMATICS PROCESS CONTROL SEALING & SHIELDING
Key Markets Key Markets Key Markets Key Markets Key Markets
• Aerospace • Aerospace • Aerospace • Chemical & refining • Aerospace
• Agriculture • Aerial lift • Conveyor & material handling • Food, beverage & dairy • Chemical processing
• Bulk chemical handling • Agriculture • Factory automation • Medical & dental • Consumer
• Construction machinery • Construction machinery • Life science & medical • Microelectronics • Energy, oil & gas
• Food & beverage • Forestry • Machine tools • Oil & gas • Fluid power
• Fuel & gas delivery • Industrial machinery • Packaging machinery • Power generation • General industrial
• Industrial machinery • Mining • Transportation & automotive • Information technology
• Mobile • Oil & gas Key Products • Life sciences
• Oil & gas • Power generation & energy Key Products • Analytical sample • Military
• Transportation • Truck hydraulics • Air preparation conditioning products • Semiconductor
• Welding • Brass fittings & valves & systems • Telecommunications
Key Products • Manifolds • Fluoropolymer chemical • Transportation
Key Products • Diagnostic equipment • Pneumatic accessories delivery fittings, valves
• Brass fittings & valves • Hydraulic cylinders • Pneumatic actuators & grippers & pumps Key Products
• Diagnostic equipment & accumulators • Pneumatic valves & controls • High purity gas delivery • Dynamic seals
• Fluid conveyance systems • Hydraulic motors & pumps • Quick disconnects fittings, valves & regulators • Elastomeric o-rings
• Industrial hose • Hydraulic systems • Rotary actuators • Instrumentation fittings, • EMI shielding
• PTFE & PFA hose, tubing & • Hydraulic valves & controls • Rubber & thermoplastic hose valves & regulators • Extruded & precision-cut,
plastic fittings • Power take-offs & couplings • Medium pressure fittings fabricated elastomeric seals
• Rubber & thermoplastic hose • Rubber & thermoplastic hose • Structural extrusions & valves • Homogeneous & inserted elastomeric
& couplings & couplings • Thermoplastic tubing & fittings • Process control manifolds shapes
• Tube fittings & adapters • Tube fittings & adapters • Vacuum generators, cups & sensors • High temperature metal seals
• Quick disconnects • Quick disconnects • Metal & plastic retained composite
seals
• Thermal management
Sales Offices Worldwide
Parker Hannifin Corporation
Instrumentation Products Division
1005 A Cleaner Way
Huntsville, AL 35805
USA
phone 256 881 2040
fax 256 8815072
www.parker.com/ipdus