Professional Documents
Culture Documents
Tech Tool Instructions T2 - S1685 - v2.0
Tech Tool Instructions T2 - S1685 - v2.0
1 a. Before connecting VOCOM II, update Tech Tool to latest (at least to
2.8.31) update APCI database (TechTool > update product information).
Make sure to check the “Synchronize user profile” box.
This is to enable the third part of the instruction, CVSU programming.
Which is created to update a complete vehicle with less manual actions.
b. Open Client Update. Download the SEM file spotted below. File name
may differ from screenshot below.
2
Version 2.0
3
Version 2.0
TGW3 PROD HW – IF not correct, then go back to the TGW part in S1415/Bravo
instruction.
Contact TDS.
- P/N needed 23792143 Europe
- P/N needed 23792252 South America and India
Run Kit: 85157877
IF a new SIM-card EUICC, received from campaign insert in TGW3 and follow
separate instruction
“39806-2 Telematic SIM card, replace”
“39733-3 Telematics System SIM ID“
If the second part, connection test is not green, run the third part of the operation as well.
Note: If connection setup is not green, wait another 15-30 mins and try again.
4
Version 2.0
SEM2 PROD HW – IF not correct, then go back to the SEM part in S1415/Bravo instruction.
Contact TDS.
- DAB P/N 23893653 (spare part) or 23893650 (seen by TT)
- UDAB P/N 23893654 (spare part) or 23893652 (seen by TT)
Note:
Some vehicles may have a mismatch on FP-CAM. Regardless of this, it is not a stopper going
forward. At this point there is no way to resolve this mismatch.
“Replace HW” will not work. After operation is done, please check functionality.
IF navigation is failing due to map missing then you need to acquire a USB drive with correct
location according to truck specification in VDA.
Contact TDS.
IF you instead encounter problems relating to GPS, please drive the truck for an hour to have
the connection okay. IF there is still issue then contact TDS.
5
Version 2.0
Go to “Program” tab and select “Program Control Unit” and then make sure “Complete
vehicle software update” is selected.
There you will, at this time, find a service pack named “24_T2_1.3”. Depending on when you
do this action, the service pack and name can be updated.