Professional Documents
Culture Documents
RVD 8090
RVD 8090
T D A S
AUDIO/VIDEO RECEIVER RVD-8090R T0TALLY DISCRETE AMPLIFIER STAGE
STANDBY
MASTER VOLUME
TAPE
SPEAKER
MONITOR
VIDEO
VIDEO L AUDIO R
RVD-8090R
AUDIO/VIDEO RECEIVER
Introduction
UNPACKING AND INSTALLATION
ENGLISH
WARNING
2
READ THIS BEFORE OPERATING YOUR UNIT
ENGLISH
FOR U.S.A. AND CANADA ...............................120 V FOR OTHER COUNTRIES...................... 110 V/220 V
3
CONTENTS
ENGLISH
Introduction
UNPACKING AND INSTALLATION ....................................................................................................... 2
READ THIS BEFORE OPERATING YOUR UNIT................................................................................... 3
Operations
ADJUSTING SPEAKER SETTINGS........................................................................................................ 11
ADJUSTING DELAY TIMES................................................................................................................... 13
LISTENING TO A PROGRAM SOURCE................................................................................................ 14
SURROUND SOUND................................................................................................................................ 17
ENJOYING SURROUND SOUND........................................................................................................... 18
LISTENING TO RADIO BROADCASTS ................................................................................................ 19
RECORDING ............................................................................................................................................. 21
OTHER FUNCTIONS................................................................................................................................ 22
4
System Connections
When making system connections, please be certain the AC cord is not plugged into an AC outlet.
When making connections between components, please be sure to connect the white RCA plugs to the L(left) and the red
RCA plugs to the R (right) jacks respectively.
ENGLISH
Change the position of the FM indoor antenna until you get the best possible reception of your favorite FM stations.
A 75 ohm outdoor FM antenna may be used to further improve the reception. Disconnect the indoor antenna before
connecting the outdoor antenna.
Place the AM loop antenna as far as possible from the receiver, TV set, speaker cords and the AC input cord and set if to a
direction it to a for the best reception.
If the reception is poor with the AM loop antenna, an AM outdoor antenna can be used with the AM loop antenna.
Make connections firmly and correctly. If not, it can cause loss of sound, noise or damage to the receiver.
If the electricity fails or the AC input cord is left unplugged for more than 2 weeks, the memorized contents will be lost.
Memorize them again.
■ CONNECTING ANTENNAS
E85649
29Z3
LISTED
AC INPUT AUDIO EQUIPMENT
120V~60Hz
COAXIAL 1 3.5A R
C R
CD
FM AM
LOOP
L R
FRONT PLAY
FRONT
SPEAKERS
(8Ω)
MODEL NO. RVD-8090R
AUDIO/VIDEO RECEIVER
MADE IN KOREA
DESIGNED IN USA
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and
(2)this device must accept any interference received,
including interference that may cause undesired operation.
AC-3/PCM
TAPE MON.
REC R L
SER. NO
Manufactured under license from Dolby Laboratories.
"Dolby"."PRO LOGIC" and the double-D symbol are
FM VIDEO trademarks of Dolby Laboratories. Confidential Unpublished
SUB OPTICAL 1 CAUTION
75Ω CENTER MON. Works. ©1992-1997 Dolby Laboratories, Inc. All rights reserved.
WOOFER AUX
OUT REAR RISK OF ELECTRIC SHOCK
DO NOT OPEN
SPEAKERS
(8Ω)
WARNING:"SHOCK HAZARD-DO NOT OPEN"
FRONT
DVD/ AVIS:"RISQUE DE CHOC-ELECTRIQUE-NE PAS OUVRIR"
TV
ANTENNA
6-CH
DIRECT REAR
INPUT OPTICAL 2 AC OUTLET
IN
DIGITAL
INPUTS Manufactured under license from Digital Theater Systems, Inc.
SUB
VCR1
CENTER US Pat. No. 5,451,942 and other world-wide patents issues and
WOOFER
Pending. "DTS", "DTS Digital surround", are trademarks of Digital
OUT
Theater Systems, Inc. Copyright 1996 Digital Theater System, Inc.
L R CENTER SPEAKER(8Ω) SWITCHED
DIGI-LINK 120V~60Hz All Rights Reserved.
VIDEO L R 100W 1A MAX
BC
HIGH NORM M RELAY P
T SIZE MEMORY B/C/OFF
CD SYN MPX MIN SEC
REC REC
L
R PLAY REVERSE
dB -00 -20 -10 -6 -3 0 +3 +6
R
AMS
HIGH
AMS
A
HX-PRO
RECORD & PLAY/AUTO TAPE SELECTOR PLAY(LINE OUT)
POWER PHONES REC LEVEL REC BALAMCE MIC MIX MIC
0 10 L R SOURCE MIC
BC
RESET
COUNTER
A/B MODE
REC(LINE IN)
HIGH NORM M RELAY P
T SIZE MEMORY B/C/OFF
feeder
CD SYN MPX MIN SEC
REC REC
L
R PLAY REVERSE
dB -00 -20 -10 -6 -3 0 +3 +6
R
PLAY(LINE OUT)
NORMAL HIGH
0 10 L R SOURCE MIC
CD player
MULTIPLE COMPACT DISC PLAYER CDC-5080R
OPEN/CLOSE
V-CD PBC REVERT PROG AUTO RANDOM REPEAT ALL 1 DISC S 1 2 3
GRAPHICS PEAK DELETE EDIT SCENE TRACK A< >B MPX INTRO 4 5 6
POWER A B INDEX STEP
7 8 9
ON/OFF
1 2 3 4 5 10 11 12
FM
13 14 15
PHONES LEVEL
PHONES
75Ω
SUPPLIED ADAPTOR
CD
PLAY
TAPE MON.
VIDEO
MON.
OUT AUX
IN
VCR1
OUT
VIDEO L R
FRONT
6-CH V-CD
GRAPHICS
PBC REVERT
PEAK
PROG
DELETE
AUTO
EDIT SCENE TRACK
RANDOM REPEAT ALL 1 DISC S
A< >B MPX INTRO
1
4
2
5
3
6
6 CH decoder
A B INDEX STEP
7 8 9
OPEN/CLOSE 1 2 3 4 5 10 11 12
13 14 15
MIN MAX
PHONES
INPUT
PLAY(OUT) PLAY(OUT)
DVD player or additional video component
SUB
CENTER MULTIPLE COMPACT DISC PLAYER CDC-5080R
OUT
L R
Monitor TV
VIDEO IN
CENTER CH OUT
SUBWOOFER CH OUT
● Use these jacks to connect the corresponding analog ● The TAPE MONITOR PLAY/REC jacks may also be
outputs of 6 CH decoder or DVD player with 6 CH connected to the LINE OUT/IN jacks of an optional graphic
output for Dolby Digital or DTS, etc. equalizer.
(For details, see the operator's manual of the component ● The DVD/TV jacks may also be connected to an additional
5
■ PRE OUT connections
ENGLISH
L R
FRONT
Power amplifier ■ CONNECTING SYSTEM CONTROL
PRE
REAR
Front speakers Sherwood component
OUT
with DIGI LINK II or III
SUB CENTER
WOOFER
CD player
Power amplifier
System
Rear speakers Tape deck control
cord
Power amplifier
Graphic equalizer
Center speaker DIGI-LINK
E85649
■ SWITCHED AC OUTLET
29Z3
LISTED
AC INPUT AUDIO EQUIPMENT
120V~60Hz
COAXIAL 1 3.5A R
C R
CD
AM
LOOP
L R
FRONT PLAY
FRONT
SPEAKERS
(8Ω)
MODEL NO. RVD-8090R
AUDIO/VIDEO RECEIVER
MADE IN KOREA
DESIGNED IN USA
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and
(2)this device must accept any interference received,
● This outlet is switched on(power on mode) and
including interference that may cause undesired operation.
VIDEO L R
DIGI-LINK
CENTER SPEAKER(8Ω) SWITCHED
120V~60Hz
100W 1A MAX
All Rights Reserved.
Power on mode – switched AC outlet on
■ CONNECTING SPEAKERS
■ CONNECTING DIGITAL INPUTS
Front right Front left
COAXIAL 1
Component with
COAXIAL DIGITAL OUT
FRONT
SPEAKERS
Component with (8Ω)
6
Front Panel Controls
BAND BUTTON
FM MODE BUTTON
DYNAMIC RANGE BUTTON/INDICATOR
ENGLISH
CINEMA EQ BUTTON/INDICATOR
DTS INDICATOR
TONE DIRECT INDICATOR MEMORY/ENTER BUTTON
STANDBY BUTTON/
INDICATOR DOLBY DIGITAL SPEAKER MODE BUTTON
POWER SWTICH REMOTE SENSOR INDICATOR
T D A S
AUDIO/VIDEO RECEIVER RVD-8090R T0TALLY DISCRETE AMPLIFIER STAGE
STANDBY
MASTER VOLUME
TAPE
SPEAKER
MONITOR
VIDEO
VIDEO L AUDIO R
VIDEO L AUDIO R
RDS RT TIMER 12 ST TUNED AUTO VCR12V-CD TAPE M PRESET
MEM
dB
kHz
Additional video component
MHz OUT OUT
ms
EON TP TA PTY Pro Logic THEATER HALL SLEEP
7
Speaker Placement
ENGLISH
To obtain the best surround sound effect in your home, place the speakers as
follows;
Front speakers: Place each front speaker about 1m (40″ ) from the TV set.
Center speaker: Place the center speaker either above or below the TV set to
assure good visualization of center channel program.
Rear speakers: Place the rear speakers approximately 1m above the ear level
of a seated listener on the direct left and right of them or
slightly behind.
Subwoofer: Reproduces powerful deep bass sounds. Place a powered
subwoofer anywhere in the front as desired.
The ideal surround system needs all the speakers listed above. REAR REAR
LEFT
To accurately reproduce DTS digital surround, center and rear speakers as RIGHT
Modes DTS Dolby Digital(AC-3) Dolby Pro Logic Other Surround Stereo 6 CH DIRECT
Speakers
Front Yes Yes Yes Yes Yes Yes
Center Yes Yes Yes Optional - Yes
Rear Yes Yes Yes Yes - Yes
Subwoofer Yes Yes Optional Optional Optional Yes
Note:To avoid interference with the TV picture, use only magnetically shielded center and front speakers.
8
DIGI LINK III System Remote Controls
This receiver and other compatible Sherwood components can be operated via remote control.
Compatible Sherwood components bear the DIGI LINK II or III logo.
ENGLISH
To enable the DIGI LINK control system, you must first interconnect the green(Digi Link) jacks on each Sherwood
component using standard RCA cables. (See page 6 for details)
ENTER BUTTON
PRESET SCAN BUTTON
NUMERIC(1~0)/CURSOR CONTROL
ON SCREEN DISPLAY BUTTON ( , , , ) BUTTONS
POWER OSD ENTER P.SCAN For selecting preset stations in tuner mode.
POWER BUTTON For selecting a track or a disc in CD mode.
When selecting a disc, select disc No.(1~5) within 2
1 2 3 4 5 sec. after pressing the DISC button.
■ CD PLAYER SECTION 6 7 8 9 0
For selecting the menus or changing the conditions
of the items with the CURSOR CONTROL buttons
DISC(CD changer only)-for disc selection in the ON SCREEN DISPLAY mode.
- to begin play. DISC
With the Sherwood Digi Link III system, pressing a transport control key such as PLAY, on a Sherwood CD player or tape
deck will automatically engage that input on the receiver and then PLAY will start.
Notes:
Some functions for CD players, tape decks or equalizer may not be operable from the remote control.
For details about functions, refer to the operating instructions of each component.
9
REMOTE CONTROL OPERATION RANGE
ENGLISH
T D A S
AUDIO/VIDEO RECEIVER RVD-8090R T0TALLY DISCRETE AMPLIFIER STAGE
STANDBY
MASTER VOLUME
TAPE
SPEAKER MONITOR
VIDEO
VIDEO L AUDIO R
7m
30 30
POWER P.SCAN
The operating range of the remote control is about
1
6
2
7
3
8
4
9
5
0
23 feet(7 Meters) and it will operate at angles of up
DISC
CD
CD
AUX
TUNER
TAPE MON.
REPEAT
A
A
B
DECK SEL.
INTRO
SCAN
VCR1 VCR2
6 CH DIRECT
EQ DECK
PRESET USER FILE DISPLAY T.MON
DSP STEREO
MODE
CHANNEL T.TONE D.TIME ADJUST
SEL.
CHANNEL LEVEL MASTER VOLUME
LOADING BATTERIES
2×1.5V
R 6/ SUM-3 / AA
10
Operations
ADJUSTING SPEAKER SETTINGS
ENGLISH
SPEAKER MODE
MEMO/ENTER
MEMO/ENTER
11
Adjust the level of the selected
Adjusting each channel level
6
ENGLISH
POWER P.SCAN
1 2 3 4 5
6 7 8 9 0
DISC
CD REPEAT INTRO
A B SCAN
CD TUNER DECK SEL
A B
AUX TAPE MON.
POWER P.SCAN
DVD/TV
VCR1 VCR2
1 2 3 4 5
6 7 8 9 0
CHANNEL LEVEL EQ
6 CH DIRECT
DECK
PRESET USER FILE DISPLAY T.MON
DISC
CD REPEAT INTRO
A B SCAN DSP STEREO
MODE
CD TUNER DECK SEL
A B CHANNEL T.TONE D.TIME ADJUST
AUX TAPE MON. SEL
or
CHANNEL LEVEL MASTER VOLUME
CH SELECTOR DVD/TV
VCR1 VCR2
CHANNEL LEVEL DISPLAY
SYS
SLEEP MUTE
6 CH DIRECT
CHANNEL EQ DECK
or
PRESET USER FILE DISPLAY T.MON
SEL. CHANNEL
SEL
T.TONE
CHANNEL LEVEL
D.TIME
MASTER VOLUME
ADJUST
11
POWER P.SCAN
DISC
CD
2
7
3
REPEAT
4
9
5
INTRO
the Test Tone button on the remote control.
A B SCAN
CD TUNER DECK SEL
A B
AUX TAPE MON.
DVD/TV
VCR1 VCR2
6 CH DIRECT
EQ DECK
PRESET USER FILE DISPLAY T.MON
DSP STEREO
MODE
CHANNEL T.TONE D.TIME ADJUST
T.TONE SEL
CHANNEL LEVEL MASTER VOLUME
POWER P.SCAN
1 2 3 4 5
6 7 8 9 0
DISC
CD REPEAT INTRO
A B SCAN
CD TUNER DECK SEL
A B
AUX TAPE MON.
DVD/TV
6 CH DIRECT
EQ DECK
PRESET USER FILE DISPLAY T.MON
DSP STEREO
MODE
T.TONE SEL
CHANNEL LEVEL MASTER VOLUME
12
ADJUSTING DELAY TIMES
12
POWER P.SCAN
ENGLISH
6 7 8 9 0
CD TUNER
REPEAT
A
A
B
DECK SEL
INTRO
SCAN
DVD/TV
VCR1 VCR2
D.TIME
control.
DSP STEREO
MODE
CHANNEL T.TONE D.TIME ADJUST
SEL
CHANNEL LEVEL MASTER VOLUME
Your receiver allows you to optimize the arrival time of REMOTE CONTROL RM-RVD-98LM
the sound from your speakers. This can help focus the
audio image and add enjoyment to your home theater The current delay time will be displayed for 5 seconds.
experience. In the Dolby Digital mode, only, the center delay is
Measure the distance from the prime listening position
adjustable and the corresponding delay time is displayed.
to each of the speakers to the nearest foot.
-In the Dolby Digital mode, the optimum performance When playing Dolby Digital program sources in the
of your system occurs when the sound from all five Theater, Hall 1 or Hall 2 modes, the center and rear
speakers arrives at your primary listening position at delay is adjustable just as it is in the Dolby Digital Mode.
the same time. If all speakers are equidistant from the
main listening position, set the following delay. Adjust the delay
Center delay time : 0 mS, Rear delay time : 0 mS
13
POWER P.SCAN
time. 1
6
2
7
3
8
4
9
5
DVD/TV
6 CH DIRECT
EQ DECK
PRESET USER FILE DISPLAY T.MON
DSP
MODE
STEREO
ADJUST
CHANNEL T.TONE D.TIME ADJUST
each foot of difference. The maximum is 5 mS. the delay time changes in regular
REMOTE CONTROL RM-RVD-98LM
14
POWER P.SCAN
DISC
CD
2
7
3
REPEAT
A B
4
9
5
INTRO
SCAN
DVD/TV
VCR1 VCR2
6 CH DIRECT
EQ DECK
DSP
MODE
STEREO
D.TIME
CHANNEL T.TONE D.TIME ADJUST
SEL
CHANNEL LEVEL MASTER VOLUME
your primary listening position as your main left and For center delay in the Dolby Digital
DISPLAY
SYS
SLEEP
6
2
7
3
8
4
9
P.SCAN
0
DTS and Dolby Digital multi-channel program
STEREO
DISC
CD
CD
AUX
DVD/TV
TUNER
TAPE MON.
REPEAT
A
A
B
DECK SEL
INTRO
SCAN
B
material will be heard automatically in the 2-CH
VCR1
EQ
PRESET USER
VCR2
6 CH DIRECT
FILE DISPLAY
DECK
T.MON
STEREO downmix mode if headphones are plugged in and
or DSP
MODE
STEREO
CHANNEL
SEL
T.TONE
CHANNEL LEVEL
DISPLAY
SYS
SLEEP
D.TIME
MASTER VOLUME
MUTE
ADJUST
13
LISTENING TO A PROGRAM SOURCE
3
ENGLISH
1 2 3 4 5
6 7 8 9 0
DISC
AUDIO CD REPEAT
A B
INTRO
SCAN
CD TUNER DECK SEL
A B
DVD/TV
TAPE MON.
6 CH DIRECT
EQ DECK
PRESET USER FILE DISPLAY T.MON
or
CHANNEL T.TONE D.TIME ADJUST
SEL
CHANNEL LEVEL MASTER VOLUME
DVD/TV
SYS
In the standby mode, turn the power on. When the TAPE MONITOR button is set to on, the
“TAPE M” indicator lights up and the source connected
1 to the TAPE MONITOR input can be heard. To listen
to a source other than the one connected to the TAPE
STANDBY
POWER
POWER P.SCAN
MONITOR, be sure the TAPE MONITOR is set to off.
TAPE MONITOR function
1 2 3 4 5
6 7 8 9 0
DISC
CD REPEAT INTRO
A B SCAN
CD TUNER DECK SEL
A B
DVD/TV
VCR1 VCR2
6 CH DIRECT
or
EQ DECK
PRESET USER FILE DISPLAY T.MON
CHANNEL
SEL
DSP
MODE
T.TONE
CHANNEL LEVEL
STEREO
D.TIME
MASTER VOLUME
ADJUST
to the receiver’s TAPE MONITOR jacks. To listen to the
DISPLAY SLEEP MUTE
SYS
POWER P.SCAN
1 2 3 4 5
6 CHANNEL 6 7 8 9 0
CD TUNER
REPEAT
A
A
B
DECK SEL
INTRO
SCAN
2
AUX TAPE MON.
6 CH DIRECT DVD/TV
VCR1 VCR2
6 CH DIRECT
EQ DECK
or
PRESET USER FILE DISPLAY T.MON
DSP STEREO
MODE
CHANNEL T.TONE D.TIME ADJUST
SEL
CHANNEL LEVEL MASTER VOLUME
14
When CD, VCR2 or DVD is selected Adjust the (overall) volume.
as input source 6
ENGLISH
Select the digital or the analog input
4 connected as desired.
DIGITAL
MASTER VOLUME POWER
DISC
CD
CD
AUX
DVD/TV
2
TUNER
TAPE MON.
3
REPEAT
A
A
B
4
9
P.SCAN
DECK SEL
5
INTRO
SCAN
INPUTS
or
VCR1 VCR2
6 CH DIRECT
EQ DECK
PRESET USER FILE DISPLAY T.MON
DSP STEREO
CHANNEL
SEL
MODE
T.TONE D.TIME ADJUST MASTER VOLUME
CHANNEL LEVEL MASTER VOLUME
DOWN
REMOTE CONTROL RM-RVD-98LM
UP
Operate the selected component for To listen to a program source without the
5 playback.
8 tone effect.
DIRECT
When playing back the program sources with The TONE DIRECT indicator lights up and the
surround sound, refer to “ENJOYING sound bypasses the tone circuitry.
SURROUND SOUND” on page 18. To cancel the tone direct function, press this button
again.
15
To compensate for edgy or shrill movie To mute the sound.
9 sound tracks.
10
ENGLISH
CINEMA EQ
POWER P.SCAN
1 2 3 4 5
6 7 8 9 0
DISC
CD REPEAT INTRO
A B SCAN
CD TUNER DECK SEL
A B
AUX TAPE MON.
DVD/TV
VCR1 VCR2
6 CH DIRECT
EQ DECK
PRESET USER FILE DISPLAY T.MON
DSP STEREO
MODE
CHANNEL
SEL
T.TONE
CHANNEL LEVEL
D.TIME
MASTER VOLUME
ADJUST
MUTE
DISPLAY SLEEP MUTE
SYS
16
SURROUND SOUND
This unit incorporates a sophisticated Digital Signal Processor that allows you to create optimum sound quality
and sound atmosphere in your personal Home Theater.
ENGLISH
Surround modes
This unit has 6 different surround modes to allow you to enjoy surround sound with various program
sources: DTS, DOLBY DIGITAL(AC-3), DOLBY PRO LOGIC, THEATER, HALL 1, HALL 2.
DTS (Digital Theater System) : Allows you to enjoy 5.1(or 6) discrete channels of high quality digital audio
from DTS program sources bearing the “ ”, “ HDS ” or
17
ENJOYING SURROUND SOUND
Surround sound will not work properly if the signal passes through a graphic equalizer.
Please refer to your equalizer operating instructions for guidance on switching off (or defeating) the equalizer.
ENGLISH
When selecting the Dolby Surround mode. When selecting a surround mode between
THEATER, HALL 1 and HALL 2 modes.
POWER P.SCAN
POWER P.SCAN
1 2 3 4 5
1 2 3 4 5
6 7 8 9 0
6 7 8 9 0
DISC
CD REPEAT INTRO
DSP DISC
CD REPEAT INTRO
A B SCAN A B SCAN
CD
AUX
TUNER
TAPE MON.
A
DECK SEL
B MODE CD TUNER
A
DECK SEL
B
AUX TAPE MON.
DVD/TV DVD/TV
6 CH DIRECT 6 CH DIRECT
DECK EQ DECK
EQ
PRESET USER FILE DISPLAY T.MON
or
PRESET USER FILE DISPLAY T.MON
CHANNEL
SEL
DSP
MODE
T.TONE
CHANNEL LEVEL
STEREO
D.TIME
MASTER VOLUME
ADJUST
or DSP CHANNEL
SEL
CHANNEL LEVEL
DSP
MODE
T.TONE
STEREO
D.TIME
MASTER VOLUME
ADJUST
DISPLAY
SYS
SLEEP MUTE
MODE DISPLAY
SYS
SLEEP MUTE
When playing program sources bearing the “ ”, Each time the DSP MODE button is pressed, the
“ ” or “
DOLBY
D I G I T A L
DOLBY SURROUND
” trademark such as video, surround mode changes as follows;
DVD or LD software, the DTS, Dolby Digital (AC-3) or THEATER HALL 1 HALL 2
Dolby Pro Logic mode is automatically selected
according to the input signal. Playing the DTS or Dolby Surround program sources
When playing the Dolby Digital (AC-3) program sources (bearing the “ ”, “ ” or the
DOLBY
D I G I T A L
encoded into 2 channel format, either the Dolby Pro “ ” trademark) in THEATER, HALL 1
DOLBY SURROUND
Logic mode or the Dolby Digital (AC-3) mode is or HALL 2 mode will produce better surround effects.
automatically selected according to the encoding When the 6 CH DIRECT is selected as input source,
process. (If the Dolby Digital (AC-3) mode is the surround mode cannot be selected.
automatically selected, pressing the DTS/DOLBY
SURROUND button will select the Dolby Pro Logic
When canceling the surround mode for normal stereo
mode.)
operation.
To enjoy the DTS or Dolby Digital mode, be sure that
the program source and the corresponding digital input
are selected correctly. If not, no sound will be heard. POWER P.SCAN
1 2 3 4 5
6 7 8 9 0
DISC
STEREO CD REPEAT
A B
INTRO
SCAN
CD TUNER DECK SEL
A B
AUX TAPE MON.
DVD/TV
VCR1 VCR2
EQ
PRESET
6 CH DIRECT
CHANNEL LEVEL
STEREO
D.TIME
MASTER VOLUME
ADJUST
18
LISTENING TO RADIO BROADCASTS
ENGLISH
BAND
Select the tuner.
BAND FREQUENCY
1 2 3 4 5
6 7 8 9 0
TUNER DISC
CD REPEAT INTRO
AUDIO CD TUNER
A B
DECK SEL
SCAN
A B
AUX TAPE MON.
DVD/TV
VCR1 VCR2
6 CH DIRECT
or
EQ DECK
PRESET USER FILE DISPLAY T.MON
CHANNEL
SEL
CHANNEL LEVEL
DISPLAY
DSP
MODE
T.TONE
SLEEP
STEREO
D.TIME
MASTER VOLUME
MUTE
ADJUST
MODE
TUNING/PRESET
Each time this button is pressed, the mode changes Then “AUTO” appears on the display. The tuner
as follows; will now search until a station of sufficient
strength has been found. The display shows the
Tuning mode : “PRESET” goes off. tuned frequency and “TUNED”.
Preset mode : “PRESET” lights up. If the station found is not the desired one, simply
repeat this operation.
Weak stations are skipped during auto tuning.
Manual tuning
memory.
Tune in the desired station with auto or
1 manual tuning.
19
Select the desired preset number (1~30) and Repeat the above steps 1 to 3 to memorize
TUNING/PRESET
For “3”: 3
within 2 seconds
For “15”: 1 5
6 7 8 9 0
DISC
CD REPEAT INTRO
A B SCAN
CD TUNER DECK SEL
DVD/TV
VCR1 VCR2
6 CH DIRECT
EQ DECK
DSP STEREO
MODE
CHANNEL T.TONE D.TIME ADJUST
SEL
CHANNEL LEVEL MASTER VOLUME
20
RECORDING
The analog signals from the 6 CH DIRECT inputs and the digital signals from the coaxial or optical digital input
can be heard but cannot be recorded.
ENGLISH
The volume and tone (bass, treble) settings, etc. have no effect on the recording signals.
Select the desired input as a recording source 2 connected to the TAPE MONITOR.
POWER P.SCAN
1 2 3 4 5
6 7 8 9 0
CD TUNER
DISC
CD
CD TUNER
REPEAT
A
A
B
DECK SEL
INTRO
SCAN
B
Start play on the desired input.
3
INPUT SELECTOR AUX TAPE MON.
DVD/TV
VCR1 VCR2
6 CH DIRECT
EQ DECK
PRESET USER FILE DISPLAY T.MON
or DVD/TV
DISPLAY
SYS
SLEEP MUTE
VCR1 VCR2
1 source.
VIDEO
DVD/TV
POWER
DISC
CD
CD
AUX
DVD/TV
VCR1
EQ
PRESET USER
2
TUNER
TAPE MON.
VCR2
6 CH DIRECT
3
FILE
REPEAT
A
A
B
DISPLAY
4
9
P.SCAN
DECK SEL
5
INTRO
SCAN
DECK
T.MON
3
VCR2
or
DSP STEREO
MODE
CHANNEL T.TONE D.TIME ADJUST
SEL
CHANNEL LEVEL
DISPLAY
SYS
SLEEP MUTE
MASTER VOLUME
Dubbing the audio and video signals Select CD as an audio recording source.
separately onto VCR 1
Example) When dubbing the DVD video signal and
2
the CD audio signal separately onto VCR 1.
Select DVD as a video recording source.
1
INPUT SELECTOR
POWER P.SCAN
1 2 3 4 5
6 7 8 9 0
DISC
AUDIO CD CD
CD TUNER
REPEAT
A B
DECK SEL
INTRO
SCAN
A B
AUX TAPE MON.
DVD/TV
VCR1 VCR2
POWER P.SCAN
or EQ
PRESET
CHANNEL
6 CH DIRECT
USER
DSP
MODE
T.TONE
FILE DISPLAY
STEREO
D.TIME
DECK
T.MON
ADJUST
SEL
1 2 3 4 5 CHANNEL LEVEL MASTER VOLUME
6 7 8 9 0
DISPLAY SLEEP MUTE
DISC SYS
VIDEO CD REPEAT
A B
INTRO
SCAN
CD TUNER DECK SEL
DVD/TV AUX
DVD/TV
TAPE MON.
A B
REMOTE CONTROL RM-RVD-98L
VCR1 VCR2
6 CH DIRECT
EQ DECK
PRESET USER FILE DISPLAY T.MON
or
DSP STEREO
MODE
CHANNEL T.TONE D.TIME ADJUST
SEL
CHANNEL LEVEL MASTER VOLUME
21
Start recording on the VCR 1. Start play on the DVD and the CD
4
ENGLISH
3 respectively.
OTHER FUNCTIONS
1 2 3 4
P.SCAN
6 7 8 9 0
CD
AUX
TUNER
TAPE MON.
REPEAT
A
A
B
DECK SEL
INTRO
SCAN
DVD/TV
VCR1 VCR2
6 CH DIRECT
EQ DECK
PRESET USER FILE DISPLAY T.MON
DSP STEREO
MODE
POWER P.SCAN
DISPLAY CHANNEL
SEL
T.TONE
CHANNEL LEVEL
D.TIME
MASTER VOLUME
ADJUST
6 7 8 9 0 SYS SYS
DISC
CD REPEAT INTRO
A B SCAN REMOTE CONTROL RM-RVD-98LM
CD TUNER DECK SEL
A B
AUX TAPE MON.
DVD/TV
VCR1 VCR2
6 CH DIRECT
EQ DECK
PRESET USER FILE DISPLAY T.MON
DSP STEREO
MODE
SLEEP CHANNEL
SEL
T.TONE
CHANNEL LEVEL
D.TIME
MASTER VOLUME
ADJUST
22
Troubleshooting Guide
If a fault occurs, run through the table below before taking your receiver for repair.
If the fault persists, attempt to solve it by switching the receiver off and on again. If this fails to resolve the situation, consult
your dealer. Under no circumstances should you attempt to repair the receiver yourself as this could invalidate the warranty.
ENGLISH
PROBLEM POSSIBLE CAUSE REMEDY
No power • The AC input cord is disconnected. • Connect the cord securely.
• Poor connection at AC wall outlet or the • Check the outlet using a lamp or another
outlet is inactive. appliance.
No sound • The speaker wires are disconnected. • Check the speaker connections.
• The master volume is adjusted too low. • Adjust the master volume.
• The MUTE button on the remote control • Press the MUTE button to cancel the
is pressed to ON. muting effect.
• Speakers are not switched on. • Press the SPEAKER button to ON.
• Incorrect selection of the input source. • Select the desired input source correctly.
• Incorrect connections between the • Make connections correctly.
components.
No sound from the rear • Surround mode is switched off(normal • Select a surround mode.
speakers stereo mode).
• Master volume and rear level are too • Adjust master volume and rear level.
low.
• A monaural source is used. • Select a stereo or surround source.
• Rear speaker setting is “N”. • Select the desired rear speaker setting.
No sound from the center • Surround mode is switched off(normal • Select the desired surround.
speaker stereo mode).
• Center speaker setting is “N”. • Select the desired center speaker setting.
• Master volume and center level are too • Adjust master volume and center level.
low.
Preset stations cannot be • An incorrect station frequency has been • Memorize the correct station frequency.
received memorized.
• The memorized stations are cleared. • Memorize the stations again.
Continuous hissing noise • Weak signals. • Change the position of the antenna.
during FM reception, • Install an outdoor antenna.
especially when a stereo
broadcast is received.
Continuous or intermittent • Noise is caused by motors, fluorescent • Keep the receiver away from noise
hissing noise during AM lamps or lightning, etc. sources.
reception, especially at night. • Install an outdoor AM antenna.
Remote control unit does • Batteries are not loaded or exhausted. • Replace the batteries.
not operate. • The remote sensor is obstructed. • Remove the obstacle.
Other system components • DIGI LINK connections are not made • Make proper DIGI LINK connections.
do not react to remote properly.
control commands.
23
Specifications
AMPLIFIER SECTION
Power output, stereo mode, 8 Ω, THD 0.2%, 40 Hz~20 kHz ................................................................................. 2 ×100 W
ENGLISH
FM TUNER SECTION
Tuning frequency range .................................................................................................................................... 87.5~108 MHz
Usable sensitivity, THD 3%, S/N 30 dB .................................................................................................................... 13.2 dBf
50 dB quieting sensitivity, mono/stereo ............................................................................................................. 17.2/32.2 dBf
Signal to noise ratio, 65 dBf, mono/stereo ................................................................................................................. 70/65 dB
Total harmonic distortion, 65 dBf,1 kHz, mono/stereo ............................................................................................. 0.3/0.5 %
Frequency response, 30 Hz~15 kHz .......................................................................................................................... ±1.5 dB
Stereo separation, 1 kHz ................................................................................................................................................. 45 dB
Capture ratio ................................................................................................................................................................. 1.25 dB
IF rejection ratio ............................................................................................................................................................ 120 dB
AM TUNER SECTION
Tuning frequency range .................................................................................................................................... 520~1710 kHz
Usable sensitivity ...................................................................................................................................................... 500 μV/m
Signal to noise ratio, 80 dB/m ......................................................................................................................................... 45 dB
Selectivity ........................................................................................................................................................................ 30 dB
GENERAL
Power supply ................................................................................................................................................ AC 120 V, 60 Hz
Power consumption .......................................................................................................................................................... 3.5 A
Switched AC outlet ......................................................................................................................... TOTAL 1 A, 100 W max.
Dimensions (W×H×D) ............................................................................ 440×140×380 mm(17-3/8×5-1/2×15 inches)
Weight (Net) ..................................................................................................................................................... 12 kg(26.5 lbs)
Note: Design and specifications are subject to change without notice for improvements.
24
O P E R A T I N G I N S T R U C T I O N S
RVD-8090R
AUDIO/VIDEO RECEIVER
5707-04705-003-0