Professional Documents
Culture Documents
5. Activation Completed............................................ p. 7
© Express Publishing 2
Welcome to the Express Publishing software. In order to use
this software you need to follow some simple steps.
This software requires activation. The activation process is a simple and short
procedure and requires that you have access to the Internet (see Fig 1).
Fig 1
Activation Validity
There are 3 activations available for the respective software. Once
activated for the first time, a one-year period commences, which means
that the other two activations that are available must be used within this
one-year period. However, once activated, the validity of the software is
for life (on the respective computer/computers).
3 © Express Publishing
If you don’t use the other two activations within the one-year period, you
will require the purchase of a new Course Book or CD/DVD (see Fig 2).
Fig 2
If you activate the software and during the one-year period you upgrade
your computer substantially or change your computer, then the software
deactivates automatically and you will need to activate again, thus using
the second activation that is available for the respective software.
If you have used all three activations and you wish to activate the software
a fourth time, you will need to purchase a new Course Book or CD/DVD
(see Fig 3).
Fig 3
© Express Publishing 4
If you type in an incorrect Serial Number, the application will advise you
of this and you will be requested to try again (see Fig 4).
Fig 4
Activation Requirements
In order to activate the software you require access to the Internet. If your
Firewall is activated, deactivate it temporarily prior to commencing the
activation process of the software (see Fig 5).
Fig 5
If you do not have Internet access on the computer on which you wish to
use the software, please follow the instructions provided in the following
section.
5 © Express Publishing
Activating the Software with the use of a USB stick
If you do not have Internet access on the computer on which you wish to
use this software, you will need to activate it on a computer that does
have Internet access, and then transfer the activation to the original
computer. This can be done with the use of a USB stick.
If any error messages are displayed during the activation process, refer
to pages 3-5 of this manual.
© Express Publishing 6
Activation Completed
Fig 8
You may now remove the USB stick from the computer and transfer the
USB stick to the original computer on which you wanted to activate this
software. Plug in the USB stick and run the ACT file again. The following
message will be displayed (see Fig 9).
Fig 9
You may now place the CD/DVD in your computer and run the software.
7 © Express Publishing
If you try to transfer the activation to another computer (and not to the
original computer), the following message will be displayed (see Fig 10).
Fig 10
1 If you have inserted the disk in your drive and the application opens
and closes automatically without showing any prompts, this means
that you do not have the minimum requirements (see cover page for
Minimum System Requirements).
2 If you provide your name and the correct serial number, but a prompt
appears which tells you that there is no Internet connection (and you
do have Internet connection), this means that the Internet connection
is via a proxy server and you need to change the settings to direct
connection.
© Express Publishing 8