Professional Documents
Culture Documents
General Specifications
• Available Construction Types: • Air Inlet and Exhaust System
Titan™ 250 Gas Turbine
– Duct In/Duct Out – Carbon Steel
• Industrial, Two-Shaft – Totally Enclosed Air-to-Air Cooled – Stainless Steel
• 16 Stage Axial Compressor – Totally Enclosed Water-to-Air Cooled – Coastal Type Filters
– Variable Inlet Guide Vanes • Sleeve Bearings • Enclosure
– Pressure Ratio: 24:1 – Driver Only
– Inlet Airflow: 73.2 kg/sec • Oil Jacking System
– Fire Detection and Suppression
(155.2 lb/sec) • NEMA Class F Insulation
• Turbotronic™ Control System
– Vertically Split Case • Class B Temperature Rise
– Onskid Control System
• Combustion Chamber Annular-Type • Voltages: 1100 to 13,800 VAC - Digital Onskid Display Panel
– 14 Lean-Premixed, Dry Low • Frequency: 50 or 60 Hz – 24 VDC Control Power
Emissions Injectors Package (120 VDC Input)
– Torch Ignitor System – Serial Link Supervisory Interface
• Mechanical Construction
• Gas Generator Turbine – Steel Base Frame with Drip Pans – Field Programmable
– 2-Stage Reaction – Vibration Monitoring
– 316L Stainless Steel Piping <8" dia. – Temperature Monitoring
– Max. Speed: 10,690 rpm
– Compression-Type Tube Fittings – Generator Control
• Power Turbine • Electrical System
– 3-Stage Reaction – Selectable Control Modes
– NEC, Class 1, Group D, Div 2 – Solid-State Voltage Regulation
– Max. Speed: 6500 rpm
– CENELEC/ATEX Zone 2 – Automatic Synchronization
• Bearings – Metering Panel with Manual
– Cable Tray Wiring
– 5 Radial Journal, Tilt-Pad – 120 VDC Battery/Charger System Synchronization*
– 2 Active Thrust, Tilt-Pad – KW Control*
– 2 Inactive Thrust, Fixed Tapered • Direct-Drive AC Start System
– Heat Recovery Application Interface
Land • Fuel System – Multiple Operator Display Screens
• Coatings – Dry Low Emission (SoLoNOx™) – Data Collection and Playback
– Compressor: Inorganic Aluminum – Conventional – Turbine Performance Map*
– Turbine and Nozzle Blades: • Fuel Types – InSight Platform™ Equipment Health
Precious Metal Diffusion Aluminide – Natural Gas or Dual (Gas/Distillate) Management*
• Vibration Transducer Type • Integrated Lube Oil System – Printer/Logger*
– Proximity Probes , 2 per Radial – Turbine-Driven Main Pump • Documentation
Bearing/2 per Thrust Bearing – AC Motor-Driven Pre/Post Pump – Electrical Drawings
– DC (120 V) Motor-Driven – Mechanical Drawings
Main Reduction Drive Backup Pump – Quality Control Data Book
• Epicyclic Type – Oil Cooler and Oil Heater* – Inspection and Test Plan
– 1500 rpm (50 Hz) or 1800 rpm (60 Hz) – Tank Vent Separator and Flame Trap – Test Reports
– Accessory Power Take-Off – Lube Oil Filter – O&M Manuals
Generator • Turbine Compressor Cleaning System • Factory Testing of Turbine
• Salient Pole, 3 Phase, 6 Wire, Wye – On-Crank/On-Line • Factory Testing of Package
Connected, Synchronous, with – Portable Cleaning Tank* – Non-Dynamic
Permanent Magnet Generator Exciter – Dynamic
* Option
TITAN 250
Gas Turbine Generator Set
Power Generation
18.2 m 3.7 m
(59’ 6”) (12’ 0”)
3.4 m GENERATOR
(11’ 1”) MAINTENANCE