Professional Documents
Culture Documents
Noted:Of course it is sure your cicso phone is with sip protocol ,then it can register to
our device,anyway you need disable your local DHCP server,just only use zycoo
DHCP server when you config it .
Telphony>Extensions>Phone Provision
then activate
In the end,reboot your cisco phone ,and it will get ip,then auto config usually.
If it fails to get config on the cisco phone ,you can try to enable the packet capture
(Maintenance>diagnostic>Ethernet Capture) wan or lan that you have connected
on the zycoo device,then reboot phone again ,then you can share us the packet.
Support department
20200519