Professional Documents
Culture Documents
com/)
Android 10 (https://www.getdroidtips.com/aosp-android-10-custom-rom/)
iOS 14 (https://www.getdroidtips.com/install-ios-14-iphone/)
If you have an Android TV Box and you want to upgrade its firmware then you have to
make use of a flash tool called Amlogic USB Burning tool. Along with the upgrading,
this USB Burning tool comes with all the keys to fix “Get Key Failed” errors. This tool will
exclusively work on any Windows PC. It will update Amlogic based Android TV boxes that
have .img firmware.
In this post, we bring you the Amlogic USB Burning tool and also tell you how you can
update the firmware of the Android TV Box. You can find the download link and
installation guide below. Usually, Android TV boxes have firmware files with .img
extensions. It’s quite different than other firmware files that have multiple files.
Table of Contents
3.1 How To Flash/Upgrade Firmware on Android TV Box Using Amlogiv USB Burning Tool
Like Android smartphones, there is a wave of several other Android products in the recent
past that has connected us more with the technology and made it more streamlined. And
being an Android device, these Android smart products are often treated with firmware
updates that are meant to increase the overall facility or functions of the device. Although,
these updates are not very frequent and only a few of the companies are able to push out
more updates for their Android devices. However, the updates are being sent over the
OTA, but often these are not the case as we are stuck with a .img file of the update which
we have to manually update.
Here comes into picture the Amlogic USB burning tool. However, you should note that this
tool is only for the Amlogic devices so, it is advised to check whether your device is
Amlogic based device or not. Amlogic USB Burning tool is a small firmware upgrading tool
meant for the Microsoft Windows platform, via which you can flash firmware to any
Amlogic based device or Amlogic powered chipset. So, you can simply make use of the
Amlogic USB burning tool to upgrade the Amlogic-powered device to a new firmware.
Advertisements
Pre-Requisites
Step-1 Download the Amlogic USB tool zip file and extract it to the PC.
Step-2 In the folder you have the InstallDriver.exe. This will install the required drivers for
Amlogic TV boxes.
Step-3 First, connect your device to the PC then click the Driver Installation wizard.
Step-5 Once the setup wizard opens click yes to all the options.
Step-6 Click the second option on the top bar to reveal the option for changing the
language.
Step-7 you have to put your device into recovery mode. This is differently done on all TV
boxes. Some have little reset holes and some have buttons on the bottom of your device.
Step-8 connect your Android TV box to your PC when it’s in recovery mode in order to
upgrade your firmware. If done correctly you will have a connect success like in the image
below.
Step-9 Now, click on the File option and browse to find your firmware .img file.
Step-10 Make sure to untick the overwrite key box
Step-11 Click Start to begin the firmware upgrade process.
Step-12 Wait for a while the firmware upgradation is taking place. After it finishes click on
Stop.
So, that’s it, guys. Now the firmware on your Android TV Box is updated. We hope this
guide about Amlogic USB Burning tool was helpful to you. if you have any queries do let
us know in the comments.