You are on page 1of 6

BARTOLITO  

the  ROOSTER  
AMIGURUMI  
design  by  Elisa’s  Crochet  

 
 
 
 
 
 
 
 
The  pattern    and  photographs  contained  in  this  document  are  property  of  Elisa’s  Crochet.  
This  pattern  is  available  for  personal  use  only.    
No  authorized  reproduction,  in  whole  or  in  part,  or  distribution  of  this  pattern  or  content  is  allowed.  
If  you  need  any  help  with  my  patterns,  you  may  contact  me:  elisascrochet@gmail.com  

 
 
   
 
 
 
1
SKILL  LEVEL:  Beginner,  Intermediate  
YARN:  -­‐Worsted  Medium  Yarn  (Lace  4)  in  Rust,  White,  Yellow,  Red,  Brown  (”I  love  this  cotton”  yarn)  
                         -­‐  Classic  Cotton  Thread  (Lace  0)  in  Black    
OTHER  MATERIALS:  -­‐Polyester  Fiber  Filling  
                                                                                 -­‐  9  mm  blue  plastic  safety  eyes  
HOOK  SIZES:  E/3.5  mm  
STITCHES  USED  and  ABBREVIATIONS:  magic  ring  (mr),  chain  (ch),  slip  stitch  (sl  st),  single  crochet  
(sc),  half  double  crochet  (hdc),  double  crochet  (dc),  decrease  (dec),  increase  (inc),  fasten  off  (F/O).  
 
INSTRUCTION:  work  in  rows  (ch  1  and  join  at  the  end  of  each  round),  otherwise  instructed  
 
HEAD:  (rust  and  white  yarn)  
1)  (starting  off  with  rust  yarn)  6  sc  in  a  mr  (6)  
2)  inc  around  (12)  
3)  *1  sc,  inc*,  repeat  **  around  (18)  
4)  *2  sc,  inc*,  repeat  **  around  (24)  
5)  *3  sc,  inc*,  repeat  **  around  (30)  
6-­‐20)  sc  even  (30)    
21)  working  in  fl  only,  1  hdc,  1  hdc,  ch  1  and  sl  st  in  the  same  st,  sl  st  in  the  next  one,  *1  hdc,  1hdc  and  
ch1,  sl  st  in  the  same  st,  sl  st  in  the  next  one*,  repeat  **  9  times.    
22)  switch  to  white  yarn,  working  in  the  bl  of  the  previous  round,  *4  sc,  inc*,  repeat  **  around  (36)  
23)  working  in  fl  only,  *5  sc,  inc*,  repeat  **  around  (42);  F/O  and  leave  a  long  tail  of  yarn  to  sew  the  
head  to  the  lower  body.  Stuff  the  head  firmly.    
 
EYE  (white  and  red  yarn,  9  mm  blue  plastic  safety  eye;  make  two)  
1)  (starting  off  with  white  yarn)  6  sc  in  a  mr  (6)  
2)  inc  around  (12)  
3)  sc  even  (12)  
4)  switch  to  red  yarn,  1  sc,  5  inc,  1  sc,  join  to  the  next  st  with  a  sl  st  (13);  F/O  and  leave  a  long  tail  of  
yarn  for  sewing  the  eye  to  the  head.  
Insert  the  plastic  safety  eye  in  the  center  of  the  white  eye,  sew  the  crocheted  eye  on  the  head  and  stuff  
moderately  while  sewing  it.  Refer  to  the  pictures  for  assembling  the  doll.  
 
EYELID  (red  yarn;  make  two)  
1)  6  sc  in  a  mr,  do  not  join  (6);  ch1  and  turn  
2)  inc,  4  sc,  inc  (8),  ch1  and  turn  
3)  8  sc  (8);  F/O  and  leave  a  long  tail  of  yarn  for  sewing  the  eyelid  to  the  head.    
Refer  to  the  pictures  for  assembling  the  pieces  together.  
 
 
 
 
 
 

2
BEAK  AND  WATTLES  (yellow  and  red  yarn  and  black  cotton  thread)  
1)  starting  off  with  yellow,  6  sc  in  a  mr  (6)  
2)  *2  sc,  inc*,  repeat  **  twice  (8)  
3)  *3  sc,  inc*,  repeat  **  twice  (10)  
4)  sc  even  (10)  
5)  *4  sc,  inc*,  repeat  **  twice  (12)  
6)  *5  sc,  inc*,  repeat  **  twice  (14)  
7)  1  sc  inc,  2  sc,  1  hdc,  ch1,  1  hdc,  2  sc,  1  sc  inc,  6  sc  (16)  
8)  switch  to  red  yarn,  3  sc,  2  dc  (skip  the  ch  of  the  previous  rnd),  11  sc  (16)  
9)  1  sl  st,  1  sl  st,  ch  1  and  2  hdc  in  the  same  st,  1  hdc  inc  (4),  ch1  and  turn    
10)  4  hdc  (4),  ch  1  and  turn  
11)  2  sc  dec  (2),  and  keep  sc  on  the  side  until  you  reach  the  last  red  round  of  the  beak,  1  sl  st,  1  sl  st  
and  2  hdc  in  the  same  st,  1  hdc  inc  in  the  next  one,  ch  1  and  turn    
12)  4  hdc  (4),  ch  1  and  turn  
13)  2  sc  dec  (2),  and  keep  sc  on  the  side  until  you  reach  the  last  red  round  of  the  beak,  1  sl  st;  F/O  and  
leave  a  long  tail  to  sew  the  beak  to  the  head.  
Embroider  the  black  line  on  the  beak  with  cotton  thread.  
 
COMB  (red  yarn)    
The  pictures  show  4  cylinders,    
but  you  should  make  a  5th  one  
Make  1  small:    
1)  4  sc  in  a  mr  (4)  
2)  *1  sc,  inc*,  repeat  **  twice  (6)  
3)  sc  even  (6)  
4)  *2  sc,  inc*,  repeat  **  twice  (8);  start  stuffing    
5)  *3  sc,  inc*,  repeat  **  twice  (10);  F/O  and  hide  the  yarn.    
Make  4  big:  
1)  4  sc  in  a  mr  (4)  
2)  *1  sc,  inc*,  repeat  **  twice  (6)  
3)  sc  even  (6)  
4)  *2  sc,  inc*,  repeat  **  twice  (8)  start  stuffing    
5)  *3  sc,  inc*,  repeat  **  twice  (10)  
6)  sc  even  (10);  F/O  an  hide  the  yarn  for  3  of  them.  Once  you  finish  working  on  the  fourth  do  not  cut  
the  yarn.  
Now  it’s  time  to  assemble  the  comb:  
1)  crochet  5  sc  from  the  #5,  5  sc  from  the  #4,  5  sc  from  the  #3,  5  sc  from  the  #2,  10  sc  from  the  #1,  5  
sc  from  the  #2,  5  sc  from  the  #3,  5  sc  from  the  #4,  5  sc  from  the  #5  (50)  
2)  sc  even  (50);  F/O  and  leave  a  long  tail  to  sew  the  comb  on  top  of  the  head.  Finish  stuffing  the  comb.  
 
LOWER  BODY    (white  yarn)  
1)  6  sc  in  a  magic  ring  (8)    
2)  inc  around  (16)  
3)  *1  sc,  inc*,  repeat  **  around  (24)  

3
4)  *2  sc,  inc*,  repeat  **  around  (32)  
5-­‐6)  sc  even  (32)  
7)  *3  sc,  inc*,  repeat  **  around  (40)  
8-­‐9)  sc  even  (40)  
10)  *4  sc,  inc*,  repeat  **  around  (48)  
11-­‐13)  sc  even  (48)  
14)  *2  sc,  dec*,  repeat  **  6  times,  24  sc  (42)  
15)  sc  even  (42)  
16)  *5  sc,  dec*,  repeat  **  around  (36)  
17-­‐18)  sc  even  (36);  start  stuffing  the  body  firmly  
19)  7  sc,  dec  repeat  **  around  (32)  
20)  *3  sc,  dec*,  repeat  **  4  times,  12  sc  (28)  
21)  *1  sc,  dec*,  repeat  **  6  times,  10  sc  (22)  
22)  *2  sc,  dec*,  repeat  **  5  times,  dec  (16);  finish  stuffing  the  body  
23)  dec  around  (8);  F/O  and  close  the  hole.  
Attach  the  head  to  the  lower  body  referring  to  the  pictures.  
 
THIGH    (yellow  and  brown  yarn;  make  two)  
1)  (starting  off  with  yellow  yarn)  8  sc  in  a  mr  (8)  
2)  *3  sc,  inc*,  repeat  **  twice  (10)  
3-­‐4)  sc  even  (10)  
5)  *3  sc,  dec*,  repeat  **  twice  (8)  
6-­‐7)  sc  even  (8)  
8)  switch  to  brown  yarn,  *3  sc,  inc*,  repeat  **  twice  (10)  
9)  *4  sc,  inc*,  repeat  **  twice  (12)  
10)  *5  sc,  inc*,  repeat  **  twice  (14)  
11)  *6  sc,  inc*,  repeat  **  twice  (16)  
12)  4  sc  dec,  8  sc  (12);  ch1  and  turn  
13)  8  sc  (8);  F/O  and  leave  a  long  tail  to  sew  the  thigh  to  the  lower  body.  Stuff  the  thigh  firmly.  
 
LONG  CLAW  (yellow  yarn;  make  6)  
1)  6  sc  in  a  mr  (6)  
2)  *2  sc,  inc*,  repeat  **  twice  (8)  
3-­‐7)  sc  even  (8);  F/O  and  leave  a  long  tail  to  attach  the  claw  to  the  thigh.  
Stuff  the  claw  firmly.  
 
SHORT  CLAW  (yellow  and  white  yarn;  make  2)  
1)  6  sc  in  a  mr  (6)  
2)  *2  sc,  inc*,  repeat  **  twice  (8)  
3-­‐4)  sc  even  (8);  F/O  and  leave  a  long  tail  to  attach  the  claw  to  the  thigh.  
Stuff  the  claw  firmly.  
 
 
 

4
 
WINGS    (rust  and  white  yarn);  make  2  
Make  1  long  feathers:    
1)  working  with  rust  color  yarn,  6  sc  in  a  mr  (6)  
2)  *2  sc,  inc*,  repeat  **  twice  (8)  
3-­‐5)  sc  even  (8);  F/O  and  hide  the  yarn.    
Make  3  short  feathers:  
1)  working  with  rust  color  yarn,  6  sc  in  a  mr  (6)  
2)  *2  sc,  inc*,  repeat  **  twice  (8)  
3-­‐4)  sc  even  (8);  F/O  an  hide  the  yarn  for  2  of  them.  Once  you  finish  working  on  the  third  do  not  cut  
the  yarn.  
Now  it’s  time  to  assemble  the  wing:  
1)  crochet  4  sc  from  the  #4,  4  sc  from  the  #3,  4  sc  from  the  #2,  8  sc  from  the  #1,  4  sc  from  the  #2,  4  sc  
from  the  #3,  4  sc  from  the  #4  (32)  
2)  switch  to  white  yarn,  *2  sc,  dec*,  repeat  **  around  (24)  
3)  *2  sc,  dec*,  repeat  **  around  (18)  
4)  sc  even  (18)  
5)  *1sc,  dec*,  repeat  **  around  (12)  
6-­‐9)  sc  even  (12);  flatten  the  top  and  crochet  through  both  layers.  
F/O  and  leave  a  long  tail  to  sew  the  wing  to  the  side  of  the  lower  body.  
 
 
 
 
 
 
 
 
TAIL’S  FEATHERS    (brown  yarn;  work  in  rows,  ch  1  and  turn  at  the  end  of  each  row)  
Short  length  feather  (make  2)  
1)  4  ch,  1  sc  in  the  2nd  ch  from  the  hook,  2  sc  (3)  
2-­‐8)  sc  even  (3)  
9)  inc,  1  sc,  inc  (5)  
10)  sc  even  (5)  
11)  dec,  1  sc,  dec  (3)  
12)  1  sc,  dec  (2)  
13)  1  dec  (1);  F/O,  cut  and  hide  the  yarn.  
Medium  length  feather  (make  2)  
1)  4  ch,  1  sc  in  the  2nd  ch  from  the  hook,  2  sc  (3)  
2-­‐12)  sc  even  (3)  
13)  inc,  1  sc,  inc  (5)  
14)  sc  even  (5)  
15)  dec,  1  sc,  dec  (3)  
16)  1  sc,  dec  (2)  

5
17)  1  dec  (1);  F/O,  cut  and  hide  the  yarn.  
Long  length  feather  (make  3)  
1)  4  ch,  1  sc  in  the  2nd  ch  from  the  hook,  2  sc  (3)  
2-­‐16)  sc  even  (3)  
17)  inc,  1  sc,  inc  (5)  
18)  sc  even  (5)  
19)  dec,  1  sc,  dec  (3)  
20)  1  sc,  dec  (2)  
21)  1  dec  (1);  F/O,  cut  and  hide  the  yarn.  
Sew  the  feathers  to  the  back  of  the  lower  body.    
 

You might also like