Professional Documents
Culture Documents
4L - B1079
YES - Go to step 7.
NO - Intermittent failure. The daytime running light system is OK at this time. Check for loose or poor connections.
7. Turn the headlight switch ON, then push the combination light switch forward for high beams.
YES - Go to step 8.
NO - If one of the headlights doesn't come on, check the fuse and bulb, and for a poor ground (G201, G301) or an open in
the wire. If both headlights don't come on, go to step 11.
YES - Go to relay control module input test. See: Powertrain Management\Computers and Control Systems\Information
Bus\Testing and Inspection\Component Tests and General Diagnostics\Relay Control Module Input Test
NO - Substitute a known-good daytime running light control unit and recheck the system.
11. Check the No. 3 (10 A ) and No. 5 (10 A ) fuses in the under-hood fuse/relay box.
15. Check for continuity between left headlight high beam 2P connector terminal No. 2 and under-hood fuse/relay box
connector H (14P) terminal No. 8, and between right headlight high beam 2P connector terminal No. 2 and under-
hood fuse/relay box connector ti (14P) terminal No. 10.
Is there continuity?
http://alldatapro.com/alldata/PRO~V307693328~C43630~R0~OD~N/0/115013665/117156415/117156416/121636391/34853741/96340231/96340248/176614761/1… 2/3
1/21/2014 ALLDATA Repair - 2006 Honda Accord L4-2.4L - B1079
16. Check for continuity between each headlight high beam 2P connector terminal No. 1 and body ground.
Is there continuity?
YES - Faulty relay control module; replace the under-hood fuse/relay box.
http://alldatapro.com/alldata/PRO~V307693328~C43630~R0~OD~N/0/115013665/117156415/117156416/121636391/34853741/96340231/96340248/176614761/1… 3/3