Professional Documents
Culture Documents
Advantages:
High Thermal insulation – It keeps our warm air in summer thus reduces the air
conditioning cost by 30%.
Rapid assembly – Due to lighter in weight & larger in size labour can assembly it quickly
that automatically increases labour Productivity
High fire insulation – 3 Times or more fire resistant than conventional clay bricks.
High workability – Renacon AAC blocks can be nailed, drilled and cutted for any kind of
Plumbing and electrical workings.
Raw Materials:
Residential, Multi storey building, Hospitals, Hotels, Office buildings & Commercial and
Industrial walls
Renacon AAC blocks are used to build reinforced load bearing and non-load bearing
exterior and interior walls for residential, multi storey buildings, hospitals, hotels, office
building , fire and shaft walls, commercial and industrial walls.
Application Methodology:
Step 1: Before placing the Renacon AAC block in the wall structure , clean the Block with
wet cloth.
Step 2: After placing apply specially made Renabond in L shaped manner, to bond
strongly both horizontally and vertically with the next block. (Cement mortar cost is
saved)
Step 4: For better bonding, we Renacon AAC block recommend to give a 3 MM thickness
cement mortar vertically if the height of the wall goes beyond 6 ft.
Sizes of the block and blocks per cubic meter:
Renacon AAC block is non-toxic. Use of gloves and goggles is recommended. Any
splashes to the skin or eyes should be washed off with clean water. In the event of
prolonged irritation, medical advice should be sought.
#Note: These test values were obtained during our laboratory tests. Site mixes may
show slight differences in performance due to methods of applications.