Professional Documents
Culture Documents
第1 页,共 55 页
目 录
1 OVERVIEW .................................................................................................................................................... 4
1.1 WEB CONNECTION ................................................................................................................................... 4
1.1.1 Log in ..................................................................................................................................................... 4
1.1.2 WEB Management Home................................................................................................................... 4
1.1.3 WEB Timeout ....................................................................................................................................... 5
1.1.4 Logout.................................................................................................................................................... 5
2 SYSTEM CONFIGURATION ............................................................................................................................ 6
2.1 BASIC INFORMATION ................................................................................................................................. 6
2.2 RUNNING STATE ........................................................................................................................................ 6
2.3 USER MANAGEMENT ................................................................................................................................. 6
2.4 FILE MANAGEMENT ................................................................................................................................... 7
2.4.1 Current Version .................................................................................................................................... 7
2.4.2 Version Upgrade .................................................................................................................................. 7
2.4.3 Upload configuration file ..................................................................................................................... 7
2.4.4 Download configuration file ................................................................................................................ 8
2.4.5 Download running configuration file ................................................................................................. 8
2.4.6 Save all configuration.......................................................................................................................... 8
2.5 SYSTEM TIME ............................................................................................................................................ 8
2.6 PING DIAGNOSTICS ................................................................................................................................... 9
2.7 LOG INFORMATION .................................................................................................................................. 11
2.8 RESTORE TO FACTORY SETTING............................................................................................................. 11
2.9 DEVICE REBOOT ..................................................................................................................................... 11
2.10 LOGOUT ................................................................................................................................................. 12
3 NETWORK CONFIGURATION ...................................................................................................................... 13
3.1 MANAGEMENT IP ADDRESS CONFIGURATION ........................................................................................ 13
3.2 STATIC ARP ............................................................................................................................................. 13
3.3 HOST ROUTING ....................................................................................................................................... 14
4 TRUNK ......................................................................................................................................................... 16
4.1 STATIC AGGREGATION ............................................................................................................................ 16
4.2 DYNAMIC AGGREGATION ........................................................................................................................ 18
5 PORT CONFIGURATION .............................................................................................................................. 21
5.1 PORT SETTING ........................................................................................................................................ 21
5.2 STORM CONTROL .................................................................................................................................... 22
5.3 PORT MIRRORING ................................................................................................................................... 24
5.4 PORT ISOLATION...................................................................................................................................... 25
6 VLAN CONFIGURATION ............................................................................................................................. 28
6.1 VLAN CONFIGURATION .......................................................................................................................... 28
6.2 PORT BASED VLAN ................................................................................................................................ 29
7 PON MANAGEMENT ................................................................................................................................... 31
7.1 DBA PROFILE CONFIGURATION ............................................................................................................. 31
7.2 CAPABILITY PROFILE MANAGEMENT ...................................................................................................... 32
7.3 LINE PROFILE MANAGEMENT ................................................................................................................. 34
第2 页,共 55 页
7.3.1 Create a new line profile ................................................................................................................... 35
7.3.2 Set the tcont info and DBA binding ................................................................................................. 35
7.3.3 configure the GEM port..................................................................................................................... 36
7.3.4 gemport and flowid mapping............................................................................................................ 37
7.4 SERVICE PROFILE CONFIGURATION ....................................................................................................... 39
7.5 WARNING PROFILE MANAGEMENT ......................................................................................................... 41
7.6 OLT MANAGEMENT ................................................................................................................................. 43
7.7 ONU MANAGEMENT................................................................................................................................ 44
7.7.1 ONU List.............................................................................................................................................. 44
7.7.2 ONU Basic Information ..................................................................................................................... 44
7.7.3 Binding configuration ........................................................................................................................ 45
7.7.4 WAN Configuration ............................................................................................................................ 47
7.7.4 WIFI 2.4G Configuration ................................................................................................................... 51
7.7.5 WIFI 5G Configuration ...................................................................................................................... 52
7.7.7 Loop Detection ................................................................................................................................... 52
7.7.8 Warnprofile Configuration ................................................................................................................. 53
7.7.9 ONU Upgrade .................................................................................................................................... 54
第3 页,共 55 页
1 Overview
This chapter explains how to set up and manage OLT/ONU by web,mainly includes:
➢ OLT Maintenance: System reboot, settings backup, configuration save,configuration restore ,
software upgrades, login account management and so on.
➢ Network Configuration: Manage IP address configuration, configure static ARP, and set host
routes.
➢ Trunk:Configure static aggregation and dynamic aggregation.
➢ Port Management: Set admin State, speed, duplex, auto negotiation, flow control and other
parameters of the ports.
➢ VLAN Setting: Create VLAN, set IP address, network mask,gateway of VLAN,the vlan parameters
of the port..
1.1.1 Log in
Please set fixed IP address of your computer as :192.168.20.XXX:(XXX is 2~253).And the subnet
mask is 255.255.255.0.The default IP address of the OLT is 192.168.20.1.Just type 192.168.20.1 in the
address bar of your web browser, then click <Enter>. The Log In dialog box appears.
Select Role: You can log in using the default username(admin) and password(admin).click the "Login"
button, and you will enter the WEB management home page.
Note:
The default password of the OLT is set at the factory. You can also change the password in the System
Configuration -> User Management page of the OLT. If the OLT is restored to factory settings, the
default password admin will be restored.
第4 页,共 55 页
1.1.3 WEB Timeout
If there is no action to the web management page for more than 5 minutes, you will log out
automatically .If you want to continue operating, please log in again.
1.1.4 Logout
Click menu “Logout” , you can quit the Web setting page.
第5 页,共 55 页
2 System Configuration
Select menu "System Configuration -> Basic Information", the host information and product
information will be displayed as shown in the figure, where the host information can be edited and
modified.
Select the menu "System Configuration -> Running State" to view the Running Time, CPU Usage and
Memory Usage.
You can change the password by selecting the menu "System Configuration -> User
Management".
第6 页,共 55 页
2.4 File Management
Select the menu "System Configuration -> File Management" to view the current version.
Through a firmware upgrade, you can load the latest software version to the OLT equipment to get
more features and more stable performance.
1.Select the menu "System Manage -> Upgrade Manage," click "Browse" button, select the need to
upgrade the software.
2.Click "Start Upgrade" button to begin the upgrade.
3.After waiting a while, the system returns the following page, click "Reboot System" button to restart
the device to complete the upgrade.
Note:
Do not power off during the upgrade process, otherwise may cause OLT device is not working properly.
Select the configuration file you want to upload, click Browse here, select Local File, and click Upgrade
第7 页,共 55 页
to update the configuration.
Select the menu "System Configuration -> System Time", modify the system time, and click "Modify" to
save the current configuration of the OLT.
第8 页,共 55 页
2.6 Ping Diagnostics
In the ip address box, enter the ip address that needs to be pinged, as shown below: Enter
192.168.10.100, and then click Start.
第9 页,共 55 页
The result is that the ip address 192.168.10.100 can be pinged.
第10 页,共 55 页
2.7 Log Information
When the web implements some configuration or operation, it is recorded in the log output.
Select the menu "System Configuration ->Restore to factory setting " and click "Recover" to restore the
factory settings of the OLT.
NOTE:You need to manually restart the device to make the restore take effect.
Select the menu "System Configuration ->Device Reboot", you can check whether to save the current
configuration, and click "Reboot" to manually restart the OLT device.
第11 页,共 55 页
2.10 Logout
Select the menu "System Configuration -> Logout", click "Logout" to exit the OLT WEB end and return
to the login interface.
第12 页,共 55 页
3 Network Configuration
Select the menu "Network Configuration -> Manage IP Address Configuration". On this page, you can
modify the IP address required to log in to the OLT.
There are two different ARP entries in the ARP table, one is static ARP and the other is dynamic ARP.
➢ Static ARP is an ARP entry configured by the user. The system does not automatically refresh and
delete the system. You need to manually complete the ARP entry.
➢ Dynamic ARP is automatically generated by the system based on the received ARP request or
response packet. The system automatically creates and deletes the ARP.
➢ Real-time update and maintenance, without user intervention, but you can manually delete
dynamic ARP entries.
第13 页,共 55 页
Step4: Select the IP address and click “Delete” to delete the dynamic ARP or static ARP.
Select the menu "Network Configuration -> Host Routing", on this page you can set the host route.
第14 页,共 55 页
The steps to configure static routing are as follows:
Step4: To delete, check the host route and click “Delete” to complete.
第15 页,共 55 页
4 Trunk
Select the menu "Port Aggregation -> Static Aggregation", on this page you can configure a static
aggregation group.
第16 页,共 55 页
Step 4: After the configuration is complete, the system supports the load balancing function of the
aggregation group, which can be changed. Select the desired load balancing algorithm and click
"Modify" to change it.
第17 页,共 55 页
Step 5: If you need to delete the port member of the static aggregation group, click the first “delete” to
succeed.
Step6: If you need to delete the static aggregation group, click the second “delete” to success.
Select the menu "Port Aggregation -> Dynamic Aggregation", on this page you can configure the
dynamic aggregation group.
第18 页,共 55 页
The steps to configure a dynamic aggregation group are as follows:
Step 1: In the port under LACP configuration, select the required port, for example, select gpon1.
Step2: Enter the group ID and select Active or Passive in the mode.
Step4: If you need to add multiple port members in the same aggregation group, you can complete the
configuration by repeating Step1.
第19 页,共 55 页
Step 5: After the configuration is complete, the system supports the load balancing function of the
aggregation group, select the required load balancing algorithm, and click “Modify”.
Step6: If you need to delete the port member of the aggregation group, select the port member and
click the first “delete” to succeed.
Step7: If you need to delete the aggregation group, just click the second "delete" to be successful.
第20 页,共 55 页
5 Port Configuration
Select the menu "Port Configuration -> Port Setting", where you can see the ports that can be
managed and the status of the ports.
第21 页,共 55 页
You can check the port range and check the port state, speed and flow control parameters.
Configurations such as port management status are available. The port adaptation function is enabled
by default. After the shutdown, you can manually modify the port rate and duplex mode. On this page,
you can also enable or disable port flow control.
You can perform storm control configuration for broadcast/multicast/unknown list broadcasts.
第22 页,共 55 页
Rate Limit : Specifies the maximum rate that the interface is allowed to pass, ranging from 0-100000
kbps.
Packets Limit : Specifies the maximum number of packets that can be forwarded per second. The
number of packets is pps (packets per second). The value ranges from 0-100000 pps.
The storm control configuration is as follows:
Step1: Select the ports to be configured, such as gpon2 and gpon3.
Step2: Select broadcast, multicast or unknown unicast, etc., and enter the values in the range.
Step3: Click”modify” to configure and display.
第23 页,共 55 页
5.3 Port Mirroring
Select the menu "Port Configuration -> Port Mirroring", on this page you can add a mirroring
configuration.
第24 页,共 55 页
After modifying the configuration, click the option button before configuration, reset the ports and
direction, click ”Modify” to modify the mirror configuration, or select the configuration and click the
“Delete” button to delete the mirror configuration.
Select the menu "Port Configuration -> Port Isolation",on this pages you can add ports for isolation.
第25 页,共 55 页
Port isolation can be based on the following steps:
Step1: Select the ports in the list that need to be isolated:
Step2: At this time, the port range will display the selected port information, and select the port isolation
enable or disable.
Step3:Click the "Modify" button, the configuration is successful.
第26 页,共 55 页
After modification, as shown below.
第27 页,共 55 页
6 VLAN Configuration
第28 页,共 55 页
Modify the configuration, click the Options button before configuration, re-enter the name, click
"edit" to modify VLAN configuration, you can also select the article configured to remove the VLAN
configured as required click on the "delete" button.
Select the menu "VLAN Configuration -> Port Based VLAN". On this page, you can add the
configuration of the port VLAN.
第29 页,共 55 页
Step3: Click the "Modify" button to complete the modification of the port VLAN Mode.
Step4: Allowed VLAN ID column can be added or deleted, and allowed VLAN ID.
第30 页,共 55 页
7 PON Management
7.1 DBA Profile Configuration
Select the menu "PON Management-> DBA Profile Management". The DBA is mainly used to limit the
upstream bandwidth of the ONU.
Name: DBA profile name. If not specified, the system will automatically adopt the default name
"dbaprofilex" and "x" is the number of the DBA profile.
ID: DBA profile number. If not specified, the system will automatically assign the smallest profile number.
Value range: 11-512.
Fixed bandwidth: This part of the bandwidth is fixedly allocated to the user, even if the user does not
use it, other users can not occupy. The value ranges from 256 to 1244160 Kbit/s.
Guaranteed bandwidth: This part of the bandwidth is allocated to the user. If the user does not use it,
other users can occupy this part of the bandwidth. The value ranges from 256 to 1244160 Kbit/s.
Maximum bandwidth: The maximum bandwidth value that a user can use. The configuration needs to
follow fix <= assure <= max. The maximum bandwidth value range: 256 ~ 1244160Kbit / s.
Type: Five types of DBA configuration profiles
Type Description Fixed Guaranteed Maximum
Type1 Fixed bandwidth √
Type2 Guaranteed bandwidth √
Type3 Maximum +Guaranteed √ √
Type4 Maximum bandwidth √
Type5 Fixed+Guaranteed+Maximum √ √ √
1. DBA profile creation:
Step1:Fill in the name or ID (only select one of them to input);
Step2:Select the type of DBA profile. There are five types can be selected according to the actual
situation. For example, select type5 and set the corresponding parameters. Then click “Add” button to
complete the creation of the DBA profile.
第31 页,共 55 页
2. Modify the DBA profile configuration.
Step 1: Select the previous option, modify the parameters and Click “Modify” to modify the configuration
successfully.
第32 页,共 55 页
Types: Gigabit; fast; any
Way: Select auto for automatic matching; Select num if you need to configure the specific number.
Ethernet ports number: the value ranges from 0 to 32.
The capability profile configuration steps are as follows:
Step1: In the capability profile configuration bar, fill in a name or ID;
Step2: Click “Add” to add a new capability profile successfully.
Step3: Change the parameters and click "Configure" button to modify successfully.
第33 页,共 55 页
Step4: Delete the configuration, select the option before the configuration, and click “Delete”.
第34 页,共 55 页
7.3.1 Create a new line profile
Type in the Name or the ID(make sure only choose one item to type in),then click the “Add” button to
create a new line profile.
Step2: choose the “add” operation and select the tcont type, input the tcont ID and select a DBA profile
to bind it with the tcont. Then click the “Configure” button to finish the adding of a tcont.
At first, click the line profile you want to configure. Change the parameters and choose the “mo
dify” operation, then click the “Configure” button to finish the modification of a tcont.
第35 页,共 55 页
3. Delete a tcont
At first, click the line profile you want to configure. Type in the tcont id and click the “Delete” button to
delete this tcont.
Step2: choose the “add” operation and type in the GEM id and the tcont id, click the “confirm” button to
add a GEM port.
第36 页,共 55 页
2. Modify the Gemport info
At first, click the line profile you want to configure. Change the parameters and choose the “mo
dify” operation, then click the “confirm” button to finish the modification of a gem port.
At first, click the line profile you want to configure. Choose the “delete” operation, then click the
“confirm” button to delete a gem port.
第37 页,共 55 页
Step2: set the Mapping Mode
Step3:configure the mapping relationship of the gemport and flowid. For example, map id as “1”,
gemport id as “3”, map it with the eth port “1”.
In the CLI command is like this: gemport mapping 1 gemport 3 eth 1
第38 页,共 55 页
7.4 Service Profile Configuration
Select the menu "PON Management-> Service Profile Management", and you can configure the VLAN
for different ports of the ONU in the service profile.
Step2:Select a capability profile and click the “Confirm” button to bind it with the new service profile.
第39 页,共 55 页
2. Configure the VLAN:
Select the service profile to be configured, enter the port to be configured, select the VLAN mode:
transparent / tag / trunk / translation, and enter the specific values required.
For example: select “sfu” profile, input the port 2,choose VLAN mode as tag and set VLANID as
2100.Click the “Configure” button to finish the configuration.
第40 页,共 55 页
4. Delete the service profile:
Select the service profile to be deleted and click the "Delete" button.
第41 页,共 55 页
The steps for configuring the alarm profiles are as follows:
1. Create a warning profile:
Enter the name or ID, for example, enter the name “w1” and click “Add” to add the configuration
successfully.
In the warning configuration column, enable the warnings and click the "confirm" button.
第42 页,共 55 页
3. Delete the alarm profile:
To delete the configuration, select the warning profile to be deleted and click “Delete”.
第43 页,共 55 页
7.7 ONU Management
Select the menu "PON Management -> ONU Management",and view the registration information of the
ONU.
In this page, you can manage, re-register, reboot, and add offline configurations for the ONU.
Click the "Manage" operation button in the ONU registration list, and it will turn to the ONU
management page.
On the ONU management page, you can view the ONU information, perform WAN configuration, WiFi
2.4G configuration, WiFi 5G configuration, binding profile, loop detection and alarm configuration, etc.
On the home page of the ONU management page, you can view the basic ONU information:
第44 页,共 55 页
7.7.3 Binding configuration
Select the Bindings tab to bind the service profile and line profile and configure the description.
Note:
➢ Service profiles can be used to configure VLAN information for ONU ports,still need to configure
the gemport and flowid mapping in the line profile for the vlan setting to take effect. And through
binding the DBA profile with the tcont in the line profile to limit the upstream rate of the ONU.
➢ Bind the service profile and line profile for the onu before you configure the loop detection,Alarm
profile,wifi_2.4G,wifi_5G and WAN info.
Step 1: Select the line profile and service profile to be bound, configure the description information, and
click the "Bind" button.
第45 页,共 55 页
The following prompt message will be displayed, suggesting that the binding configuration will take
effect after applying, click the "OK" button.
Step2: Click the "Apply" button to send the binding configuration to the ONU to complete the binding
configuration.
Click the "Unbind" button to complete the unbinding of the profile information
第46 页,共 55 页
7.7.4 WAN Configuration
Select the "WAN Conf" tab to configure WAN Info for the ONU.
Step1: If there is no WAN configuration by default, when clicking the "WAN Conf" tab, a prompt box will
pop up as follows, click "OK".
Step2: Enter the initial configuration WAN connection page, and click the "Create" button:
Step3: Enter the WAN connection configuration page, after configuring the parameters, click the
"Confirm" button to create the first WAN connection successfully.
第47 页,共 55 页
7.7.4.2Add a WAN connection
Step1: An existing WAN connection is as follows, if you want add a new link, please click the “Create”
button firstly:
Step2: Modify the parameters based on this WAN connection,for example, change Wan Mode to Bridge,
Service Type to Other, select the LAN1 port to be bound, and input the VLAN ID as 2100. Click the
"confirm" button to add a new WAN connection.
第48 页,共 55 页
Step3:After create successfully, WAN configuration page will add a new page, Total pages will increase
by 1, if the WAN connection is successfully issued and the connection is established, the status will be
displayed as connected
第49 页,共 55 页
Step2: Modify the corresponding parameters as required, and click "Modify" to complete the
configuration modification.
第50 页,共 55 页
deleted:
Step2: Click the "Delete" button to complete the deletion of the WAN connection.
Select the "WIFI 2.4G Configuration" tab, and then configure the 2.4G WIFI.
第51 页,共 55 页
7.7.5 WIFI 5G Configuration
Select the "WIFI 5G Configuration" tab, and then configure the 5G WIFI.
Select the "Loop Detection" tab to modify the loop detection configuration of each port onu
By selecting UNI PORT and Enable Loop/Disable Loop, enter the interval value and click "Confirm" to
configure the success.
第52 页,共 55 页
There will be the following prompt message, suggesting that the binding configuration will take effect
after it is applied, click the "OK" button:
Click the "Apply" button to send the binding configuration to the ONU to complete the binding
configuration.
Select the "Alarm Conf" tab to modify the alarm profile bound by onu:
第53 页,共 55 页
Select the added warning profile from the list of warning profilest and click”Confirm”.
Select the menu "PON management-> ONU management", you can upgrade ONUs under the same
PON port individually or in batches.
Step1: Select the ONU that needs to be upgraded and the Port ID where it is located, and click "ONU
Upgrade";
Step2: Click "Choose file" to select the version file to be upgraded, and click "Upgrade";
The whole process will take a few minutes. Do not cut off the power or unplug the network cable during
this time.
第54 页,共 55 页
When the system prompts that the upgrade is successful, you can proceed to the next step.
Step3: Upgrade successfully, check the upgrade status and registration status, wait for the upgrade
status to display as "upgrade success", the registration status as "config ok", and click
"commit";
Step4: If the system prompts "commit success", the ONU upgrade is successful.
第55 页,共 55 页