Professional Documents
Culture Documents
R17
3 If the total power is 100W and carrier power is 100W,then what is modulation index? [ ]
[A] 1 [B] 0
[C] 2 [D] 0.33
6 An audio signal 3 sin 2π(1000) t amplitude modulates a carrier signal given as 5 sin [ ]
2π(4000) t. The upper and lower side frequency components are
[A]1. 5000Hz& 3000Hz [B] 5000Hz & 3000Hz
[C] 2000Hz & 5000Hz [D] 5000Hz&1050Hz
7 An audio signal 3 sin 2π(3400) t amplitude modulates a carrier signal given as 5 sin [ ]
2π(5000) t. The band width is
[A] 3400Hz [B] 6800 Hz
[C] 5000Hz [D] 10000Hz
8 An audio signal 3 sin 2π(2000) t amplitude modulates a carrier signal given as 5 sin [ ]
2π(5000) t. The upper and lower side frequency components are
[A]2. 5000Hz& 3000Hz [B] 7000Hz & 3000Hz
[C] 2000Hz & 5000Hz [D] 5000Hz&1050Hz
9 Calculate the modulation index if Message amplitude is 3V and Carrier amplitude is 9 V. [ ]
[A] 0.5 [B] 0.6
[C] 0.7 [D] 0.3
10 An audio signal 3 sin 2π(4000) t amplitude modulates a carrier signal given as 5 sin [ ]
2π(5000) t. The band width is
[A] 3400Hz [B] 6800 Hz
[C] 5000Hz [D] 8000Hz
11 In filter method of SSB generation ,the separation between USB and LSB is [ ]
[A] Twice the lowest message frequency [B] Three times the lowest message
frequency
[C] Twice the highest message [D] Same
frequency
17 The bandwidth of the VSB modulated wave, if the vestige is 1.5 KHz and message is [ ]
band limited to 4.5 KHz is
[A] 6 KHz [B] 9 KHz
[C] 7.5 KHz [D] 4.5 KHz
18 Power saving in SSB when compared to AM which has modulation index 0.5 is [ ]
[A] 88.88% [B] 85%
[C] 94.44% [D] 95%
19 Quadrature Null effect can be avoided by using [ ]
[A] Costas Loop [B] Square law modulator
[C] Band pass filter [D] Low pass filter
20 In commercial TV transmission in India, picture and speech signals are modulated [ ]
respectively
[A] VSB and VSB [B] VSB and SSB
[C] VSB and FM [D] FM and VSB
***