Professional Documents
Culture Documents
Gilat P/Ns:
AN-7001-XX
1.1.1. Input Signals (supplied to the ODU via its input connector):
1.1.1.1. DC power
1.1.1.2. IF in
2. Characteristics
The following subparagraphs define the performance and physical characteristics.
Page 2 of 7
2.1.2.3. P1dB Output Power 33.5dBm min.
at any given Frequency, Temperature,
and DC Supply Voltage.
Page 3 of 7
2.1.4. LO Characteristics
Page 4 of 7
3. DC Characteristics
3.2.1. Configuration
The unit shall be Feed mount.
3.2.2. Dimensions
The dimensions of the units will not exceed the maximum
dimensions shown in figure 4.
The dimensions and Outline of the unit shall comply with the
requirements specified in source control drawing.
3.2.3. Connectors
Connectors shall as follow:
3.2.4. Weight
The weight of the Ku-band transmitter shall be less than 1200 grams.
3.2.5. Sealing
The unit should be environmentally sealed (connectors, covers and
wave guide port) against humidity, rain, dust and sand for the lifetime
of unit.
Page 5 of 7
Figure 3 : Wave- guide Interface
Page 6 of 7
Figure 4 : Maximal unit dimensions
Page 7 of 7