Professional Documents
Culture Documents
STPS2045C: Power Schottky Rectifier
STPS2045C: Power Schottky Rectifier
A1
K
Description
A2
Dual center tap Schottky rectifier suited for switch
mode power supply and high frequency DC to
K
DC converters. Packaged either in TO-220AB,
TO-220FPAB, or D²PAK, this device is especially
intended for use in low voltage, high frequency
A2 inverters, free wheeling and polarity protection
K
A2
A1
K applications.
A1
Table 1: Device summary
TO-220AB TO-220FPAB
Symbol Value
K K IF(AV) 2 x 10 A
VRRM 45 V
VF (typ.) 0.5 V
A2 A2
A1 A1 Tj (max.) 175 °C
D²PAK
Features
Very small conduction losses
Negligible switching losses
Extremely fast switching
Insulated package: TO-220FPAB
Insulating voltage = 2000 VRMS sine
Avalanche rated
ECOPACK®2 compliant component for
D²PAK on demand
1 Characteristics
Table 2: Absolute ratings (limiting values, per diode, at 25 °C, unless otherwise specified)
Symbol Parameter Value Unit
VRRM Repetitive peak reverse voltage 45 V
IF(RMS) Forward rms current 30 A
TO-220AB / Per diode 10
Average forward TC = 155 °C
D²PAK Per device 20
IF(AV) current A
δ = 0.5, square wave TC = 140 °C Per diode 10
TO-220FPAB
TC = 125 °C Per device 20
tp = 10 ms
IFSM Surge non repetitive forward current 180 A
sinusoidal
tp = 10 µs,
PARM(1) Repetitive peak avalanche power 280 W
Tj = 125 °C
VARM(2) Maximum repetitive peak avalanche voltage tp < 10 µs,
Tj < 125 °C, 60 V
VASM(2) Maximum single-pulse peak avalanche voltage IAR < 7.7 A
Tstg Storage temperature range -65 to +175
°C
Tj Maximum operating junction temperature (3) 175
Notes:
(1)For pulse time duration deratings, please refer to Figure 3. More details regarding the avalanche energy
measurements and diode validation in the avalanche are provided in the STMicroelectronics Application notes
AN1768, “Admissible avalanche power of Schottky diodes” and AN2025, “Converter improvement using Schottky
rectifier avalanche specification”.
(2)See Figure 9.
(3)(dP
tot/dTj) < (1/Rth(j-a)) condition to avoid thermal runaway for a diode on its own heatsink.
Notes:
(1)Pulse test: tp = 380 µs, δ < 2%
4 6
3
4
T
2 T
2
1
IF(AV) (A) δ = tp/T tp
T am b (°C)
δ = tp/T tp
0 0
0 1 2 3 4 5 6 7 8 9 10 11 12 0 25 50 75 100 125 150 175
Figure 3: Normalized avalanche power deratings Figure 4: Reverse leakage current versus reverse
versus pulse duration (Tj = 125 °C) voltage applied (typical values, per diode)
PARM (t p ) IR(µA)
PARM (10 µs) 5E+4
1
Tj = 150°C
1E+4
Tj = 125°C
1E+3 Tj = 100°C
0.1
Tj = 75°C
1E+2
Tj = 50°C
0.01
1E+1
Tj = 25°C
1E+0
t p (µs)
0.001
VR(V)
1 10 100 1000 1E-1
0 5 10 15 20 25 30 35 40 45
Figure 5: Relative variation of thermal impedance Figure 6: Relative variation of thermal impedance
junction to case versus pulse duration junction to case versus pulse duration
(TO-220AB, D²PAK) (TO-220FPAB)
Zth(j-c)/Rth(j-c) Zth(j-c)/Rth(j-c)
1.0 1.0
0.8 0.8
0.4 0.4
T T
δ = 0.2 δ = 0.2
0.2 0.2
δ = 0.1 δ = 0.1
Single pulse
t p (s) δ = tp/T tp Single pulse
t p(s ) δ = tp/T tp
0.0 0.0
1E-4 1E-3 1E-2 1E-1 1E+0 1E-3 1E-2 1E-1 1E+0 1E+1
500
200
VR(V)
100
1 2 5 10 20 50
Figure 9: Reverse safe operating area Figure 10: Thermal resistance junction to ambient
(tp < 10 µs and Tj < 125 °C) versus copper surface under tab for D²PAK
Rth(j-a) (°C/W)
80
Iarm(A)
70
60
50
40
30
20
Epoxy printed board FR4, eCU= 35 µm
10
SCu(cm²)
0
0 5 10 15 20 25 30 35 40
2 Package information
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK® packages, depending on their level of environmental compliance. ECOPACK®
specifications, grade definitions and product status are available at: www.st.com.
ECOPACK® is an ST trademark.
Cooling method: by conduction (C)
Epoxy meets UL 94,V0
Recommended torque value: 0.55 N·m (for TO-220AB and TO-220FPAB)
Maximum torque value: 0.7 N·m (for TO-220AB and TO-220FPAB)
This package drawing may slightly differ from the physical package. However, all
the specified dimensions are guaranteed.
3 Ordering information
Table 8: Ordering information
Order code Marking Package Weight Base qty. Delivery mode
STPS2045CT STPS2045CT TO-220AB 1.95 g 50 Tube
STPS2045CFP STPS2045CFP TO-220FPAB 1.9 g 50 Tube
STPS2045CG-TR STPS2045CG D²PAK 1.38 g 1000 Tape and reel
4 Revision history
Table 9: Document revision history
Date Revision Changes
05-Oct-2004 4F Last update.
Figure 16 (I²PAK Package Mechanical Data): references b1 and
01-Dec-2004 5
b2 changed from 1.17mm to 1.70mm.
Updated Table 2 (removed voltage). Updated ECOPACK
05-Feb-2010 6 statement. Updated Table 6.: TO-220AB package mechanical
data.
05-Mar-2013 7 Updated Table 3
Updated Features, Table 2, Figure 3 and D²PAK package
21-Oct-2014 8
information. Added Figure 9. Removed fig 4,5 and 6 of version 7.
17-Aug-2015 9 Corrected XML fragment and reformatted to current standard.
Remove of I²PAK package.
Updated cover page, Section 3.1: "Characteristics (curves)",
14-Oct-2016 10
Section 3: "Characteristics", Section 4.4: "D²PAK package
information" and Table 8: "Ordering information".
STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and
improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST
products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order
acknowledgement.
Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the
design of Purchasers’ products.
Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.
ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners.
Information in this document supersedes and replaces information previously supplied in any prior versions of this document.