Professional Documents
Culture Documents
Intended User
Congratulations on receiving your mobile fuel station. We are pleased to provide you with a
system designed to give you maximum reliability and efficiency.
Your fuel pump is designed, tested, and approved for use with gasoline blends, diesel fuel blends and
kerosene. Please take all due precautions when handling these flammable liquids. Your safety is
important to us.
Also, to assure the longest possible service life, it is important that you follow the operation and
maintenance procedures outlined in this manual. We are proud to provide you with a quality product and
dedicated support. Together with your conscientious use, we are sure that you will obtain years of safe,
dependable service.
Scope
This manual provides instructions for safety operation, programming, and maintaining Alliance
Portable fuel pumps and dispensers.
Operating the pump/dispenser
Programming the pump/dispenser
Preparing the pump/dispenser for service
Maintaining the pumps/dispenser
Storage and Transportation
Each product shall be packaged with Operation Manual and the list of spare parts.
The dispenser shall inclined 30° at most during transportation.
Keep the product from violent shock, collision and rain during transportation.
The dispenser must be stored in a dry, well ventilated and rain-free place without any harmful
gas from the corrosive metal.
SOLENOID
METERING UNIT
PUMPING UNIT
BALL VALVE
MOTOR 12v
FILTER
105cm
Note:
Unit equipped with explosion proof net.
DISPLAY 1
DISPLAY 2
NOZZLE BOOTH
KEYPAD 2
KEYPAD 1
Note:
Unit equipped with explosion proof net.
BREATHING VALVE 2 BREATHING VALVE 1
INLET 2 INLET 1 OUTLET 3/4 COMPUTER BOX
NOZZLE BOOTH
123cm
MICRO
SWITCH
SIGHT GAUGE
2KL-205cm 1KL-152cm
Note:
Unit equipped with explosion proof net.
Power Board/
Relay Board
12 DCV
Battery (3SM)
Converter or Contactor
Charger
Pumping Unit
Function Codes
To Clear Daily Reading To Set Date and Time Error Code Definition
Press F1 Press F1
6267 6267 1. E10 Password mistake
Press Total (CLEAR) Press 5 2. E11 FeRam mistake
Press Enter 65657952 3. E12 Time format
F3 YYYY, MM, DD, 24H format 4. E13 Enter time mistake
Enter 5. E14 Oil code mistake
To Restore All Data Press F3 6. E15 Nozzle No. mistake
Press F1 7. E16 Decimal point mistake
6267 To Switch on/off Backlight 8. E17 Query more times of sales
Press 0 Press F2 record
0047 Press 6 to switch off then press 6 to switch 9. E18 Sensor invalidation or pulser
Clear on again. malfunction
Press F3 10. E19 Coefficient mistake
Enter (Wait for 5-10seconds “888” To Lock/Unlock Dispenser 919191 error means the nozzle switch
Successful) Press F1 is on
Restart Power 6267 929292 pump is online
Press Stop (the display shows ----_)
Notes: Finish the initialization before 0049
turning off the power to avoid Press F3
FeRam error. Note-
- : Lock
H : Unlock