You are on page 1of 2

ESTADO DESCRIPCCION EXPECIFICACION ACTUAL

starter, and the engine ground must


be the correct size. Wires and cables
must be free of corrosion. Wires and
cables must have cable support
clamps in order to prevent stress on
battery connections (terminals).

Battery Test 12.4 VDC or more

Charging
18 VDC to 32 VDC
System Test
PROCEDIMIENTOS SEGÚN MANUAL OBSERVACIONES

Refer to Special
Instruction, SEHS7633,
"Battery Test
Procedure".

Refer to Special
Instruction, REHS0354,
"Charging System
Troubleshooting".

You might also like