Professional Documents
Culture Documents
Dslam 5616
Dslam 5616
MA5600 # config
MA5600 (config) # time 2008-06-11 11:00:00 -> date & local time
MA5600 (config) # auto-configuration enabled backup period
MA5600 (config) # auto-configuration backup period 1 time interval 01:00
MA5600 (config) # auto-enable data backup period
MA5600 (config) # auto-backup interval data period 1 time 00:00
Step Precaution!
MA5600 (config) # protect
MA5600 (config-protect) # protect first-group 0/8/0 eth 0/7/0 second workmodepor
tstate
MA5600 (config-protect) # quit
MA5600 (config) # sysname huawei
Step 1 Set the IP address of the inband NMS port (GE port).
Create an NMS VLAN
huawei (config) # vlan 10 standard
Add the upstream port to the VLAN
huawei (config) # vlan 10 port 0 / 7 0
huawei (config) # vlan 10 port 0 / 7 1 / / for 2Enter frame subtend to the VLAN
interface mode
huawei (config) # interface vlanif 10
Set the IP address of the VLAN interface
huawei (config-if-vlanif10) # ip address [ip_equipment]255.255.255.0
huawei (config-if-vlanif10) # quit
Step 2 Add a route.
huawei (config) # ip route-static 0.0.0.0 0.0.0.0 [ip_gateway]
Step 3 Set the SNMP parameters.
huawei (config) # snmp-agent sys-info version all
huawei (config) # snmp-agent community read public
huawei (config) # snmp-agent community write private
Step 4 Enable sending traps.
huawei (config) # snmp-agent trap enable standard
Step 5 Set the IP address of the target host for traps.
huawei (config) # snmp-agent target-host trap address [nms_server_ip] securityna
me private
Step 6 Set the IP address of the inband NMS as the source address for sending tr
aps.
huawei (config) # snmp-agent trap source vlanif 10
Step 7 Save the data.
huawei (config) # save
Configure ADSL
Step 1 Registering Adee MA5600 board to SCUB
huawei (config) # display board 0
if the board still in "auto_find" state, please run the command as below;
huawei (config) # board confirm 0
Step 2 Create smart VLAN for ADSL
huawei (config) # vlan 340 smart
huawei (config) # vlan 341 smart / / for subtend to frame 2
Add the upstream port to the VLAN
huawei (config) # vlan 340 port 0 / 7 0
huawei (config) # vlan 341 port 0 / 7 0 / / for subtend to frame 2
huawei (config) # vlan 341 port 0 / 7 1 / / for subtend to frame 2
Enter the VLAN interface mode