Professional Documents
Culture Documents
Candidates are required to give their answers in their own words as far as
practical.
Attempt all questions.
The figures in the margin indicate full marks.
All the question carry equal marks
__________________________________________________________________
1. Explain the laboratory procedure and generate tabular column to determine the average RHN
value for a given specimen of ferrous (cast iron) and non-ferrous (Aluminum) material.
(Assume the experimental test readings towards the close approximation range, when major
load applied was 150 Kgf and 100 Kgf for ferrous and non-ferrous specimen respectively).
2. Determine the Brinell hardness number for a ferrous (Mild-steel) and non-ferrous (Brass)
specimen. The indenter diameter of 2.5 mm and 5.0 mm were choosen for the ferrous and non-
ferrous material. The indentation diameter of the given specimen recorded experimentally by
the microscope for the mild-steel found to be 12, 11, and 10 units scale while brass as 15, 16,
and 19 units scale respectively. Find the BHN value of mild-steel and brass specimen?
3. Differenciate between Izod test and Charpy test?
4. Determine the impact strength and impact velocity of a given material utilizing Izod Impact
Specimen? (If the experimental test results recorded as: Final reading (R2) as 46 units, radius
of the pendulum 500 mm, Wt. of the pendulum 15 Kg, and the area below the notch of the
given specimen were 8×5 mm2).
5. Draw the nature diagram explaining the stress-strain for a ductile material (mild-steel), when
subjected to tensile in nature utilizing Universal Testing Machine (UTM).