Professional Documents
Culture Documents
2021
Quiz7 Marks:10
Exam starts at 10 AM Ends at 11.30 AM
Topic: Laterally restrained beams
Note: After completion, please convert your answer-script to pdf. Rename the file as “Quiz7” and
upload in the google drive, link of which is shared with you. Upload your files by 11.40 AM. While
answering, you must state your assumptions, show steps, and calculations or marks will be
deducted. Please take 3 digits after decimal for calculations.
Question
A beam with overhang is shown in Figure 1a. It is a laterally supported beam. It is made of welded
built-up I section as shown in Figure 1b. The beam carries a load P1 at mid. Assume the web is not
having any transverse stiffener along the span but stiffeners are provided only at the supports.
(a)
P1 P2 (b) B
Tf
A C
B
tw d
Tf
4.0 m 4.0 m 1.0 m
FF = 0.25* (First 3 digits of your roll number + Last 3 digits of your roll number)
P2 = To be determined
Figure 1
(i) Classify the cross-section. +2
(ii) Assess the safety of the beam under ultimate limit state. +6
(iii) Determine what is the value of P2 that we can apply on the system in addition to P1. +2
Neglect the self-weight of the beam. Assume all the loads are factored.
-END-