Professional Documents
Culture Documents
Datalink layer
Transport layer
Network layer
Physical layer
3)According to OSI reference model, which layer is responsible for end to end
connection?
Transport layer
Physical layer
Network layer
4)A network administrator has captured a data frame in the network with the
destination MAC address of 01-00-5E-A0-B1-C3. The correct statement about
this MAC address is
The destinaton MAC address of this frame is the MAC address of the
router.
255.255.0.0
255.255.255.0
0.0.0.255
255.0.0.0
7)A network administrator uses the ping command to check for points of
failure in the network. Which protocol will be used during this process?
TCP
STP
UDP
ICMP
8)As shown in the figure below; Host A and Host B can communicate.
True
False
9)In the full duplex mode, the transmission of data is in both sides
simultaneously.
False
True
200.0.0.100/30
192.168.1.1/24
192.168.1.15/24
100.0.0.15/28
Transport Layer
Physical Layer
Network Layer
10.1.1.1
10.1.1.2
10.1.1.0
10.1.1.3
False
True
14)According to TCP/IP reference model, the fourth layer from the bottom is
…........
Transport layer
Session layer
Network layer
Application layer
15)Which layer of OSI model is responsible for routing of packets from one
local network to the next?
Layer 2
Layer 4
Layer 1
Layer 3
17)Which of the following applications can be used to detect the path along
which the data packets are transmitted from the source to the destinaton?
Route
Tracert
Send
Ping
18)A coaxial cable supports higher transmission speed than a fiber optic
cable.
True
False
Coaxial Cable
Serial Cable
Fiber Optic
20)If a data frame has a type field value = 0x806, this frame is an Ethernet
II frame.
False
True