Professional Documents
Culture Documents
Grundfos Brochuregeneral
Grundfos Brochuregeneral
We know that we have a responsibility towards encourage a certain Grundfos way of thinking
the people who are Grundfos, towards the which is founded upon the belief that everyone
innovative soul of Grundfos as well as towards must contribute by using his or her judgement
the surrounding world. Whatever we do, we and foresight. We are looking for commitment
make sure that we have a firm and sustainable and ideas in every-thing we do in order to make
basis for doing it. the best solu-tions. We think — and then we act.
INNOVATE
Innovation is the essence. It is the innovations that make
Heating and hot Cooling and air Industrial Pressure boosting Sanitary
water service conditioning applications and liquid transfer
systems systems
Circulator pumps Circulator pumps A wide range of Vertical and Hygienic end-
for circulation for circulation of multistage pumps horizontal, centri suction-centrifugal,
of hot water in cold water and for the transfer fugal pumps, and rotary positive
central and district other liquids in of water, cooling pressure boost- displacement, self-
heating systems cooling and air lubricants, and ing systems for priming and multi-
and circulation conditioning other liquids in liquid transfer and stage pumps for
in domestic hot systems. industrial and boosting of hot food, beverage, and
water service process systems. and cold water. pharmaceutical
systems. process systems.
3
CR-H, CRE-H CR, CRI, CRN CRE, CRIE, CRNE
Horizontal end-suction multistage pumps Vertical in-line multistage pumps Multistage centrifugal pumps electronically
controlled
H [ft] H [ft] H [ft]
900 900 800
800 800 700
700 700 600
600 600
500
500 500
400
400 400
300
300 300
200 200 200
Applications
Applications Applications
The pumps are suitable for liquid transfer in:
• Pressure boosting The pumps are suitable for liquid transfer in: The pumps are suitable for liquid transfer in:
• Industrial processes • Washing systems • Washing systems
• Boiler feed • Cooling and air conditioning systems • Cooling and air conditioning systems
• Liquid transfer • Water supply systems • Water supply systems
• Irrigation • Water treatment systems • Water treatment systems
• ANSI B73.1 replacement • Fire fighting systems • Fire fighting systems
• Industrial plants • Industrial plants
• Boiler feed systems • Boiler feeding systems
Features and benefits
• Low profile horizontal design
Features and benefits Features and benefits
• Cartridge shaft seal
• Maximized efficiency • Reliability • Wide range
• Service-friendly • High efficiency • Reliability
• Dimensional versions • Service-friendly • In-line design
• Space-saving • High efficiency
• Suitable for slightly aggressive liquids • Service-friendly
Optional • Space-saving
• Grundfos baseplate • Many control facilities
• Wireless remote control, R100 Optional
• D
ry-running protection and motor pro-
tection via LiqTec™ Optional
• Wireless remote control, R100
4
AvAIlAble onlY In cAnAdA
Multiple packaged pump system Advanced packaged pump system Pressure booster system
H [ft]
H [ft] H [ft] 1000
800
500 500 600
SMALL MED.
400 400 400 CR CR
300
300 300
200
200 200 LARGE
CR
100
100 100
80
60
0 0
0 400 800 1200 1600 2000 2400 2800 0 600 1200 1800 2400 3000 3600 40
Q [US GPM] Q [US GPM] 30
Technical data Technical data
20
Flow, Q (4 pump system): max. 2200 gpm Flow, Q (4 pump system): max. 2540 gpm 1 2 4 6 10 20 40 100 200 800
Head, H: max. 535 ft Flow, Q (6 pump system): max. 3800 gpm Q [US GPM]
Liquid temp.: +32°F to +176°F Head, H: max. 500 ft technical data
Working press.: max. 232 psi Liquid temp.: +32°F to +176°F
Flow, Q: max. 630 gpm
Working press.: max. 232 psi
Head, H: max. 995 ft
Applications Liquid temp.: -22°F to +250°F
• Residential/commercial buildings Applications
• Water supply systems BoosterpaQ systems are suitable for pres- Applications
• Industrial applications sure boosting in:
The pumps are suitable for:
• HVAC applications • Water supply systems
• Transfer and pressure boosting of clean
• Irrigation systems water in houses, cottages, farms, small
• Water treatment systems commercial and residential building
Features and benefits
• Fire fighting systems • Pressure boosting in other systems e.g.,
• Constant pressure, all variable speed control • Industrial plants
• Simple installation process water systems and irrigation
• HVAC systems
• Low-energy consumption
• Wide range features and benefits
Features and benefits • Eliminates control valves and
Optional • Constant pressure problematic pressure storage tanks
• Simple installation • Harmonic distortion protection built in
• E
xternal communication supports other • Low-energy consumption • Lower energy consumption
fieldbus protocols such as Modbus, • Wide range • Less pump noise
Profibus, LON, BACnet and more. • Many advanced control functions • Easy to set up and operate
• Intuitive control interface • Comprehensive protection of drive,
motor and pump equipment
Optional • Reduced maintenance
• S
upports other fieldbus protocols such as • Eliminates current in-rushes on the
Modbus, Profibus, LON, BACnet and more. AC line
• Protection from extreme voltage and
temperature conditions
5
SQ sp
H [ft]
H [ft] 2000
700
1600
600
500 1200
400
800
300
400
200
100 0
Applications Applications
The pumps are suitable for: The pumps are suitable for:
• Domestic water supply • Groundwater supply to waterworks
• Irrigation in horticulture and agriculture • Irrigation in horticulture and
• Groundwater de-watering agriculture
• Industrial applications • Groundwater de-watering
• Pressure boosting
• Industrial applications
Features and benefits • Domestic water supply
• Integrated dry-running protection
• Soft start
features and benefits
• Over, and undervoltage protection
• High-starting torque • High efficiency
• Overload protection • S tainless steel components provide
long service life
• Motor protection via CU 3
• Variable frequency drive compatible
motors
optional
• Motor protection via MP 204
• Performance data can be monitored via
CU 3/R100/PC Tool MP 204
6
GRUNDFOS CR
INNOVATION INSIDE
The Grundfos CR is different. As Grundfos LiqTec checks for liquid 24 hours a day
part of our constant dedication to For those who need to avoid dry-running altogether, the
innovation, we have tested new Grundfos LiqTec is the answer. Available with all CR pumps,
and alternative materials to bring the LiqTec is plug-and-play technology at its very best. Ever
you the best possible solution. vigilant, the LiqTec constantly checks that there is liquid in
This means that we can equip CR the pump. If there isn’t, it stops the pump immediately.
These savings will continue for years and years – for every
pump you own. Its low lifetime cost makes a CR pump a very
sensible investment. CR pump efficiency
[%]
Grundfos CR range. 70
60
50
40
30
20
Application type Typical duty point Operating hours Average kWh reduction
per day per year with CR
Industrial washing and cleaning 25 gpm @ 225 psi 5 hours 1,600 kWh
General industrial pump task 25 gpm @ 145 psi 10 hours 2,200 kWh
1
Getting the best possible overall efficiency out of your pump
makes financial sense. The narrow interval between CR pump
sizes allows you to eliminate the efficiency drop associated
with over-sized pumps.
By minimizing the difference between pump capacity and Internal leakage caused by pressure differentials
the required pressure and volume, you get a pump which runs within the pump was minimized. Tests have shown
as close to its optimum duty point as possible. That makes it that an impeller seal clearance gap of just 0.016”
as cost-efficient as possible. between the impeller and the chamber causes a 5%
drop in efficiency. When liquid seeps out into the
The result of years of Grundfos development work is a 10% pump, precious energy is wasted on circulating that
increase in pump efficiency. This translates into a power liquid. Grundfos uses a floating seal ring between
reduction of 15-20% for the CR pumps. When pumps are in chambers ,providing a nearly perfect seal.
operation many hours a day, such improvements provide
substantial savings – year in and year out.
60
50
2
An enhanced impeller design reduces eddy flow and
40 friction losses. We developed a highly specialized
30
laser-welding technology which brings you impellers
of truly superior design and construction.
20
10
0 1 2 3 4 5
gpm
Zero impeller seal clearance gap (theoretical)
0.004" impeller seal clearance gap
0.012" impeller seal clearance gap
The CR range has the What can you pump with a CR?
Choosing the right pump can be difficult. It may be easy Metasilicate-containing cleaning agents,
Abrasive liquids
abrasive alkaline cleaners, phosphates
enough to find a pump that will do the job, but it gets trickier
when you want an exact match. There are many good reasons Toxic or explosive Trichlorethylene, toluene, petroleum ,
to avoid over-capacity, with energy conservation at the top of liquids ethyl alcohol, methyl alcohol
the list. The CR range lets you choose pumps which exactly
High-viscosity Glycols, carboxylates (for cooling), lubricating
match your system demands. liquids oils, rapeseed oil
CR is available in 11 hydraulic sizes, four basic materials and Hardening liquids Water-based paint, glue, vegetable oils
about one million configurations. You can get CR pumps with Crystallizing Glycol additives, naphthalene, sugar
magnetic drives, with air-cooled shaft seal chambers, with liquids products (e.g. dextran), salts
double shaft seals, etc. Special CR pumps are available for
High pressures Water treatment, cleaning/washing
high-pressure performance, for aggressive liquids, and much
more. And there is a CR pump for almost any liquid you could Extreme Petrochemicals, oils, boiler feed, secondary
possibly want to pump. temperatures coolants
H [m] H [ft]
400
100
80
60 200
CRE 1 CRE 3 CRE 5 CRE 10 CRE 15
CRIE 1 CRIE 3 CRIE 5 CRIE 10 CRIE 15
40 CRNE 1 CRNE 3 CRNE 5 CRNE 10 CRNE 15
100 CRE
80 20
CRIE
20
60 20
CRNE
20
40
10 CRE 32 CRE 45
CRNE 32 CRNE 45 CRE 64
8 CRNE 64
20
2 4 6 8 10 20 40 60 80 100 200 400 600 800
TK00 CRE1 0104
Q [US GPM]
2 4 6 8 10 20 40 60 80 100 Q [m³/h]
CR Performance Range
H H
[m] [ft]
800 60 Hz
200
600
400
100
300
80 CR 1 CR 5 CR 15 CR 32 CR 64
CRI 1 CRI 5 CRI 15 CRN 32 CRN 64
60 200 CRN 1 CRN 5 CRN 15
CR 1s CR 3 CR 10 CR 20 CR 45 CR 90
40 CRI 1s CRI 3 CRI 10 CRI 20 CRN 45 CRN 90
CRN 1s CRN 3 CRN 10 CRN 20
30 100
80
20
60
40
10
30
20
1 2 4 6 8 10 20 40 60 80 100 200 400 600 800
Q [US GPM]
1 2 3 4 5 6 8 10 20 30 40 50 60 80 Q [m³/h]
CR Efficiency
Ef f
[%]
80
60
40
20
0
1 2 4 6 8 10 20 40 60 80 100 200 400 600 800
Q [US GPM]
Clamp coupling (NPT) - on request 1”, 1 1/4” 1”, 1 1/4” 1”, 1 1/4” 1”, 1 1/4” 1 1/2”, 2” 1 1/2”, 2” 2”, 2 1/2” - - - -
Union (NPT ext. thread) - on request 2” 2” 2” 2” - - - - - - -
CRT pipe connection: CRT 2 CRT 4 CRT 8 CRT 16
PJE coupling (Victaulic) - - 1 1/4” 1 1/4” 2” 2” - - - - -
ANSI Flange Size - on request - - - - 2” 2” - - - - -
Available
- Not available
10
State-of-the-art Hydraulics
Pump efficiency is maximized by
constant improvement of the high-
performance hydraulic design, and
precise manufacturing process
Wear-resistant Design
Designed to flush abrasive particles
from the pump, and made from
stainless steel to resist wear caused by
abrasives
Motors
Grundfos manufactures it’s own line of
quality submersible motors in a broad
variety of sizes. With the same stainless
steel construction and quality design as
our pumps, Grundfos can provide the
complete solution for your submersible
pumping needs
2
EFFICIENCY
Reduce your
operating costs
The total cost of owning and operating a pump over its entire
lifespan covers much more than just the initial cost – it covers
the total sum of the Life Cycle Costs of the pumping system.
Initial cost 5%
Maintenance cost 10%
Energy cost 85%
Grundfos WinCAPS for an optimum system selection Grundfos WinCAPS is a highly advanced
It all starts with the selection of the pumping system. In software tool designed to help our
order to get the full benefit of the more than $55 million customers assess wire-to-water efficiency
that Grundfos spends on research and development every and to compare Life Cycle Costs between
year, actual installation conditions must be fully analyzed alternative pumping solutions.
and the most effective pumping system selected to match
those conditions.
3
grundfos Submersibles
Grundfos 6”, 8” and 10” submersibles are supplied with a rugged Grundfos
submersible motor. Manufactured of stainless steel, the two units together
result in a quality pumping unit built to last.
2200
2100
2000 PERFORMANCE
1900
1800
1700
1600
1500
1400
1300
HEAD (FEET)
1200
1100
1000
900
800
700
600
500
400
85S 230S 385S 625S 1100S
300
150S 300S 475S 800S
200
100
0
0 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500
U.S. GALLONS PER MINUTE
4
4-Inch Submersibles
Grundfos’ 4” submersibles feature corrosion-resistant stainless steel
construction and are designed to provide years of trouble-free performance.
With built-in sand bearing protection, the 4” submersible can handle the
sandy conditions often found in domestic wells. Built-in, jam-free check
valves and special upthrust protection guarantee smooth running, fail-safe
operation. A user friendly cable guard aids in ease of installation.
2300
2200
2100 PERFORMANCE
2000
1900
1800
1700
1600
1500
1400 16S
HEAD (FEET)
1300
1200
1100
1000
900 40S
800 5S
700 10S
600
500 25S
400
300
200 60S
7S 75S
100
0
0 10 20 30 40 50 60 70 80 90 100
U.S. GALLONS PER MINUTE
5
grundfos Submersibles
3-Inch SQ Submersibles
Grundfos 3” SQ pumps combine state-of-the-art design with rugged, quality
construction. Designed to go into the same applications as standard 4” pumps,
SQ’s light weight and small size make for fast, easy installation, especially in
less-than ideal wells. With a host of advanced features, Grundfos’ 3” SQ
pumps set a new stardard for what a submersible pump should be.
6
Reliable built-in spring loaded
check valve lets you operate
the pump in any position from
vertical to horizontal.
800
PERFORMANCE
700
600
5SQ
500
HEAD (FEET)
/SQ
E
400
10
SQ
/SQ
300
E
15
SQ
200
/S
QE
22S
Q/
SQ
E 30SQ
100 /SQE
0
0 10 20 30 40
U.S. GALLONS PER MINUTE
7
Grundfos Service
TECHNOSUB.NET
1156 Larivière avenue, Rouyn-Noranda QC Canada J9X 4K8
T 819 797-3300 F 819 797-3060 info@technosub.net