Professional Documents
Culture Documents
Copylot Client MT4 - The client is a part of the copier, installed on the MT4 terminal, where
transactions will be copied.
Copylot Master MT4 - The master part of the copier is installed on the MT4 terminal, from where
transactions will be copied.
Copylot Client MT5 - The client is a part of the copier, installed on the MT5 terminal, where
transactions will be copied.
Copylot Master MT5 - The master part of the copier is installed on the MT5 terminal, from where
transactions will be copied.
Copylot DEMO - The client is a part of the copier, installed on the MT4 terminal, where transactions
will be copied.
Official page
Discussion
Complete instruction
All these qualities are inherent in one program - EXP - COPYLOT. The program can be run on
multiple terminal bindings. Use as a synchronizer of your trades on other investor accounts.
Trading on one account - COPYLOT will copy your positions and transactions to other
terminals.
Table of contents
Links: ................................................ .................................................. ...........................one
Installing the downloaded advisor / indicator for the MT4 / MT5 terminal: ........................... 3
The procedure for standard installation of the copier on 2 terminals Master and Client ... 16
The procedure for working with a copier from several masters and 1 client: ...................... 16
1. In order to find out the folder of your terminal, you need to start
the terminal and select the item in the file menu
- Open working folder
2. Files of experts ex4 / ex5 must be copied to the folder of
your terminal \ MQL4 (MQL5) \ Experts \
6. In the settings of the Expert Advisor, you must check the box
"Allow the Expert Advisor to trade" And Press the button "Auto
Trade".
five. After choosing a convenient payment method, you will be asked to enter
password for your MQL5 account
7. Youcan see all your purchased products at
the Purchased page in the Market tab of your terminal:
After that, you can install the purchased Expert Advisor on the chart.
Updating the EA to a new version.
In order to use the latest version of the purchased
product, you have a free opportunity to update it an
unlimited number of times.
Variety of lot selection for copying, the ability to copy only profitable trades, coups, own
stops and trawls. Converting positions into pending orders.
The ability to start copying from a specific position in the grid. And much more...........
Time blocks:
one.
Clients Sets https://youtu.be/WKJrtyjCwmw?t=54s
2. Clients Lots https://youtu.be/WKJrtyjCwmw?t=6m45s
3. Clients Function https://youtu.be/WKJrtyjCwmw?t=12m8s
Clients Copy Filter Sets https://youtu.be/WKJrtyjCwmw?t=18m40s
four.
MAIN FUNCTIONS
one. - Direct copying of the master account to the client account "1 in 1"
2. - Working with 4 and 5 digit brokers
3. - Copying from an investment account (investment password) to your trading account
four. - Unlimited number of terminals in a bundle (from 1 master to 10
clients or from 10 masters per client)
five. - Copying transactions to a trading account with changed names va-
lute pairs Suffixes (e.g. EURUSD_m)
6. - Automatic copying of gold and silver (GOLD <> XAUUSD and
Silver <> XAGUSD)
7. - Full support and handling of partial closure on the master
eight. - Manual intervention in closing deals on the client without consequences
nine. - Full pickup of orders after rebooting the client or master
10. - Duplication of a lot on 1 terminal when subscribing to the "SIGNALS" service
(Bypassing the limitation of open lots)
eleven. - Work in any OS (Windows XP, 7.8 VPS)
12. - Convenient chart of positions from the wizard in the client window
13. - Selection of order processing speed (Delay in ms in data exchange
between terminals)
LOT FUNCTIONS
one.- Copying a lot at risk from a master to a client (Opening lots on a client with a
risk in% of the master's account)
2. - Coefficient of the lot when copying (on the master of 0.1 lot, on the client
you can copy 0.2 lot)
3. - Custom lot (All transactions will be opened with the set lot)
four. - Limitation on the minimum lot (On the master 0.01 lot - on the client
0.1 lot)
five. - Opening a lot from% of the client's free funds (Our Autolot)
6. - Start copying only at least a set lot (Copying only from 0.1 lot for example)
7. - Close positions on the client, when closing positions on the master (You
can disable and close according to your own rules)
eight. - Delete orders on the client, when deleting orders on the master (You can
disable and delete according to your rules)
EXTRA FUNCTIONS
1. - Replacing master positions with client's pending orders (Convert positions into
pending orders)
2. - Disable the closing of positions on the client when the position is closed on the
master and enable one of the following actions:
3. - Enable trailing stop on the client when the position is closed on the master
4. - Set stop loss and take profit on the client when the position is closed on the
master
5. - Fix the breakeven on the client when the position is closed on the master
The procedure for standard installation of the copier on 2 terminals Master and Client
By default, you can install the copier without changing the parameters and copying of
positions will start immediately
one.
Install 2 terminals on your computer.
2. Install our Copylot Master on the terminal where signals will come from and from
where positions will be copied COPYLOT Master for MT4 or COPYLOT Master for
MT5
3. Install our Copylot Client on the terminal where you want to copy positions and signals
four. Start the first terminal with Master copier. This can be a demo account, an investor
account, or a real account with another advisor installed.
The procedure for working with a copier from several masters and 1 client:
If you need to copy from several terminals at once to 1 client
invoice, please adhere to the following instructions:
1. Install terminals in different folders with different names for example MT4Master1
MT4Master2 MT4Master3 and 1 client MT4Client1
2. All terminal shortcuts must be run as administrator !!!
3. In the archive you will find separate files of the Copier Wizard and the Copier Client
4. In the terminal folders, from where the transactions will be copied, you must install
COPYLOT MASTER
5. You must install COPYLOT CLIENT in the terminal folders where transactions will be
copied
6. On each master terminal, open 1 chart of any currency pair, TF and PAIR are not
important. For example EURUSD
7. Run COPYLOT MASTER on one chart of each terminal
8. In the pathWrite field of each terminal of the master, specify a separate data file, for
example: copylot1 copylo2 copylot3 and so on
nine. We launch the client terminal and open charts in the number of our master accounts
10. for each of the 3 (masters) charts, set COPYLOT CLIENT and in the pathRead field
specify our data files such as our masters copylot1 copylo2 copylot3 and so on
eleven. IMPORTANT: Each graph must have its own data file that created
earlier on master terminals
12. Required in all advisors, you must check the box "Allow
advisor to trade "
13. Turn on the ADVISORS button and our copier of transactions will start copying instantly
to your client's account.
If you need to broadcast your transactions to other accounts. Or YOU are in charge of
managing trade deals and you need to copy your deals to other accounts, then our copier will
suit you in full. Our copier is able to copy your accounts exactly to other accounts without
delay.
In order to copy 1 master account to several client accounts, you need to follow
several steps
one.Install terminals in different folders with different names, for example MT4Master1
MT4Master2 MT4Master3 and 1 client MT4Client1
2. All terminal shortcuts must be run as administrator !!!
3. In the archive you will find separate files Copier Master and Copier Client
four. You must install COPYLOT MASTER in the terminal folders from which transactions
will be copied
five. You must install COPYLOT CLIENT in the terminal folders where transactions will be
copied
6. On the terminal of the Master, open a chart of any currency pair - separate from
other charts, TF and PAIR are not important. For example EURUSD On the master
7. terminal chart, run COPYLOT MASTER
eight. In the pathWrite field of the terminal master, specify a separate data file, for
example: copylot1
nine. We launch the Client terminals and open the chart on each terminal.
10. For each chart, set COPYLOT CLIENT and in the pathRead field, indicate-
we put our data files copylot1
eleven. Required in all advisors, you must check the box "Allow
advisor to trade "
12. Turn on the ADVISORS button and our deal copier will start copying
instantly to your client's account.
four. If you are not sure about the purpose of a particular function - send your question
via the return form on the website:
http://www.expforex.com/index/exp_copylot_v1_programma/0-187
five. Do not transfer the copier to third parties, in order to avoid copying errors on the
eight.The copier uses the chart where it is installed, so do not overlay other indicators and
scripts on the chart where the copier is installed
nine. Before installing the new version - wait until all transactions are closed on the wizard
Client expert:
Parameter Description
The path to the file, which will store information about the current
pathREAD
positions - orders (Do not change without experience)
The magic number for opening / closing (Do not change without
Magic experience) is intended for using the system on several master
terminals, as well as for identifying the positions of the system.
ChangingNamesSymbols
If your master and client of the terminal do not have the same currency names,
Parameter Description
however, PreFixSymbol also does not solve this problem, you can
write a list of substitute names.
eg:
- USA500b (SP500)
is FDAX-GER30b (DAX)
LIFE HACK: You can also replace symbols, for example, when opening a
deal on the master for the EURUSD symbol, open the same deal on the
client on GBPUSD
EURUSD = USDJPY;
Show the table of copied trades on the chart where the copier is
ComentShow
installed
otherwise, you can put a lot, which will be opened when transferring
Lot deals
If this value is not empty, then it does not matter what value will be on the
master,
RiskLotTypetype
Risk calculation type for the RiskLot option, three modes are available:
For example KoefLot = 0.1, on the master lot = 1 - on the client 1 * 0.1 = 0.1
eg
The difference in the open price is 0.0500 points, while the distance
to Stop Loss and Take Profit are adjusted.
Default: Off
True - for UMC brokers and accounts in which it is prohibited to place stops
at the same time as opening a position.
MarketWatch
If your account is in the ECN or NDD group, you must set the option
to true
ReverseCopy Example:
Master - buy
Client - sell
ReverseSLTP = true
When copying and reversing a deal from the master, the stop loss /
take profit is also reversed on the client
eg:
on the SELL master with stop loss = 100 points, take profit = 300 points. The following is
copied to the client: BUY with a stop loss of 300 points and a take profit = 100 points.
ReverseSLTP = false
Parameter Description
When copying and reversing a deal from the master, the stop loss / take
profit is not reversed on the client, but is set with the size of the stops on the
master
eg:
on the SELL master with stop loss = 100 points, take profit = 300 points. The following is
copied to the client: BUY with a stop loss of 100 points and a take profit = 300 points.
Price deviation during copying, for example, if you put 100, then the
PricePointSlip position will be copied only if the client's price does not differ from
the master by more than 100 points. 0 - unlimited.
Rounding
Rounding:
ProfitCopyOnly Copy only profitable positions. With the Master of the account will be
Parameter Description
The profit value in points of the transaction is the minimum at which the transaction
will be copied, for example +20 points - the transaction is copied when the profit is
OnlyProfitPips greater than or equal to 20 points
The value of the loss in points of the deal, Below which the deal will be
copied, for example - 10 points, If the deal falls below the value of -10
points, the deal will be copied. The parameter must be set with the <–>
OnlyLossPips sign
Copy only new deals, It means that only those deals that were opened after
the start of the Client part of the program are copied. All deals that were
NewTradeONLY
opened before the start of the program - will not be taken into account and
will not be copied
FilterLotMax lot
This is the addition (if the sign is "-", then a decrease) of the specified number
of points for the TakeProfit of the Client Terminal in comparison with the
Master (for the Reverse it is vice versa). This is useful for reducing losses and
TP_adjust for earning extra. points of profit when off.
ClosePosbyMaster = false.
Set in points
This is an addition (if the sign is "-", then a decrease) of the specified number of
points for Stoploss of the Client Terminal in comparison with the Master (for
SL_adjust Reverse it is vice versa). This is useful for reducing losses and for earning extra.
points of profit when off. ClosePosbyMaster = false.
Set in points
Parameter Description
PendingPrice_adjust
eg:
a pending order BUYSTOP is opened on the master at the price of 1.12400 and
SELLSTOP at the price of 1.12300
PendingPrice_adjust = 200
The ability to set your stop loss on deals from the current open
My_STOPLOSS price, while if you disable ClosePosbyMaster = false, deals will
work at their stop loss / take profit
The ability to set your own take profit on deals from the current
My_TAKEPROFIT opening price, while if you disable ClosePosbyMaster = fakse,
deals will work at their stop loss / take profit
Virtual stop loss and take profit from the master, on the client's position
VirtualStopLossTakeProfit are placed without stops, I work with virtual stops that are not visible
to the server.!
TrailingStopUSE Use Trailing stop for open positions Only for profitable
TrailingStep
BeZubitok True - enable breakeven! Copying stops and takes is disabled when the
For example: You want only 2 positions for 1 currency pair out of 10 open
positions on the master to be copied to the client. Then, when the
parameter is set to 2, only the first two positions of each pair will be copied
from the master. Serves to reduce the load on the deposit. If the position is
closed, then the next position is copied from the master.
Parameter Description
MaxSymboll For example: You want only 2 currency pairs out of 10 possible on
the master to be copied to the client. Then, when the parameter is
set to 2, only the first two currency pairs will be copied from the
master. Serves to reduce the load on the deposit.
For example: On the wizard, the advisor opens several positions after
a certain time. You want to open positions on the client only then.
When 3 positions are opened on the master for a given currency pair
NumberPosbeforeCopy
and direction. In this case, set this parameter to 3. After the 3rd
position is opened on the master, all 3 positions will be copied to the
client
at the same time.
Master expert:
Parameter Description
The path to the file, which will store information about the current positions
pathWrite
- orders (Do not change without experience)
SymbolNOtToCopy Copy prohibition symbol. The symbol that does not need to be copied,
empty value - all symbols, listing separated by commas strictly with the
name of the symbol if you leave the field empty - will be copied
Parameter Description
Copy type
- 1 = all
ComentShow Show on the chart a table with current deals for copying
Trades will be copied only in the range from 14:00 to 18:35, the rest
of the time, the advisor will skip signals from your strategy.
STOPbyDD and This parameter prohibits copying trades from the master if the drawdown
PercentDDMAX on the master account is PercentDDMAX percent or more. This option is
useful for stopping the copying of trades if the account goes into a large
drawdown
When the drawdown on the master account is 10 percent or more -
Parameter Description
the copier will stop copying new trades to the client's account
Reverse effect for copying. The copier starts copying trades when the
drawdown on the master's account exceeds the value set by
PercentDDMIN as a percentage. This option is useful when the averager is
StartbyDD and
working on the master account or when using reverse
PercentDDMIN
When the drawdown on the master account is 10 percent or more, the copier
will start the copying process and copy all transactions from the master
account
If the Profit of the deposit by the master has exceeded the mark
STOPbyOP and
PercentOPMIN percent - Copying stops.
PercentOPMIN
PercentOPMIN = 1
Question answer
What terminal is the copier intended for:
Copier for MT4 terminal !!! for the MT5 terminal - some functions do not work, so I am
not selling it yet.
The speed depends on your broker. My copier copies the trades table 3 times per second! This
means that the table of positions is synchronized every 300-500 ms, and immediately sends a
request to your broker's server, all other delays depend on your broker.
Yes, I do not sell a pig in a poke, Any of my products can be downloaded for free on my website in
the section
Development: http://www.expforex.com/index/razrabotki_www_expforex_com/0-209
You can, There are several lot functions at your disposal, including: Coefficient,
Autolot ...
I guarantee that our copier has passed many years of reliability tests. Our
copier is over 7 years old.
Yes, all updates are free. If YOU buy a copier through the mql5 market - all further updates
are free
Depends on your computer. My copier does not take up much of your computer's memory.
On average, using AMD 4 core processor, 12 GB of RAM Windows7 64 I can run 21
terminals with copier installed.
No, my copier only works on the local computer where the copier is installed.
Is it possible to open deals on my computer, and copying will take place via
the Internet on a VPS
Yes. You can set up a scheme in which you will work on your terminal, and
transactions will be copied on your VPS to all other terminals.