Professional Documents
Culture Documents
Sizes: S, M, L
www.fine-motor-skills.blogspot.ca
WHAT YOU WILL NEED
TOOLS SUPPLIES
• fabric shears • main fabric
• pins • thread
• marking pen or chalk
• pattern weights (or books, plates,
bricks etc)
RECOMMENDED FABRIC S M L
NOTES
• pre-wash fabrics to prevent shrinkage and remove sizing
• using a 4-thread overlock stitch for all seams is best but a zigzag or double needle
will also work
This sewing pattern by Fine Motor Skills is licensed under a Creative Commons Attribution-Noncommercial-
Share Alike 2.5 Canada License. For further info: http://creativecommons.org/licenses/by-nc-sa/2.5/ca/
1
CUTTING LAYOUT for 115 cm/45”
SELVEDGE
L
L
M
M
S
S
L
S
S
M
L
S
M
M
L
M
L
S
L
L
A
STRAIGHT GRAIN
L
M
S
REVERSE PATTERN
STRAIGHT GRAIN
STRAIGT GRAIN
L
M
S
L
S
M
L
L
M
M
S
L
S
S
L
M
S
S
M
S
S
S
L
M
L
L
L
SELVEDGE
FOLD
L
M
S
STRAP
L
M
S
L
M
S
L
M
S
SELVEDGE
STRAIGHT GRAIN
M
S
CF
SELVEDGE
2
CUTTING LAYOUT for 150/60”
FOLD
L
L
M
M
M
S
S
S
S
L
S
S
M
L
S
M
M
L
M
L
S
L
L
A
STRAIGHT GRAIN
STRAIGT GRAIN
B S
M
L
SELVEDGES
FOLD
L
M
S
STRAP
L
M
S
L
M
S
L
M
S
SELVEDGE
STRAIGHT GRAIN
M
S
CF
SELVEDGE
3
you can do it
GETTING STARTED
• Cut out each rectangle containing the pattern and match up the number/letters
as shown in the paper layout diagram.
• Use weights to hold your pattern pieces in place, pins may pull fabric and alter fit.
• Trace your pattern with a marker pen or chalk. Mark notches with a small mark
within your seam allowance. Mark center fronts and backs.
• Cut out your pattern pieces cutting off your tracing lines.
4
CUTTING OUT YOUR STRAPS
3. Use the Pleat Guide to mark pleats and center front on one end of
each strap. Remember to reverse the guide to mark a left and right
side strap.
5
INSTRUCTIONS
STITCH THE INSEAMS OF THE SHORT
1.
With right sides together over-
lock stitch front inseam to back
inseam.
1.
With right sides together over-
lock stitch the crotch seam
matching center fronts and
center backs.
6
BASTE FRONT STRAP PLEATS
1.
Fold 1 cm (3/8”) of the long
edges to the wrong side and
pin.
2.
Matching notches, pin the
pleats toward the sideseam.
3.
Baste turned edges and pleats
in place within the seam allow-
ance.
1.
With right sides together over-
lock stitch short sides of waist-
band (B).
B
2.
With wrong sides together fold
waistband in half along its width
and press.
7
STITCH STRAPS AND WAISTBAND TO SHORTS
1.
Pin straps to waist of shorts.
Match center front strap
notches to front seam of shorts.
Straps will overlap 3 cm. Align
edge of strap at side waist to
notch. Baste straps to shorts
within seam allowance.
2.
Pin the waistband to waist of
short overtop of the front straps.
Place waistband seam at
center front.
3.
Overlock stitch thru all layers.
8
TEST SQUARE
10 X 10 CM
TEST SQUARE
the alayne romper
PAPER LAYOUT
7E 7E
7C 7C the alayne romper 7D 7D
7E 7E
10 X 10 CM
C
TEST SQUARE
6C 6D 6E 6F
5A 5A FRONT STRAP MEASUREMENTS (cm)
5C 5C
small 29 x 180
S M L
B M large 34 x 200
WAIST BAND
L
STRAIGT GRAIN
1 X SELF
L M S L M S L M S L M S CF
L M S
L M S
5E 5E 5F 5F
L
M
5D 5D
L
S
S
5B 5B
S
M
L
L
S
4A 4B 4C 4D 4E 4F 4G
L
10 X 10 CM
SM
S
L
M
M
4A 4B 4C 4D 4E 4F 4G
L
3D 3D
L
S
3C 3C
M
3A 3A
L
1 cm (3/8) SEAM ALLOWANCE
3E 3E
ALAYNE ROMPER
C
2 X SELF
3B 3B
3G 3G
M
TEST SQUARE
S
3F 3F
SHORT
301-13
A
STRAIGHT GRAIN
2A 2B 2C 2D 2E 2F 2G 2H
2A 2B 2C 2D 2E 2F 2G 2H
1A 1A
1G 1G
1B 1B
1F 1F
1C 1C 1E 1E
6C 6D 6E 6F
5A 5A FRONT STRAP MEASUREMENTS (cm)
5C 5C
small 29 x 180
S M L
B M large 34 x 200
WAIST BAND
L
STRAIGT GRAIN
1 X SELF
L M S L M S L M S L M S CF
L M S
L M S
5E 5E 5F 5F
L
M
5D 5D
L
S
S
5B 5B
S
M
L
L
S
4A 4B 4C 4D 4E 4F 4G
S
L
M
S
S
M
L
M
M
4A 4B 4C 4D 4E 4F 4G
L
3D 3D
L
S
3C 3C
L
3A 3A
1 cm (3/8) SEAM ALLOWANCE
3E 3E
ALAYNE ROMPER
2 X SELF
3B 3B
3G 3G
M
S
3F 3F
301-13
SHORT
A
STRAIGHT GRAIN
2A 2B 2C 2D 2E 2F 2G 2H
2A 2B 2C 2D 2E 2F 2G 2H
1D 1D
1A 1A
1G 1G
1B 1B
1F 1F
1C 1C 1E 1E