Professional Documents
Culture Documents
AVM-3259G: Color TV Owner's Manual Color TV Manual Del Propietario
AVM-3259G: Color TV Owner's Manual Color TV Manual Del Propietario
CONTENTS
Important Safety Tips . . . . . . . . . . . . . . . . . . . . 2
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . 3 AS
Basic Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Basic Hookup Methods . . . . . . . . . . . . . . . . . . . 4
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 AS
ESPAÑOL . . . . . . . . . . . . . . . . . . . . . . . . 20 ~ 39 Printed in U.S.A. SMC, September 2001/Impreso en U.S.A. SMC, Septiembre 2001
Contenido . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Part No. / No. de Parte : 1AA6P1P2589 A –
Service Code/Código de Servicio : 610 289 2949
CAUTION THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING
A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT.
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING
BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED AND MAINTENANCE INSTRUCTIONS IN THE LITERATURE ACCOMPANY-
SERVICE PERSONNEL. ING THIS UNIT.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
2
FEATURES SPECIFICATIONS
◆ Trilingual On-Screen Menu ◆ Sleep Timer (3 hours) PICTURE TUBE SIZE
◆ Automatic Channel Search ◆ TV Reset (Measured Diagonally) . . . . . . . . . . 32-inch screen
◆ Auto Shut Off PICTURE RESOLUTION . . . . . . . . . 330 Lines
181 Channel Tuning System
◆ Closed-Captioning/QuikCap VHF Channels 2-13 . . . . . . . . . . . . . . . . . . . . . . . . . . . Video Input 600 Lines
◆ Comb Filter UHF Channels 14-69 ANTENNA INPUT . . . . . . . . . . . . . . UHF/VHF/CATV 75Ω
◆ Digital picture controls Cable TV (CATV) 1, 14-125
with on-screen display POWER REQUIREMENT . . . . . . . . . 120VAC 60Hz
Automatic Fine Tuning
◆ MTS stereo/dbx ®/SAP POWER . . . . . . . . . . . . . . . . . . . . . 89 watts
VHF and Cable Channels
Decoder HORIZONTAL DIM. (Width) . . . . . . . 30.0 in. (762mm)
◆ Color Enhancer Remote Control
◆ Auto Flesh Tone Multimedia/Universal VERTICAL DIM. (Height) . . . . . . . . 27.8 in. (707mm)
◆ XDS (Extended data service) VCR/TV/AUX DEPTH DIM. (Thickness) . . . . . . . 21.2 in. (538mm)
station call letters, title of Large Glow-in-the-Dark basic
show, ratings operating keys WEIGHT (Approx.) . . . . . . . . . . . . . 108.6 lbs. (49.3 Kg.)
◆ Factory preset adjustments Numbered Channel SOUND . . . . . . . . . . . . . . . . . . . 2 Speakers, Size 10 cm
for picture/sound Selection AMPLIFIER . . . . . . . . . . . . . . . . . . Built-in with 3.0W
◆ Initial Channel Channel Scanning
◆ Bass/Treble Volume Mute A/V INPUT JACKS . . . . . . . . . . . . . Video Input and Audio Input
◆ Audio/ Video Input Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . (2 sets-R/L), S-Video Input
Power Recall
(2 sets-R/L)
Display Sleep AUDIO OUTPUT JACKS . . . . . . . . . Audio Output (R/L-Fixed)
◆ S-Video Input Jack
Caption Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . (RCA Connectors)
◆ Audio Output Jacks
Menu V-Guide
(Fixed levels) VCR keys Input
◆ V-Guide (Parental Control)
◆ Clock CAUTION: FCC Regulations state that improper modifications or
dbx® is a registered trademark of unauthorized changes to this unit may void the user’s
Carillon Electronics Corporation authority to operate the unit.
❺ quality.
VCR
TV
➊
INP
AUX
UT POWE
R VOLUME + POWER
RESE MENU +
1
T
MENU
CAP
7
TION
4
8
5
2
6
3
+
■ The TV will automati-
9
VOL
MENU
CH
0
REC
ALL
VOL
SLE
EP
PLA
Y
DISPL Please wait Antenna mode for the
REC
STO
P
TV is searching
type of signal you
V-G PAU
UID SE
E
L
no signal reception OUT AUDIO
VIDEO R
not broadcasting).
Exception—When the
Video mode is selected,
the TV will not auto- ➊b Cable with Cable Box, VCR and TV
matically switch off TV BACK
VCR
when signal reception CABLE BOX
❷
UHF/VHF/CATV S-VIDEO IN -1
❸
75Ω
has stopped for 15 IN
AUDIO AUDIO
minutes. FROM ANT. VIDEO
INPUT
(MONO)
R AUDIO L VIDEO
OUTPUT
1 L
IN OUT OUT
AUDIO
OUT TO TV. VIDEO R
INPUT R AUDIO L VIDEO
2 (MONO)
❷
AUDIO (MONO) OUTPUT
VIDEO R AUDIO L VIDEO
IN INPUT
1 L
FROM ANT.
AUDIO
+ +
VIDEO R
OUT INPUT
2
R AUDIO L
(MONO)
VIDEO
OUT TO TV.
❷
75 OHM Terminal UHF/VHF/CATV
75Ω
S-VIDEO IN -1
TV BACK ❸
Use the 75 ohm terminal to AUDIO
AUDIO
connect a VCR, cable, cable box, VIDEO
INPUT
(MONO)
R AUDIO L VIDEO
OUTPUT
to the TV.
4
REAR PANEL QuickTips
■ Make sure all cable
Cable / Antenna Input S-Video (Super-Video) In-1 Terminal connectors are fully
Terminal (75 ohms) To enhance video detail use the seated on jacks.
S-Video In-1 jack instead of the A/V1
See pages 11 and 12
Video jack, if available on your exter-
nal video equipment. (S-Video 1 before connecting
connection will override a Video1 external audio/video
UHF/VHF/CATV
75Ω S-VIDEO IN -1 connection.) equipment.
■ Cables are not
AUDIO AUDIO supplied for connect-
VIDEO (MONO) OUTPUT
INPUT R AUDIO L VIDEO ing your external
1 equipment.
L Audio Output Jacks (Fixed)
Connect external audio
AUDIO ■ A solid Blue screen
VIDEO
R equipment here (see page 11).
INPUT with the word Video1
R AUDIO L VIDEO
2 (MONO) or Video2 displayed
means that the Video
Audio / Video Input Jacks (A/V1)
mode is selected, but
Connect external video equipment Audio / Video Input Jacks (A/V2) no signal is being
here (see pages 12). Connect other external video equip- detected at the
ment here (see pages 12).
Video jack. Check
connection, and
turn on external
equipment.
■ Be sure batteries are
installed correctly.
■ Point the remote
MULTIMEDIA REMOTE CONTROL control toward the
equipment you want
Operates your TV, VCR, DVD, and Cable converter box. To familiarize yourself with this to operate. Objects
remote control, see page 6. To program the remote control, see pages 7~8. between the remote
control and the
equipment may cause
INSTALLING BATTERIES (2 AA not included)
misoperation of the
1. Remove the battery cover by pressing the tab and tilting remote control
the cover upward. Insert batteries. Make sure you match function.
+ / signs on the batteries with marks inside the
remote control.
2. Replace battery cover. The remote control is ready!
Notes:
– Do not mix old batteries with new ones or mix
different types of batteries together.
– Remove the batteries if the remote control will not be
IMPORTANT NOTE: Spent or discharged batteries must be recycled or
used for a month or more. Weak batteries may leak and
disposed of properly in compliance with all applicable laws. For detailed
cause damage. information, contact your local County Solid Waste Authority.
5
MULTIMEDIA REMOTE CONTROL KEYS
QuickTips
Point towards TV
➠
■ Point the remote
control toward the
➄ Menu Key
Use this key with the / and
equipment you want to
operate. Objects ➀ VCR TV AUX / keys to navigate and adjust
features of the on-screen menu system
between the remote POWER RESET (see pages 9 ~ 10).
➁
INPUT
and the equipment
may cause misopera- ➉ ➅Channel (CH) Scanning ( / )
tion of the remote and Volume ( / ) Keys
control function.
1 2 3 11
Press to scan through the channels in
■ Make sure batteries ➂ 4 5 6 memory and to adjust the volume.
have been installed
correctly. 7 8 9 ➆ Mute Key
Press once to turn off the volume.
CAPTION SLEEP
■ If the remote control
does not work: Press
➃ MENU
0
RECALL
12 Press again to restore.
Note: When using the audio out jacks
TV key (see item 1). ➄ VOL
CH
VOL
13 this key will not mute the sound.
■ The remote control
must be programmed
➅ ➇ VCR/DVD Keys
These keys control VCR and/or DVD
before it will operate
your VCR, DVD, or functions for Fast Forward ( ),
➆
MUTE DISPLAY
Cable Box. See 14 Rewind ( ), Play ( ), Record
pages 7~8. PLAY ( ), Stop ( ), and Pause ( )
functions.
■ Cannot select channel
with number keys.
➇ REC STOP PAUSE
6
PROGRAMMING THE MULTIMEDIA REMOTE CONTROL
QuickTips
Find your code. It is next to the brand name ❸ Press the POWER and CHANNEL keys
of your equipment in the chart below and to check programming. If they operate
on page 8. (The illustrated example is for a properly, programming is completed. If
■ Make sure batteries
Sanyo VCR.) not, use another code, if available and have been installed
correctly.
➊ Press and hold VCR or AUX key. repeat steps.
■ The remote control will
Notes:
Press button VCR TV AUX
– There may be VCRs, DVD’s, and cable not operate my VCR,
and hold down. POWER RESET
INPUT boxes that this remote control cannot DVD, or Cable Box.
operate. – Press the VCR
❷ Using the NUMBER keys on the – Some manufacturers use different types or AUX key.
remote, enter the three-digit code of remote controls. If your brand has – Reprogram the
number for your VCR, DVD, or Cable several codes listed, repeat steps ❶ and remote control.
Box. The key will flash 5 times when ❷ with each number until you find the
released if the code was accepted. correct code. Write your codes in the
■ Special key functions:
1 2 3 spaces on back of remote control and The INPUT key func-
Enter Code:
page 8 for quick reference. tions as the VCR’s
Example: For a 4 5 6
Sanyo VCR, Enter TV/VCR key when the
7 8 9
code “200” (from CAPTION SLEEP To Operate Your... Remote Control is in the
chart below). 0
MENU RECALL VCR—Press the VCR key. VCR mode.
CH
Cable Box—Press the AUX key. ■ The AUX mode will
VCR ..............CODE
DVD Player—Press the AUX key. accept codes for DVDs,
SANYO ..............200,201,202,203
SCOTT................
Television—Press the TV key. Cable boxes, or a VCR,
but only one at a time.
VCR Codes Chart
BRAND NAME CODE NO. BRAND NAME ......... CODE NO. BRAND NAME ......... CODE NO.
ADMIRAL ................... 234,239,243,247,224,229,222,215 HUGHES...................... 221 QUARTZ ...................... 200
ADVENTURA ............... 228 JBL ............................. 237 QUASAR ..................... 245,232,236,223,216
AIKO............................ 240,205 JENSEN....................... 209 RADIO SHACK ............ 228,245,223
AIWA .......................... 228,217 JVC ............................ 220,225,238,226,203,209,221 RCA ............................ 221,241,246,230,232,236,239,224
AKAI ........................... 209,215 KEC ............................. 240,205 ................................... 226,229,221,201,207,208,210,216
AMERICA ACTION....... 205 KENWOOD ................. 226,238,220,201,203,209 REALISTIC ................. 232,239,223,224,228,229,200,201
AMERICA HIGH ........... 232 KODAK ........................ 232 ................................... 202,203,206,208,216,217,245
BELL & HOWELL ....... 203 LLOYD’S...................... 228 SAMSUNG .................. 208,233,211,217,222
BROKSONIC ............... 234,243,247,227,204 LOGIK ........................ 235,219 SANKY ........................ 239,229,224
CANDLE ..................... 233,240,222,223,204,205,208 LXI ............................. 232,221,228,201,202,203,206 SANSUI ...................... 243,226,228,209,219,220
................................... 211,216,217 ................................... 211,217 SANYO ....................... 200,201,202,203
CANON ....................... 232,216 MAGNASONIC............. 223,240,205,219 SCOTT ........................ 234,247,223,227,211
CCE ............................. 240,205 MAGNAVOX ............... 204,232,228,211,216,217,219,220 SEARS ........................ 232,223,228,221,200,201
CINERAL ..................... 240,205 MARTA........................ 206 , ................................. 202,203,206,211,216,217
CITIZEN ...................... 233,240,222,205,211,216,217 MATSUSHITA ............. 232,216 SEMP .......................... 211
CRAIG ........................ 223,202,219 MEI.............................. 232 SHARP ....................... 239,229,224
CRAVER ...................... 204 MEMOREX ................. 232,239,243,245,223,224,228, SHINTOM ................... 219,227
CURTIS MATHES ....... 232,236,238,222,228,208,209 ................................... 229,221,200,202,203,206,215 SIGNATURE ............... 217,239,229,224,200
................................... 211,216,217 MINOLTA .................... 221 SONY ......................... 214,218,232,237,226,228
DAEWOO .................... 205,240,211 MITSUBISHI ............... 231,239,244,224,226,229,210,223 STS ............................. 221
DAYTRON.................... 240,205 MOTOROLA................. 232,239,229,224 SYLVANIA .................. 228,232,244,204,216,217
DENON ........................ 221 MTC ........................... 228,217,219 SYMPHONIC .............. 217,228,233,226,202
DYNATECH ................. 228 MULTITECH ............... 228,217 TATUNG ..................... 226,209
EMEREX ...................... 214 NEC ............................ 238,208,223,226,203,206,209 TEAC .......................... 228,209,214,217
EMERSON .................. 234,236,240,243,247,223,227,228 ................................... 215,217 TECHNICS ................... 232
................................... 203,204,205,206,210,211,217 OLYMPUS ................... 232 TEKNIKA .................... 232,223,228,216,217
FISHER ....................... 200,201,202,203,211 OPRIMUS.................... 239,245,248,223,224,229,203,208 TOMAS ....................... 228,217
FUJI............................. 232 ORION ........................ 243,227,234,205,206,210,211,240 TOSHIBA .................... 211,240,244,202,205,210
FUNAI ......................... 228,233,217 PANASONIC ............... 245,232,236,223,202,211,216,219 VECTOR ...................... 211
GARRARD ................... 228 PENNY ........................ 230,232,221,223,208,211,216,219 VIDEO CONCEPT......... 211
GE .............................. 222,246,232,236,239,226 PENTAX ...................... 238,221 WARDS ...................... 230,232,239,223,224,228,229
................................... 229,224,208,212,216 PHILCO ...................... 204,232,243,228,216,217 ................................... 221,202,204,208,211,217
GOLDSTAR ................ 223,238,226,206,208,215,217 PHILIPS ..................... 204,232,211,216,217,228 WHITE
GO VIDEO .................. 248,249,208,212,219 PIONEER .................... 242,204,207,220 WESTINGHOUSE ......... 240,243,205
GRADIENTE................. 228 PROSCAN .................. 222,241,246,230,236,226 XR-1000...................... 228,232
HARLEY DAVIDSON.... 228 PROTON ..................... 219 YAMAHA .................... 238,226
HEADQUARTER........... 200 PULSAR ..................... 233,240,205, 208,216,217 ZENITH ....................... 215,237,243,223,225,228,222
HITACHI ..................... 230,246,226,228,221,222,209,217 QUARTER.................... 200
7
Cable Converter Box Codes Chart DVD PLAYER Codes Chart
BRAND NAME ......CODE NO. BRAND NAME ...... CODE NO. BRAND NAME .......... CODE NO. BRAND NAME .......... CODE NO.
ABC ...................... 304,306,309 PHILIPS ................ 325,329,301 APEX .......................... 523 PHILIPS ...................... 508,502
............................ 312, 313,314, ............................ 313,314,322 DENON ........................ 501,520 PIONEER .................... 511,505,518
............................ 318,321,322,324 PIONEER .............. 333,312,317
EMERSON .................. 521 PROSCAN.................... 504
AIM ...................... 321 PROSCAN ............ 327
ARCHER ................ 334 QUASAR ................ 302,307,317
FISHER........................ 500 RCA ............................ 504
BELL & HOWELL .. 313 RADIO SHACK........ 334 GE .............................. 504 SAMSUNG .................. 512
CONTEC ................ 302,305,307,308 RCA ...................... 328,302,307 HARMAN/KARDON...... 513 SANYO ........................ 500
............................ 311,318,320,324 REGAL .................. 330,307,320 JVC.............................. 510,515 SHARP ........................ 517
CPI ........................ 319 REMBRANT .......... 305,309 KENWOOD .................. 507 SHERWOOD ................ 519
DIAMOND ............ 320 SAMSUNG ............ 310,312 MAGNAVOX ................ 508,502 SONY .......................... 506
EAGLE .................. 313 SCIENTIFIC MARANTZ .................. 508 TECHNICS .................. 501
EMERSON .............. 334 ATLANTA ............ 327,307,324
MITSUBISHI................ 503 THETA DIGITAL .......... 511
GEMINI .................. 334 SIGNAL ................ 310
GENERAL SIGNATURE .......... 300,309,321,322
ONKYO ........................ 502,516 TOSHIBA .................... 502
OPTIMUS .................... 511 YAMAHA .................... 501,509
INSTRUMENTS .. 303,309,311,320 SPRUCER .............. 302,307,316
ORITRON .................... 522 ZENITH........................ 514,502
............................ 321,322,323,300 STARCOM ............ 332,309,311,321
GOLDSTAR ............ 312 ............................ 322,323 PANASONIC ................ 501,518
GOODMIND............ 334 STARGATE ............ 309,310,311,321
HAMLIN ................ 330,320 ............................ 322,334 Replacing Batteries
HITACHI ................ 309 TELEVIEW ............ 310
HYTEX.................... 318 TOCOM ................ 300,303,304,305 The programming code numbers will remain in memory
JERROLD .............. 303,308,309,311 ............................ 306,307 for 5 minutes as you replace the batteries.
............................ 313,319,320,321 TOSHIBA .............. 331,309,311
............................ 322,323,300 ............................ 316,322
MAGNAVOX .......... 325,329,301 UNIKA .................. 314
............................ 313,314,322 UNITED AIRTISTS.. 318 Record your
MEMOREX ............ 332,313,314 UNITED CABLE .... 309 VCR, Cable Box, VCR Code:
MOVIE TIME ........ 306,310,314 U.S.
NORTHCOAST ...... 316 ELECTRONICS .... 309,322,324
and DVD Player
NSC ...................... 305,306,314 VIEWSTAR ............ 326,313,315 codes for future Cable Box
OAK ...................... 305,318,320 WARDS ................ 321,322 reference. Code:
PANASONIC .......... 302,307,317 WARNER .............. 312
PARAGON ............ 313,314 ZENITH .................. 331,316,322,324
DVD Player
Code:
NUMBER KEYS (0 ~ 9) Used to Select Channels Used to Select Channels Used to Select Channels No Function
INPUT Selects TV/ Video mode Selects TV/ VCR mode Selects TV/Video mode Selects TV/ Video mode
RECALL Selects previous channel Selects previous channel No Function Select Repeat
CHANNEL (UP) Selects next channel up Selects next channel up Selects next channel up Next or Skip Forward
CHANNEL (DOWN) Selects next channel dn Selects next channel dn Selects next channel dn Previous or Skip Reverse
PLAY Selects VCR Play Mode Selects VCR Play Mode Selects VCR Play Mode Selects DVD Play Mode
FAST FORWARD Fast Forwards tape Fast Forwards tape Fast Forwards tape Fast Forwards disc
REWIND Rewinds tape Rewinds tape Rewinds tape Steps backward
STOP Selects VCR Stop Selects VCR Stop Selects VCR Stop Stops disc
PAUSE Selects VCR Pause Selects VCR Pause Selects VCR Pause Pause (still) disc
8
TV ADJUSTMENT AND SETUP QuickTips
The on-screen menu provides the viewer with easy access to adjustments and settings. Just ■ The menu will display
use the keys on the remote control and follow the instructions. on the screen for
approximately 20
HOW TO MAKE ADJUSTMENTS ▲▼ keys – + keys seconds. Press MENU
Clock 0:00
➧Stereo Mono SAP
again to redisplay.
1. Press MENU key. Audio
10
RESET TING THE TV QuickTips
Press the RESET key to automatically reset the television to factory settings. These
features will automatically reset: ■ Make sure all cable
connectors are fully
• Picture/Sound Adjustments: Color, Tint, Contrast, Brightness, Sharpness, Color
seated on jacks.
Enhancer, Bass, and Treble
• Channel Memory ■ Always match cables
Press RESET key according to the
• Audio to Stereo
colors; RED for right
• Initial Channel to OFF again to return
factory preset and audio and WHITE for
• Caption to OFF
begin channel search left audio.
• V-Guide to OFF
■ Position your TV at
• Language to English
least 2 feet from
• Clock and Sleep Timer (if previously set) stereo speakers.
If desired, personal settings can be made again The magnets in the
using the menu options. speakers may affect
the picture quality.
■ Do not connect
SETTING THE SLEEP TIMER external speakers
directly to the TV.
The Sleep Timer will switch off the TV automatically.
1. Press the SLEEP key.
VCR TV AUX Sleep : Clear
2. Use the 0 key to select the desired time
(from 30 minutes up to 3 hours). INPUT POWER RESET Sleep : 3:00
Sleep : 2:30
Note: The Sleep Timer cancels 1 2 3
Sleep : 2:00
when the TV is turned off 4 5 6
or if a power failure occurs. Sleep : 1:30
❷ 7
CAPTION
8
0
9
SLEEP
❶ Sleep : 1:00
MENU RECALL
Sleep :
➧ 0:30
Use 0 key
AUDIO
2. Press POWER to turn on the TV. Turn on
❷
R
VIDEO
INPUT R AUDIO L VIDEO
2 (MONO)
Stereo Amplifier
11
QuickTips USING THE AUDIO/ VIDEO INPUT JACKS
CONNECTING A VCR OR OTHER EXTERNAL EQUIPMENT
■ Make sure all cable
connectors are fully Switch off TV and external equipment before connecting cables. (Cables are not supplied.)
seated on jacks. 1. Connect VCR, DVD, DSS, or other equipment’s Audio Out (R/L) to the TV Audio
■ Always match cables Input (R/L) ❶.
according to the For Mono VCR (Single Audio Jack) connect VCR Audio Out to TV Audio (L) Input.
colors; RED for right
2. Connect VCR, DVD, or other equipment’s Video Out to the TV Video Input ❷.
audio, WHITE for left
audio and YELLOW for Optional
video.
Connect VCR, DVD, or other equipment’s S-Video Out to the TV S-Video In-1
■ A/V1 and A/V2 jacks Jack ➁.
have identical func-
Note: Using the S-Video In-1 jack overrides the Video 1 jack ➁.
tions. Any compatible
video equipment can 3. Press POWER ❸ to turn on the TV. Turn on external equipment also.
be connected to either
set of jacks. 4. Press the INPUT key ❹ to select program source: TV signal or signal from the
equipment you have connected to the A/V1 and A/V2 jacks.
■ A solid Blue screen
with the word Video1 Follow the same procedure to connect other compatible video equipment to the second set
of A/V jacks.
or Video2 displayed
means that the Video VCR TV AUX
mode is selected, but
no signal is being
❹ INPUT POWER RESET
detected at the
Video jack. Check
❸ Remote Control
connection, and
turn on external Back View of a VCR
➊
equipment. A/V JACKS
■ You may be able RF
IN
CHANNEL R- AUDIO -L VIDEO
to use the remote CH3 CH4
OUT
TV A/V Input
control to operate
your VCR, DVD,
Cable Box, and TV.
R- AUDIO -L VIDEO
Rear Jacks ❷
UHF/VHF/CATV
75Ω S-VIDEO IN -1
(See pages 7~8.)
AUDIO
➁
AUDIO
VIDEO (MONO) OUTPUT
INPUT R AUDIO L VIDEO
1
L
AUDIO
VIDEO R
INPUT R AUDIO L VIDEO
2 (MONO)
DVD Player
12
CLOSED-CAPTIONING QuickTips
Captioning is textual information transmitted along with the picture and sound so it can be
displayed on the TV screen. Because different types of captions can be transmitted with the
■ If Caption Text mode
TV signal, separate captioning modes are provided. The captioning modes recognized by
is selected and no
this model are: Caption1, Caption2, Text1, and Text2. Local broadcasters decide which
captioned text is
caption signals to transmit. They may not choose to provide captions or may provide
broadcasted, a black
captions in one or all of the available modes. box may appear and
remain on the TV
Caption1: This is the main mode used for program caption- screen.
ing (words match the program you are watching). Almost all
broadcasters will use Caption1 to transmit program captions.
These captions are generally one or two lines.
VOL
CH
RECALL
VOL
❷
MUTE DISPLAY
13
QuickTips V-GUIDE INFORMATION
NOTE: THIS FEATURE IS DESIGNED TO COMPLY WITH THE UNITED STATES OF
■ Use the CHANNEL AMERICA’S FCC V-CHIP REGULATIONS. THEREFORE, IT MAY NOT FUNC-
/ keys and TION WITH BROADCASTS THAT ORIGINATE IN OTHER COUNTRIES.
the VOLUME / With the introduction of “V-Chip” technology, it is now possible for Sanyo tele-
keys to navigate visions to interpret MPAA and TV Parental Guidelines rating codes. When these
through the menus codes are detected, the TV will automatically display or block the program, V
v
INP
depending upon choices you make when setting up the V-Guide system.
UT
TV
PO
1
W
4
ER
AU
2
X
7
CAP
RE
5
SE
TIO
ME
T
N
3
NU
VO
6
-L
CH
9
SL
MU
EEP
TE
RE
SET
+ VO
RE
PL
C
V-G
L
AY
UID
ST
DIS
PIP
tions from the menus.
OP
E
PLA
ON/
Y
SW
OFF
PA
AP
US
QU
LO
E
ICK
CA
TIO
FR
N
EEZ
SE
E
LEC
T
ABOUT MPAA AND TV PARENTAL GUIDELINES
■ V-Guide feature is
accessible only from MPAA and TV Parental Guidelines are rating systems that provide advance cautionary infor-
the remote control. mation to parents about the content of movie and television programming.
■ The TV guidelines MPAA is a voluntary rating system used by the movie industry. TV Parental Guidelines are
rating icon will modeled after the MPAA ratings and were designed to be simple to use, easy to understand,
generally appear in and easy to find.
the upper left hand TV Parental Guidelines contain both age-based and content-based information. This gives
corner of your TV parents discretionary ways of choosing appropriate material for their children to view.
screen. Content ratings are represented by the initials D (Suggestive Dialog), L (Adult Language),
■ The V-Guide display S (Sexual Situations), V (Violence), and FV (Fantasy Violence). When programming con-
remains on screen for tains any or all of these conditions, these letters become part of the icon that is displayed on
approximately 20 the TV screen.
seconds. If it A rating icon will generally appear in the upper left hand corner of the TV screen for fifteen
disappears, press seconds at the beginning of a program and should be repeated at the beginning of the second
the V-GUIDE key. hour of a long program. It may also appear when returning from commercials. There may be
other instances when these icons will be displayed as well. Parents are encouraged to become
familiar with these icons and their meanings.
WHERE CAN I FIND ADVANCE NOTICE OF PROGRAM RATING
Publishers of programming guides have been asked to include these ratings along with other
information they publish. You can expect to find this information in newspapers, magazines, and C 34
on-screen listings and guides. 10:00
TYPES OF PROGRAMS TO RECEIVE RATING XYZ
TITLE: THE SHOW
The TV Parental Guidelines will apply to various types of TV programming, including: Rating: TVPG-V
specials, mini-series, and movies. Sports and news shows do not currently carry guidelines.
V-GUIDE OPERATION
Use this feature to supervise television viewing for young children. This television can be set to automatically block pro-
grams with content you deem as inappropriate for your children to view, including: suggestive dialog, adult language,
sexual situations, violence, and fantasy violence.
The ability of the television to block the reception of specific programming content depends upon several conditions:
1) The program must be rated, 2) Networks must broadcast the rating code data, 3) Cable companies must transmit the
rating code signal, and 4) The TV must be properly setup to decode the signal.
The TV guidelines rating icon will generally appear at the upper left hand corner of your TV screen.
14
SETTING MPAA MOVIE RATING
1. Press the V-GUIDE key on the remote control to display menu.
QuickTips
2. Press the key to switch V-Guide ON.
V-GUIDE X B ■ The TV will automati-
3. Press the key again. Then use the NC17 B
MPAA Movie Ratings ➡ R B cally block (B) ratings
/ key to highlight rating.
TV Parental Guidelines PG13 U above or unblock (U)
4. Press the MENU key to Block (B) or PG U ratings below selec-
Unblock (U) selected rating. (➡ Arrow G U
tion. For example, if
Press MENU key to BLOCK
indicates selection.) Use ▲▼, – + keys to select you block rating R,
5. Press the key to return to the Press V-GUIDE key to exit NC17 and X will be
V-Guide Options menu. blocked as well.
■ Blocking TVY7
SETTING AGE-BASED GUIDELINES does not block higher
6. Use the / keys to highlight TV ratings.
V-GUIDE TVMA B
Parental Guidelines. You can block a
TV14 B ■
MPAA Movie Ratings TVPG B
7. Press the key. Then use the content rating such
TV Parental Guidelines ➡ T V- G B as TVPG-V and
/ key to highlight rating.
TVY7 U
8. Press the MENU key to Block (B) or TV-Y U
still be able to watch
Unblock (U) selected rating. Content TVPG programs with
(➡ Arrow indicates selection.) Press MENU key to BLOCK ratings of S-L-D
Use ▲▼, – + keys to select provided TVPG is
SETTING CONTENT-BASED Press V-GUIDE key to exit unblocked (U).
GUIDELINES ■ To view Blocked (B)
9. Follow steps 6 and 7. Use the / programs, set
keys to highlight Content. V-GUIDE to OFF, or
press the RESET key
10. Press the MENU key to display the Content V-GUIDE TVMA B
TV14 B twice to clear all
Option menu. Blocked (B) ratings
MPAA Movie Ratings TVPG B
11. Use the / key to highlight a TV Parental Guidelines TV-G B and customized
category (D-Suggestive Dialog, L-Adult TVY7 U settings.
TV-Y U
Language, S-Sexual Situation, V-Violence, ➡Content ■ When in the V-Guide
FV-Fantasy Violence). Press MENU key to set menu system, the
12. Press the key. Then use the / Use ▲▼, – + keys to select / keys allows
Press V-GUIDE key to exit you to navigate
key to highlight a rating.
between the ratings
13. Press the MENU key to Block (B) or and the options menu.
Unblock (U) selected rating. (➡ Arrow
indicates selection.) D-Suggestive Dialog
14. Press the V-GUIDE key to exit; or press the L-Adult Language
key to return to the Content Options menu. S-Sexual Situations ➡T
TV14 B
V-Violence TVPG B
15. Repeat steps 11 through 13 to Block (B) or Note: Networks and local
FV-Fantasy Violence
Unblock (U) additional content ratings, if stations may or may
Press MENU key to BLOCK not include the
desired. Use ▲▼, – + keys to select
Press V-GUIDE key to exit
content ratings
TURNING OFF THE V-GUIDE portion of the TV
1. Press the V-GUIDE key. Parental Guidelines.
2. Use the / keys to select OFF.
15
TROUBLESHOOTING
Before calling for assistance, please look for the condition that most closely resembles your problem
in the following charts, then follow the instructions for that condition. Visit our web site at
www.sanyoctv.com.
16
No Captioning
Is the program Yes. Set captioning on. Press the Caption key then press the 0 key to highlight Caption1.
you are watching No. Tune to a channel that is broadcasting a closed-captioned program.
closed-captioned?
17
TROUBLESHOOTING (Continued)
My remote control will not operate my Television
Press the TV key Does the remote control work now?
on the Remote Yes. Another mode was selected. Press the appropriate key to operate the different
Control. Then try it types of equipment. (Remote must be programmed. See pages 7~8.)
again. Be sure to No. Replace the batteries or confirm that they are properly installed.
point the remote
control at the TV.
18
SANYO Television Limited Warranty
OBLIGATIONS
To obtain Warranty service, television between the size of 13" ~ 27" (measured diagonally) must be delivered to and picked up from an authorized SANYO Service
Center at the user’s expense unless specifically stated otherwise in this warranty.
For 32" and above (measured diagonally), in-home service is available.
THIS WARRANTY IS VALID ONLY ON SANYO PRODUCTS PURCHASED AND USED IN THE UNITED STATES OF AMERICA, EXCLUDING ALL U.S. TERRITORIES
AND PROTECTORATES. THIS WARRANTY APPLIES ONLY TO THE ORIGINAL RETAIL USER, AND DOES NOT APPLY TO PRODUCTS USED FOR ANY INDUS-
TRIAL, PROFESSIONAL OR COMMERCIAL PURPOSE. THE ORIGINAL DATED BILL OF SALE OR SALES SLIP MUST BE SUBMITTED TO THE AUTHORIZED SANYO
SERVICE CENTER AT THE TIME WARRANTY SERVICE IS REQUESTED.
The name and addresses of Authorized Sanyo Service Centers may be obtained by calling the toll free number listed below.
1-800-877-5032 1-800-726-9662
Weekdays 7:30 A.M. ~ 4:00 P.M. Central Time Weekdays 8:30 A.M. ~ 5:00 P.M. Pacific Time
Subject to the OBLIGATIONS set up above and the EXCLUSION AND CONDITIONS set out below, SANYO MANUFACTURING CORPORATION
(SMC) warrants this SANYO product against defects in materials and workmanship for the periods of LABOR and PARTS specified below.
SMC will repair or replace (at its option) within a reasonable time the product and any of its parts which fail to conform to this warranty.
Repair or replacement of the product or its parts shall be the exclusive remedies available to user. The user is responsible for all other costs.
Such costs may include, but are not limited to all necessary or incidental costs incurred to install the repaired product. The warranty period
commences on the date the product was first purchased at retail.
CONTENIDO
20
PRECAUCION ESTE SIMBOLO INDICA QUE VOLTAJES PELIGROSOS QUE CONSTI-
TUYEN UN RIESGO DE TOQUE ELECTRICO ESTAN PRESENTES DENTRO
DE ESTA UNIDAD.
RIESGO DE TOQUE ELECTRICO NO ABRIR!
PRECAUCION: PARA REDUCIR EL RIESGO DE TOQUE ELECTRICO, NO QUITE LA CUBIERTA (O ESTE SIMBOLO INDICA QUE HAY INSTRUCCIONES IMPORTANTES DE
LA TAPA TRASERA). NO HAY PARTES ADENTRO QUE LAS PUEDA REPARAR EL USUARIO. OPERACION Y MANTENIMIENTO EN LA LITERATURA QUE SE ANEXA A
REFIERASE A PERSONAL CALIFICADO PARA REPARAR EL APARATO. ESTA UNIDAD.
1
VCR
UT POWE
2
TV
R
AUX
RESET
3
❺ MENU
VOLUME +
MENU +
POWER
MEN
7
TION
U
0
8
5
9
SLE
EP
6 +
VOL CH REC
ALL
VOL
■ El TV seleccionará el MUTE
PLA
DISPL
PorPlease
favor espere
wait TV
esta
TVautomáticamente
Y
REC
STO
is searching
modo correcto de
P
V-G PAU
UID SE
E
el your
for búscando sus
channels
Antena, de acuerdo al canales.
(Interruptor activado
tipo de señal que Ud. para encender.)
conecto. (Instalación de Baterías, vea página 24.)
22
MÉTODOS BÁSICOS DE CONEXIÓN Consejos Rápidos
Use uno de los siguientes métodos para conectar una señal a su TV. 1a— Si Ud. tiene
servicio de cable y una VCR. 1b—Si Ud. tiene un decodificador de cable y una VCR, ■ El TV seleccionará el
1c—Si Ud. tiene una antena externa o interna y una VCR, 1d— Si Ud. tiene un receptor modo correcto de
de satélite y una VCR. Conecte su sistema de cable o antena directamente a la TV, si Ud. Antena, de acuerdo al
no tiene accesorios opcionales. tipo de señal que Ud.
conecto.
➊a Sistema de Cable con VCR y TV TV
■ El TV se apagará
VCR automáticamente
UHF/VHF/CATV
75Ω
S-VIDEO IN -1 despuès de 15 minutos, si
no hay recepción de
IN
FROM ANT. ❷ AUDIO
VIDEO
INPUT
1
(MONO)
R AUDIO L VIDEO
AUDIO
OUTPUT
L
señal (si la estación de
OUT AUDIO
VIDEO R
cable o la estación de TV
OUT TO TV. INPUT
2
R AUDIO L
(MONO)
VIDEO
no esta transmitiendo).
Excepciones—Cuando el
modo de Video este selec-
cionado, el TV no se
➊b Sistema de Cable con Decodificador de Cable, VCR y TV TV
apagará automáticamente
VCR cuando la señal de recep-
DECODIFICADOR DE CABLE UHF/VHF/CATV S-VIDEO IN -1 ción ha sido detenida por
75Ω
❷ IN
FROM ANT. ❸ AUDIO
VIDEO
INPUT
1
(MONO)
R AUDIO L VIDEO
AUDIO
OUTPUT
L
15 minutos.
IN OUT OUT
AUDIO
OUT TO TV. VIDEO R
INPUT R AUDIO L VIDEO
2 (MONO)
Conector de 75 OHMS
❷
Use un conector de 75 ohms para
conectar una VCR, sistema de cable,
UHF/VHF/CATV
75Ω
AUDIO
S-VIDEO IN -1
AUDIO
TV
❸
(MONO) OUTPUT
antena externa/interna, o, receptor VIDEO
INPUT
R AUDIO L VIDEO
1 L
satélite directamente a la TV. AUDIO Ver página 31, Usando las
VIDEO R
INPUT
2
R AUDIO L
(MONO)
VIDEO Entradas de Audio/Video.
23
Consejos Rápidos PANEL POSTERIOR
Terminal de Entrada de S-Vídeo (Súper Vídeo)
■ Asegúrese que los Para realzar los detalles del vídeo, use el conector de
conectores de los cables entrada de S-Vídeo en lugar de la entrada de A/V 1.
Sí esta disponible en su equipo de vídeo externo. (La
estén totalmente asenta-
conexión de S-Vídeo se sobrepondrá a la conexión de
dos en los conectores. Video 1.
Ver páginas 30 y 31
antes de conectar el
UHF/VHF/CATV
equipo de video externo. 75Ω S-VIDEO IN -1
Entradas de Audio / Video (A/ V1)
■ Un pantalla de color
Conecte aquí el equipo externo de
Azul, con la palabra video (vea páginas 31). AUDIO AUDIO
VIDEO (MONO) OUTPUT
de Video1 o Video2 INPUT R AUDIO L VIDEO
desplegada, significa 1
L
24
TECLAS DEL CONTROL REMOTO MULTIMEDIA
Consejos Rápidos
➠
Apunte hacía el TV
➄ Tecla de MENU
Use esta tecla, junto con las teclas de ■ Las teclas del panel
navegación, use / y / frontal trabajan igual
➀ VCR TV AUX
para ajustar las funciones del sistema de que las teclas del control
remoto.
POWER RESET menú en pantalla (vea páginas 28 ~ 30).
➁
INPUT
➉ ➅Teclas
( /
de búsqueda de Canales
) y de Volumen ( / )
■ Apunte el control remoto
hacía el equipo que Ud.
quiere operar. Objetos
1 2 3 11 Presione para búscar a través de los entre el control remoto y
canales en memoria y para ajustar el
➂ 4 5 6 volumen.
el equipo, pueden causar
un mal funcionmiento
7
CAPTION
8 9
SLEEP
➆Tecla de MUTE
Presione una vez para apagar el ■
del control remoto.
Asegúrese que baterías
➃ MENU
0
RECALL
12 volumen y presione nuevamente para
restaurarlo.
este instaladas
correctamente.
➄ VOL
CH
VOL
13 Nota : Cuando este usando las salidas
de audio, esta tecla no enmudecera en
■ Sí el control remote no
funciona: presione la tecla
➅ sonido. de TV (ver artículo 1).
➇Teclas para VCR / DVD ■ El control remote debe
➆
MUTE DISPLAY Estas teclas controlan el VCR y/o de ser programado antes
14 Funciones de la DVD Avance hacia de operar su VCR, DVD,
PLAY
adelante ( ), Rebobinado ( ), o su Decodificador
➇ REC STOP PAUSE Reproducción ( ), Grabación (
y la funciones de Detener ( ), y
), de Cable. (Ver
páginas 26~27.)
Pausa ( ) de su VCR. ■ No puede seleccionar un
➈
V-GUIDE
canal con las teclas
➈V-Guide (Vea páginas 33 ~ 35.) numeradas. Presione
➉Tecla de RESET
Presione esta tecla dos veces para llamar
“0” antecediendo a los
números del 1~9.
Ejemplo:Canal “05.”
a los ajustes de fábrica. La TV inicia-
➀ Teclas de Modo
Use estas teclas para programar el
lizará automáticamente la búsqueda de ■ La letra “C” antecedi-
endo a número de canal,
canales, y eliminará todos los ajustes
control remoto y para seleccionar el hechos por el usuario. (Vea página 35.) indica que es un canal de
modo de operación (VCR, TV, o AUX ). 11 Tecla de POWER cable.
Ajustando el nivel de
➁ Tecla
■
de INPUT Presione esta tecla para encender o
volumen: La flecha de
Presione para seleccionar la fuente del apagar la TV.
parpadeante hacia el
programa que va a ser desplegado en la 12 lado derecho, indica
Tecla de SLEEP
pantalla: Señal TV o señal de del Use esta tecla con “0” para ajustar el que el volumen esta
equipo de video que ha sido conectado cronómetro para Dormir (vea página 35). aumentando. La flecha
a las entradas de A/ V. 13 parpadeante hacia la
Tecla de RECALL izquierda indica
➂ Teclas Numeradas
Dos teclas deben de ser presionadas
Seleccione un canal, entonces selec-
cione otro usando las teclas numeradas.
que el volumen es
disminuyendo.
para seleccionar un canal. Ejemplo : Presione Recall, para hacer el cambio ■ Usando V-Guide
Presione 0 y después 6, para seleccionar entre estos canales. Los comandos de ajuste
el canal 6. Para canales de cable del 100 14 Tecla de DISPLAY de control Paternal solo
hasta el 125, presione y mantenga así la Presione una vez para que aparezca el pueden ser cambiados
tecla del número 1 hasta que el C1– – desplegado del canal. Presione dos usando el control
aparezca. veces para que el desplegado aparezca remoto. Ver
nuevamente. Presione nuevmente para páginas 34 y 35.
➃ Tecla de CAPTION (Vea página 32.) eliminarlo.
25
PROGRAMANDO EL CONTROL REMOTO MULTIMEDIA
Consejos Rápidos Localice su código. Este se encuentra junto a ❸ Presione la tecla de Power y las teclas de
■ Asegúrese que baterías la marca de su equipo, en la carta de abajo y Channel. Sí estas operan de manera
este instaladas página 27. (Ejemplos ilustrados para una VCR adecuada la programación esta completa.
correctamente. Sanyo.) Sí no es así, use otro código, sí este esta
➊ Presione y mantenga asi la tecla de disponible y repita los pasos.
■ El control remoto no Notas :
funciona con mi VCR o VCR o AUX.
Presione y VCR TV AUX – Puede haber VCR’s, DVD’s, y decodifi-
Decodificador de Cable. cadores de cable que este control remoto
mantenga POWER
– Presione la tecla INPUT RESET
no pueda operar.
así el botón.
de VCR o AUX.
– Reprogramar el ❷ Usando las teclas NUMERADAS en el – Algunos manufacuradores pueden usar
control remoto. control remoto, de acceso el número de diferentes tipos de controles remoto. Si la
tres dígitos para su VCR, DVD, o Decod- marca de su equipo, tiene listados varios
■ Tecla de función espe- ificador de Cable. La tecla se iluminará 5 códigos, repita el pasos ❶ y ❷ con cada
cial: La tecla de INPUT veces cuando sea liberada, sí el código número, hasta que Ud. encuentre el
funciona como la tecla fue aceptado. código correcto. Escriba sus códigos en
de TV/VCR en la VCR, 1 2 3 los espacios en la parte posterior de su
cuando el control remoto De acceso al 4 5 6 control remoto y en los siguientes
es ajustado para fun- Código : Ejemplo 7 8 9 espacios como una rápida referencia.
cionar con la VCR. para una VCR Sanyo, CAPTION SLEEP
26
Carta de Códigos par Decodificador de Cable Carta de códigos para reproductores de DVD
MARCA ..............CóDIGO NO. MARCA .............. CóDIGO NO. MARCA .................. CóDIGO NO. MARCA .................. CóDIGO NO.
ABC ........................ 304,306,309,312 PHILIPS .................. 325,329,301 APEX .......................... 523 PHILIPS ...................... 508,502
.............................. 313,314,318,321 .............................. 313,314,322 DENON ........................ 501,520 PIONEER .................... 511,505,518
.............................. 322,324 PIONEER ................ 333,312,317
EMERSON .................. 521 PROSCAN.................... 504
AIM ........................ 321 PROSCAN .............. 327
ARCHER .................. 334 QUASAR .................. 302,307,317 FISHER........................ 500 RCA ............................ 504
BELL & HOWELL .... 313 RADIO SHACK ........ 334 GE .............................. 504 SAMSUNG .................. 512
CONTEC .................. 302,305,307,308 RCA ........................ 328,302,307 HARMAN/KARDON...... 513 SANYO ........................ 500
.............................. 311,318,320,324 REGAL .................... 330,307,320 JVC.............................. 510,515 SHARP ........................ 517
CPI .......................... 319 REMBRANT ............ 305,309
KENWOOD .................. 507 SHERWOOD ................ 519
DIAMOND .............. 320 SAMSUNG .............. 310,312
EAGLE .................... 313 SCIENTIFIC MAGNAVOX ................ 508,502 SONY .......................... 506
EMERSON................ 334 ATLANTA .............. 327,307,324 MARANTZ .................. 508 TECHNICS .................. 501
GEMINI .................... 334 SIGNAL .................. 310 MITSUBISHI................ 503 THETA DIGITAL .......... 511
GENERAL SIGNATURE ............ 300,309,321,322 ONKYO ........................ 502,516 TOSHIBA .................... 502
INSTRUMENTS .... 303,309,311,320 SPRUCER .............. 302,307,316
OPTIMUS .................... 511 YAMAHA .................... 501,509
.............................. 321,322,323,300 STARCOM .............. 332,309,311,321
GOLDSTAR .............. 312 .............................. 322,323 ORITRON .................... 522 ZENITH........................ 514,502
GOODMIND ............ 334 STARGATE .............. 309,310,311,321 PANASONIC ................ 501,518
HAMLIN .................. 330,320 .............................. 322,334
HITACHI .................. 309 TELEVIEW .............. 310 Cambiando las Baterías
HYTEX .................... 318 TOCOM .................. 300,303,304,305
JERROLD ................ 303,308,309,311 .............................. 306,307 Los números del código de programación, se mantendrán en
.............................. 313,319,320,321 TOSHIBA ................ 331,309,311
.............................. 322,323,300 .............................. 316,322
la memoria por 5 minutos, cuando Ud. cambie las baterías.
MAGNAVOX ............ 325,329,301 UNIKA .................... 314
.............................. 313,314,322 UNITED AIRTISTS .. 318 Anote sus Marca de VCR
MEMOREX .............. 332,313,314 UNITED CABLE ...... 309 códigos de
MOVIE TIME .......... 306,310,314 U.S. Código No:
NORTHCOAST ........ 316 ELECTRONICS ...... 309,322,324 VCR, Decodifi-
NSC ........................ 305,306,314 VIEWSTAR .............. 326,313,315 cador de Cable, Marca del Decodificador
OAK ........................ 305,318,320 WARDS .................. 321,322 Reproductor de
PANASONIC ............ 302,307,317 WARNER ................ 312
de Cable Código No:
PARAGON .............. 313,314 ZENITH .................. 331,316,322,324 DVD´s, para
referencias Marca del Reproductore
futuras. DVD Código No:
27
Consejos Rápidos
AJUSTES DEL TV
Los menús en pantalla proveen al observador, un fácil acceso a los ajustes.
■ Siga siempre las instruc- Solamente use las teclas del control remoto y siga las instrucciones.
ciones de la pantalla.
■ El menú se desplegará
COMO HACER LOS AJUSTES Botones ▲▼ Botones –+
por 20 segundos aproxi-
Reloj 0:00
madamente. Presione 1. Presione MENU. Audio ➧Stereo Mono SAP
MENÚ nuevamente 2. Use las teclas de / para Imagen/Sonido ➧Deporte Cine
Noticia Manual
para desplegarlo. resaltar la función deseada. Canal Inicial ➧NO SI C – – –
Antena ➧Cable VHF/UHF
■ Use las teclas de 3. Use las teclas de / para escoger Loc. Canales ➧NO Iniciar
CANALES / la opción deseada (➧ indica la opción Buscar Canales C 34 Anadido
y las teclas de ➧Espanol
seleccionada). Menu Lenguaje English Francais
VOLUMEN /
Artículos con submenús requiere pasos
para navegar a través Use MENU para salirse
adicionales.
del menú y para hacer
las selecciones de los
menus.
■ " Par ver la hora del AJUSTANDO EL RELOJ
día después de ajustar el
reloj, presione la tecla 1. Presione MENU.
de DISPLAY.
2. Use las tecla de para ajustar la
Botones ▲▼ Botones – +
■ La señal de Servicio hora y tecla de para ajustar los Reloj 10:00
Extendido de Informa- minutos. Audio
ción (XDS) puede no ser 3. Presione la tecla de MENU para
transmitido por todas salir.
las transmisoras.
■ Bajo condiciones de
señal estéreo débil,
Usted puede recibir
un sonido de mayor AJUSTE EL MODO DE AUDIO
calidad en la posición Seleccione el sonido deseado; Estéreo (Stereo), Mono, or SAP (segundo
de “Mono.” programa de audio).
Nota : Estéreo y SAP deben ser parte de
señal transmitida.
Botones ▲▼ Botones – +
1. Seleccione Estéreo (Stereo), Mono, o
Reloj
SAP de la opción de Audio.
Audio ➧S
Stereo Mono SAP
2. Presione la tecla de MENU para salir.
Nota : La TV se ajustará automáticamente
a estéreo, sí esta es desconectada o
una falla en el suministro eléctrico
ocurre.
28
AJUSTE DE IMAGEN/SONIDO
Botones ▲▼ Botones – +
Consejos Rápidos
Ajustes de Fabrica para Imagen/Sonido :
Reloj
Seleccione Deporte, Cine, o Noticia de Audio
■ Para expandir su
las opciones de Imagen/Sonido. I m a g e n / S o n i d o Deporte Cine
Noticia ➧M
Manual experiencia en ver
programas, seleccione,
Para personalizar manualmente la
Deporte, Cine
Imagen/Sonido : (Películas) o Noticia,
Botones ▲▼ Botones – +
1. Seleccione Manual de las opciones de que correspondan a el
Color
Imagen/Sonido. Tinte
programa que Ud.
Contraste esta viendo.
2. Presione MENU para activar los ajustes del
Brillo
submenú de Imagen/Sonido. ■ Use esta función para
Nitidez
mejorar el color de la
3. Use las teclas de / para resaltar el R e s a l t a r C o l o r Normal ➧C
Caliente
imagen, y el tono de
control que se quiere ajustar. Bajos ❙❙❙❙❙----
Agudos piel. Seleccionando
4. Use las teclas de / para hacer los cálido, se acentuará el
ajuste de imagen o sonido que Ud. quiera Use MENU para salirse color de la imagen.
cambiar.
■ El sonido envolvente
5. Presione la tecla de MENU para salir. será automáticamente
Imagen/Sonido Submenús Controles
seleccionado cuando se
llame a las funciones de
Deportes (sport) o
AJUSTE DE CANAL INICIAL (Películas) Cine y estos
sean seleccionados en el
La TV puede ser programada para sintonizar su canal favorito, cada vez que se encienda,
menú de Imagen/Sonido.
como puede ser un noticiero, cadena de deportes, o la salida de su VCR.
Sonido (surround)
envolvente expandirs
1. Presione la tecla de MENU. Botones ▲▼ Botones – + los efectos de sonido
2. Use las teclas de / para iluminar Reloj mientras se este
Canal Inicial. Audio reciviendo señales
Imagen/Sonido
3. Presione para activar (SI), Seleccione estéreo MTS.
Canal Inicial No ➧S
SI C03
el número del favoritos canal selec- ■ Cuando el Canal Inicial
Antena
cionado (ejemplo) : C03. Para Loc. Canales este (APAGADO) NO la
seleccionar canales de Cable arriba de Buscar Canales TV sintonizará el último
99, presione y mantenga así la tecla del Menu Lenguaje
canal seleccionado
1, hasta C1-- aparezca. Seleccione canales con 0~9 cuando se encienda la
Use MENU para salirse
4. Presione la tecla de MENU para salir. TV.
■ Cuando ajuste el modo
de Antena, escoja el
REAJUSTANDO EL MODO DE ANTENA/CABLE Y modo Cable, si su TV
BÚSQUEDA DE CANALES esta conectada a un
sistema de cable, de otra
Reajuste el Modo de Antena /Cable o Búsqueda de Canales si es requerido, si tienen
manera escoja
canales adicionales, si es que se cambio a
VHF/UHF.
otra ciudad o si se ha instalado el servicio Loc. Canales NO ➧ Iniciar
de cable. Buscar Canales
Menu Lenguaje
1. Seleccione Iniciar del menú de Use MENU para salirse
opciones de búsqueda de canales.
29
AGREGANDO O BORRANDO CANALES
Consejos Rápidos Use las teclas del control remoto para hacer los ajustes.
1. Presione la tecla de MENU.
■ Canales borrados en 2. Use las teclas de / para iluminar Buscar Canales.
la memoria de
3. Presione la tecla de para iluminar el número del canal en el área de entrada.
canales, pueden ser
seleccionados con las 4. De entrada al número del canal por ejemplo : C34. Para canales de Cable arriba de 99,
teclas númeradas. presione y mantenga así la tecla del 1, hasta C1-- aparezca. Entonces entrar en la otra
dos números.
■ El número del canal Buscar Canales C 34 Saltado
debe de ser iluminados 5. Presione la tecla para seleccionar Menu Lenguaje
antes de presionar la la opción (ejemplo) : Anadido cambiara a Seleccione canales con ▲▼ o 0~9
tecla de para Saltado. Use MENU para salirse
menos a 60 cm de las
USANDO LA SALIDA DE AUDIO
bocinas de un sistema
estéreo. Los magnetos en CONECTE UN AMPLIFICADOR ESTÉREO A LAS SALIDAS DE A/V
dichas bocinas pueden 1. Conecte la Salida de Audio (R/L) ❶ a la entrada del Amplificador Estéreo (R/L) ❷.
afectar la calidad de 2. Presione POWER en el control remoto para encender la TV. Además Encienda el
pureza de la imagen. equipo externo.
■ No conecte bocinas
externas directamente a
la TV.
UHF/VHF/CATV
75Ω S-VIDEO IN -1
❶
AUDIO AUDIO
VIDEO (MONO) OUTPUT
INPUT R AUDIO L VIDEO
1
L
AUDIO R
VIDEO
❷
INPUT R AUDIO L VIDEO
2 (MONO)
Parte Posterior de TV
Amplificador Estéreo
30
USANDO LAS ENRADAS DE AUDIO/VIDEO Consejos Rápidos
CONECTANDO UNA VCR O OTROS EQUIPOS EXTERNOS A LA TV
■ Asegúrese que todos los
Apague la TV y los equipos externos antes de conectar los cables. (Los cables no son
suministrados con la TV.) conectores de los cables
este totalmente asenta-
1. Conecte la salidas (R/L) de la VCR, DVD, DSS, o otros euipos’ a las entradas de dos en los conectores
la TV (R/L) ❶. de entrada.
Para VCR monofónicas (una salida de Audio) conecte la salida de la VCR a la entrada ■ Siempre combine los
(L) de la TV. cables de acuerdo a los
colores: ROJO para el
2. Conecte la salidas (R/L) de video la VCR, DVD, DSS, o otros euipos’ a la entrada de
audio del lado derecho,
la TV video ❷.
BLANCO para el audio
DVD
31
Consejos Rápidos TRANSMISIÓN CAPTADA (Closed-Caption)
La transmisión captada es información de texto transmitida junto con la imagen y el
■ Si la funcíon de Trans- sonido, y que puede ser desplegada en la pantalla de la TV. Debido a los diferentes tipos
misíon Captada esta de subtítulos que pueden ser transmitidos con la señal de TV, existen diferentes modos de
activada, y los subtítu- transmisión capatada que son usados para desplegar subtítulos. Los modos de transmisíon
los no son transmitidos, captada reconocidos por este modelo son los siguientes : Caption1, Caption2, Texto1 y
un cuadro de color Texto2. Las transmisoras locales deciden que tipo de señal de transmisión captada es
negro puede aparecer y transmitida. Ellos escogen de no proveer subtítulos o proveerlos en uno o todos los modos
mantenerse así en la disponibles.
pantalla de la TV.
Caption1 : Este es el principal modo usado para subtítular pro-
gramas (las palabras coinciden con el programa que Ud. esta
viendo). La mayoría de las transmisoras usarán Caption1 para
transmitir programas subtítulados, Estos subtítulos son general-
mente una o dos lineas y aparecen el la parte inferior de la
pantalla o cerca de la persona que esta hablando.
Dos fuera y dos golpes
o Texto2, o presione la texto. Este texto aparecerá dentro de un fondo negro que casi
LLUIA, TEMPERATURA MAS
ALTA QUE LOS 30', VELOCIDAD
DEL VIENTO OESTE 20m/hr. CON
tecla de RESET, para puede ser tan grande como la pantalla de la TV. El texto DESVIACIÓN AL NOROESTE A
MEDIA MOCHE. VIERNES NUBLADO
cancelar la función de desplegado de esta manera no esta relacionado con el pro-
TOTAL Y MAS FRIÓ CON
PROBABILIDAD DE LLUVIA DEL
subtítulos y ajustes grama. Estos subtítulos pueden ser usados por las estaciones
50%
❷
Texto1, Texto2, o Quikcap.
32
➊
INFORMACÍON DE GUÍA-V Consejos Rápidos
NOTA : ESTA FUNCIÓN ESTA DISEÑADA PARA CUMPLIR REGULACIONES DE LA
FCC PARA V-CHIP EN LOS ESTADOS UNIDOS DE AMÉRICA, ESTA ■ Use las teclas de
FUNCIÓN NO PUDIERA ACTIVARSE CON SEÑALES QUE SE ORIGINEN EN CANALES /
OTROS PAÍSES. y las teclas de
Con la introducción de la tecnlogía de “V-Chip”, es ahora posible que los tele- VOLUMEN / para
visores Sanyo, puedan interpretar los códigos de clasificación de la MPAA navegar a través del
V
y Ordenamientos de Control Paternal en TV. Cuando estos códigos son v
VCR
menú y para hacer las
INP
UT
TV
PO
1
W
4
ER
AU
selecciones de los
X
7
CA
RE
5
detectados, el TV bloqueará, dependiendo de las selecciones hechas en el
PT
SE
ION
ME
T
8
3
NU
VO
6
-L
CH
9
SL
MU
EE
TE
P
RE
SE
T
+ VO
RE
PL
C
V-G
L
AY
UID
ST
DIS
PIP
OP
E
PLA
ON
Y
SW
/OF
PA
F
AP
US
QU
LO
E
ICK
CA
menus.
TIO
FR
sistema de V-Guide.
EE
SE
ZE
LE
CT
■ La función de V-Guide
ACERCA DE LOS ORNENAMIENTOS DE CONTROL es accesible solamente
PATERNAL EN TV Y MPAA por el control remoto.
MPAA y los Ordenamientos de control paternal en TV, son sistemas de clasificación que ■ Un icono con indica-
permiten a los padres tener una información avanzada de prevención contra el contenido ciones de clasificaciones
de una película o programa de televisión. aparecerá generalmente
MPAA es una sistema voluntarío de clasificación, usado por la industria cinemato- la esquina superior
gráfica. Los Ordenamientos de Control Paternal en TV estan moldeados a la izquierda en la pantalla
clasificación de la MPAA después que fue diseñada por ser fácil de usar, de entender y de su TV.
de localizar. ■ El desplegado de
El Ordenamiento de Control Paternal en TV esta basado en edad y contenido de infor- V-Guide se mantendra
mación. Esta información da a los padres una manera discreta de escoger el material que en pantalla aproximada-
va a ser visto por sus hijos. mente por 20 segundos.
Si este desaparece pre-
La clasificación contenida esta representada por iniciales : D (Diálogos Sugestivos),
sione la tecla de
L (Lenguaje para Adultos), S (Contenido Sexual), V (Violencía), y FV (Fantasía
V-GUIDE.
Violenta). Cuando la programación contiene cualquiera de estas condiciones, estas
iniciales forman parte del ícono que es desplegado en la pantalla de la TV.
Un icono de clasificación aparecerá generalmente en la esquina superior izquierda en la
pantalla de su TV por 15 segundos, en el inicio del programa, y debe de repetirse a la
segunda hora, a largo del programa. Este icono además puede aparecer cuando se esta
regresando de comerciales. Puede haber otras instancias por lo que se pueden desplegar
estos íconos. Los padres estan alentados a familiarizarse con estos íconos y sus
significados.
REAJUSTANDO LA TV
Presione la tecla de RESET, para reajustar automáticamente la televisión a los ajustes de fábrica.
Estas funciones se reajustarán automáticamente :
• Se reajusta imagen / sonido : Color, Tinte, Contraste, Brillo, Nitidez,
Resaltar Color, Bajos, y Agudos Para preajustes
• Se restablecen los Canales en Memoria de fabrica oprima
• Se ajusta el Audio a Estéréo nuevamente RESET y
• Se desactiva la función de Canal Inicial comenzar loc. canales
• Se desactiva la función Subtítulos
• Se desactiva la función de Guía-V
• Se cambia el lenguaje a Inglés
• Reloj y Cronometro para Dormir (Si fue previamente ajustado)
Si quiere personalizar los ajustes, estos pueden ser hechos nuevamente usando el menú de opciones.
La TV se apaga sola
Cheque la ¿Estaba el conector suelto o desconectado?
conexión de Sí. El problema pudo apaga la TV por una perdida de Señal. (Vea página 23.)
la antena. No. Presione la tecla de encendido.
¿ La TV encendió?
Sí. El cronómetro para dormir había sido activado.
No. Desconecte la TV por unos segundos. Conéctela nuevamente y
presione el botón de encendido.
36
No hay Subtítulos
El programa que Sí. Active la función de subtítulos. Presione la de Caption, y presione la tecla de 0 hasta
Ud., esta viendo resaltar Caption1.
esta Subtitulado. No. Sintonice un canal que este transmitiendo un programa subtitulado.
37
SOLUCION DE PROBLEMAS (Continuación)
CUIDADOS Y LIMPIEZA
La superficie del gabinete puede ser dañada si no recibe un apropiado mantenimiento. Varios productos usados en el
hogar como aerosoles, agentes de limpieza, solventes y ceras pueden causar daños en el terminado de la superficie
del gabinete.
1. Desconecte el cordón de Potencia antes de limpiar el televisor.
2. Use un trapo húmedo para limpiar.
Nota : Nunca aplique liquidos en aerosol en la pantalla, este puede escurrirse y gotear
dentro del chassis. Este puede causar fallas en los componentes no cubiertos por
la garantía.
Este símbolo impreso, significa que el producto esta listado por Underwriters’s
Laboartories Inc. El diseño y manufactura de este producto, reúne los rígidos
estándares de U.L., contra riesgos de incendio , accidentes o descargas eléctricas.
38
Garantía Limitada en el Televisor SANYO
OBLIGACIONES
Para obtener el servicio de garantía, un televisor con un tamaño de 13"~ 27" (medidos diagonalmente) debe de ser enviado y recogido de un Centro de
Servicio autorizado SANYO, con cargo al usuario, al menos que se especifique de otra manera en esta garantía.
Para televisores mayores de 32" (medidos diagonalmente), se encuentra disponible el servicio en casa.
ESTA GARANTÍA ES VÁLIDA SOLO EN PRODUCTOS SANYO COMPRADOS Y USADOS EN LOS ESTADOS UNIDOS DE AMÉRICA, EXCLUYENDO TODOS LOS
TERRITORIOS Y PROTECTORADOS. ESTA GARANTÍA APLICA SOLAMENTE AL COMPRADOR ORIGINAL EN DETALLE, Y NO APLICA A PRODUCTOS USADOS
PARA CUALQUIER PROPÓSITO INDUSTRIAL, PROFESIONAL O COMERCIAL. LA FACTURA O RECIBO DE COMPRA DEBE DE SER SOMETIDO A LA
AUTORIZACIÓN DEL CENTRO DE SERVICIO SANYO, EN EL PERIODO DEL SERVICIO DE GARANTÍA REQUERIDO.
El nombre y la dirección de los Centros de Servicio Sanyo, se pueden obtener llamando a los siguientes números sin costo.
1-800-877-5032 1-800-726-9662
Días Hábiles 7:30 A.M ~ 4:00 P.M. Días Hábiles 8:30 A.M ~ 5:00 P.M.
(Horario del Centro) (Horario del Pacífico)
Sujeto a las OBLIGACIONES listadas anteriormente las EXCEPCIONES Y CONDICIONES se listan a continuación. SANYO MANUFACTURING
CORPORATION (SMC) garantiza este producto SANYO contra defectos en materiales y mano de obra, por los periodos de MANO DE OBRA
y PARTES, especificados a continuación. SMC reparará o reemplazará (a su opción) dentro de un tiempo razonable, el producto o cualquiera
de sus partes que pudieran fallar conforme a esta garantía. Reparación o reemplazo del producto, o de sus partes que deberán ser exclusi-
vas en reparaciones disponibles para el usuario. El usuario es responsable por todo los otros costos. Estos costos pueden incluir, pero no
limitados a todos los costos incidentalmente incurridos a la instalación del producto reparado. El periodo de garantía comienza en la fecha
que el producto fue comprado al distribuidor por primera vez.
MANO DE OBRA PARTES TUBO DE IMAGEN
90 Días 1 Año 2 Años
EXCLUSIONES Y CONDICIONES
Esta garantía no cubre (A) Los ajustes inapropiados en controles operados por el cliente, y que están explicados de manera apropiada en el manual de
instrucciones para este modelo, o (B) la reparación de cualquier producto cuyo número de serie ha sido alterado, dañado o borrado.
Esta garantía no aplica al gabinete, partes cosméticas, antenas, perillas, baterías o quemaduras en el tubo de imagen o proyección, causadas por equipos
electrónicos o juegos de video.
Esta garantía no aplica al desempaque, ajuste, instalación, movimientos en producto para reparación, o reinstalación del producto después de la reparación.
Esta garantía no aplica a las reparaciones o reemplazos requeridos por cualquier causa más allá del control de SMC, incluyendo, pero no limitado, a cualquier
mal funcionamiento, defecto, o falla causada por, o, el resultado por un servicio o partes no autorizadas, mantenimiento no apropiado, una operación contraria
a las instrucciones proporcionadas, accidentes por trafico o envío, modificaciones o reparaciones hechas por el usuario, abuso, mal uso, negligencia, accidente,
líneas de voltaje no apropiadas, fuego, inundaciones, u otros Casos de Fuerza Mayor, o de uso cotidiano.
En lugar de otras garantías expresadas con respecto de la televisión, o a la instalación, operación, reparación, de la televisión, SMC no será responsable por la
perdida en el uso de la unidad, inconveniencia, perdida o daño de la propiedad personal, si directamente o indirectamente pueden surgir en el contrato.
LA DURACIÓN DE CUALQUIER GARANTÍA, PUEDE ESTAR IMPLÍCTA POR LA LEY (INCLUYENDO LA GARANTÍAS DE APTITUDES MERCANTILES) ES LIMITADA
A EL TERMINO DE ESTA GARANTÍA. SMC NO ACONTECERA SER RESPONSABLE, POR DAÑOS INCIDENTALES O EN CONSECUENCIAS SURGIDAS POR LA
PROPIEDAD O USO DE ESTE PRODUCTO, O POR LA DEMORA EN EL CUMPLIMIENTO DE LAS OBLIGACIONE BAJO ESTA GARANTÍA, DEBIDO A CAUSAS
FUERA DE SU CONTROL. ALGUNOS ESTADOS NO PERMITEN LIMITACIÓN DE QUE TAN PROLONGADA, E IMPLÍCITA ES LA DURACIÓN DE LA GARANTÍA, Y
NO PERMITE LA EXCLUSIÓN O LIMITACIÓN DE DAÑOS CONSECUENTES, LAS ANTERIORES LIMITACIONES Y EXCLUSIONES NO PUEDAN APLICAR A UD.
ESTA GARANTÍA LE DA DERECHOS LEGALES ESPECIFICOS. UD. PUEDE TENER OTROS DERECHOS, LOS CUALES PUEDEN VARIAR DE ESTADO A ESTADO.
Para su protección en cualquier evento de robo o perdida de este producto, llene por favor la información requerida a continuación, y MANTÉNGALA en un lugar
seguro, en sus registros personales.
No. de Modelo ____________________________________________ No. de Serie __________________________________________
(Localizado en la tapa de la unidad)
Fecha de Compra __________________________________________ Precio de Compra ______________________________________
Sanyo Cares!
The industry is committed to making home entertainment
enjoyable and safe.
The Consumer Electronics Association formed the Home
Entertainment Support Safety Committee comprised of television and
consumer electronics furniture manufacturers to advocate children’s safety
and educate customers and their families about television safety.
Consumer Electronics Association CEA, 2500 Wilson Boulevard Arlington, VA 22201 Tel 703 907 7600 Fax 703 907 7690 www.CE.org
A sector of EIA CEA is the Sponsor, Producer and Manager of the International CES® and is a Sector of the Electronic Industries Alliance