Professional Documents
Culture Documents
Group 4
4.6 Accessories
4.6.1 - 4.6.3
1/2 2 1
max. 25 kg (Top Line 25/27) max. 20 kg (Top Line 110) max. 125 kg
max. 75 kg (Top Line 1) max. 10 kg (Top Line 112)
optional optional –
(Top Line 25/27)
Technical brief:
• Max. door weight 50 kg/door
• Cabinet height 1843 - 2643 mm
• Door height 1800 - 2600 mm
• Door width 800, 1000, 1100 or 1200 mm
• Cabinet depth 450 - 710 mm
• Door thickness max. 25 mm
• Runner profile in aluminium
* in steps of 20 mm
* in steps of 20 mm
Set contains:
1 end cap, grey plastic
2 stop pin, galvanized steel
1 support for end cap, galvanized steel
4 outer bracket, galvanized steel
1 striker plate, black rubber
4 support units, grey plastic
2 angle top/bottom, galvanized steel
2 limiter stops right/left, galvanized steel
1 adjustable engagement block, grey plastic
4 synchronisation lever,
can be shortened in steps of 20 mm, nickel-plated steel/grey plastic
20 Euro screws countersunk 6,3 x 15 mm, galvanized steel
2 serrated washers, galvanized steel
8 chipboard screws 3,5 x 16 mm, galvanized steel
1 hexagon screw M5 x 22 mm, galvanized steel
4 hexagon head screws M5 x 12 mm, galvanized steel
1 self-adhesive brush seal, grey
16 oval head screws 5 x 70 mm, galvanized steel
22 countersunk screws 4 x 20 mm, galvanized steel
Order no. PU
9 079 531 1 set
Example:
The following system components are required
for a 3-door sliding-door cabinet
with a door width of 1000 mm and
a door height of 2000 mm:
2000 • 3 x horizontal set for door width of 1000 mm,
order no. 0 048 619
• 3 x vertical set for door heights of 1800 - 2000 mm,
order no. 9 079 551
• 3 x 1-door accessory set,
order no. 9 079 531
1000
1000
1000
450 - 710
The accessory set extends cabinet design options for In Line cabinet
constructions by combining sliding doors and cabinet elements, for
example, with hinged doors, drawers or shelves.
Functional principle
Mounting examples
Accessory set
for cabinet elements with hinged doors, drawers, shelves etc.
• Variable in width from 600 - 1200 mm
Set contains:
1 cabinet guide profile, top, aluminium silver anodised
1 cabinet guide profile, bottom, aluminium silver anodised
2 top support units, grey plastic
2 bottom support units, grey plastic
4 M5 x 12 mm hexagon head screws, galvanised steel
16 oval head screws, ø5 x 70 mm, galvanised steel
Order no. PU
9 080 215 1 set
Example
To construct a cabinet with
• 2 sliding-door elements
(door width 1200 mm, door height 2200 mm)
• 2 cabinet elements fitted with
drawers and hinged doors
you will need the following system components:
2200
1
2
3
2
1
2
1
Türausricht-Beschlag
see page 4.6.1
2
1
1
2 1
1
3
Intus
180
33,5
14 168,5 R 8,5
R 8,5
73 60
11,5
Nidum
• Anodised aluminium/zinc aluminium finish
11 8
1
11
30 35
Spira
• Anodised aluminium/zinc aluminium finish
15,5 17,5
4
15,5
32
43 37
4 2 -22
Athena
• Zinc
Misnia
• Zinc
54/49
14,5 8 19,5
/ 42
Bovium
• Anodised aluminium/zinc aluminium finish
14
= –10
60 56
23
14
5 5 9
-20
Order no. PU
0 115 179 1/50
Megara
• Stainless steel brushed
180 / 165 60 / 45
ø6
2
19
150
38
Order no. PU
9 070 871 1/25
Dodona
• Stainless steel brushed
120 / 110
40
ø3,5
2
13
90 28
Order no. PU
9 070 693 1/50
Tegea
• Stainless steel brushed
125
110 83
ø5 65
2
17
100 58
Order no. PU
9 071 142 1/25
Agina
• Stainless steel brushed
ø90 / 80
ø5
2
19
ø70
Order no. PU
9 070 139 1/25
Technical brief:
• Max. door weight 20 kg/door
• Max. door height 2000 mm
• Door width of 450 or 600 mm
• Length of runner profile 2500 mm
• Minimum profile length 1806 mm/2406 mm
Note:
Doors must be of identical weight.
Travel
Door width
Door width
Travel
Door width Travel Length of runner profile Minimum profile length Order no. PU
mm mm mm mm
450 450 2500 1806 0 048 663 1 set
600 600 2500 2406 0 048 665 1 set
Mounting application
36,5 36,5
34,5 Euro screw Euro screw
34,5
21,8 ø 6,3 x12,5 21,8 ø 6,3 x12,5
3,7 ø5 3,7 ø5
min. 16
min. 16
20 20
35 35
18 2
Euro screw Self-tapping screw 12 2
ø 6,3 x12,5 ø5 ø 3,5 x 9,5 ø 2,9
45 45
12,5 19
25 19 12,5
3 25 19
3
pcs
1
Cover profile
• For clipping in the runner profile
• Length 2500 mm
• Plastic, silver-grey
pcs
1
pcs pcs
8 4
pcs pcs
16 4
35 35
Side Side
7,5
Mounting application
2
18
Side Side
35 35
2 18 2
18
Self-tapping Self-tapping
screw ø 2,9 screw ø 2,9
ø 3,5 x 9,5 ø 3,5 x 9,5
Side Side
ø 6,3
x13
2500
15 9
25 8 ø5,5
20,5
32
12 max. 20 kg 42
max. 20 kg
11,5
32
Front panel assembly 42
Technical brief:
• Max. door weight 50 kg/door
• Door panel width from 500 mm
• Runners for 29 and 36 mm
door centre distances
• Max. door thicknesses of 21 mm and 28 mm
• Can be combined with bottom guide
STB 11, STB 12, STB 15 or STB 35
Installation
behind the runner
profile
!
Cover profile
Toolless unhinging
safety device,
front door
Support
Stop
Toolless unhinging
safety device,
rear door
Set contains:
1 runner profile right, length 1500 or 2000 mm
1 runner profile left, length 1500 or 2000 mm
aluminium silver anodised
1 connecting angle including fixing screws,
ggalvanized steel
2 support for the runner profile, grey plastic
Set contains:
2 dampening system units right/left, grey plastic
Order no. PU
0 046 655 1 Set
Cover profile
• Length 1000 mm
• Plastic
! Installation
below the runner
profile
Cover profile
Toolless unhinging
safety device,
front door
Support
Stop
Toolless unhinging
safety device,
rear door
Runner profile
• For installation in front of the cabinet top panel
• Aluminium silver anodised
! 2
2
2
3
9 079 734
9 082 552
–
9 096 754
9 079 734
–
9 084 432
–
1 set
1 set
1 set
1 set
3 – 9 096 761 1 set
Cover profile
• Length 1000 mm
• Plastic
Reference line
Article Order no. PU 9,5
2-door 3-door 36 13 ø5,5
29
8,5 1,5
35
33
• For door centre distance of 36 mm 0 045 116 0 045 117 1 set min. 8
and max. door thickness of 28 mm 80
!
1
Bottom door-guide set STB 11 0 045 080 0 045 081 1 set 8 44,5
16 min. 70 ø5
• Without guide profile
12 24 19
Guide profile STB 11 32
5 Base height
1
• Length 6000 mm 0 046 419 4 32 54 20,5 22 11,5 min. 70
72
3000 mm 0 071 117 4
• Aluminium silver anodised
Bottom door-guide set STB 12 0 045 082 0 045 083 1 set 8 28,5
16 min. 70 25
• Without guide profile
Guide profile STB 12 50 24,5
54 Base height
• Length 6000 mm 0 046 420 4 19 min. 95
32 54 1 5
3000 mm 0 071 116 4 56 11,5
• Aluminium silver anodised
! max. 21
3
2
8
max. 21
24,5 ! max. 28
3
2
8
max. 28
24,5
min. 8 min. 8
pcs pcs
Top Line 22 runner for front door
each 2 each 2
• With 2 stop pins and
lift-off guard
• Plastic rollers
Centre stop
with steel ball bearing
• Galvanized steel • For front door
• For fixing with wood screw
3,5 mm dia. x 20 mm
• Grey plastic
pcs pcs
2 2
pcs pcs
Top Line 22 runner for rear door
1 2
• Without stop pins
• Plastic rollers
with steel ball bearing
• Galvanized steel
pcs pcs
1 2
32 32 32
1 3 2
43,2 43,2
95 55
22
55 64 32 24,5
8,5 20,5
Bottom door-guide set STB 12 0 045 082 0 045 083 1 set 22 8 28,5
16 92 25
• Without guide profile
Guide profile STB 12 24,5
50 54 Base height
• Length 6000 mm 0 046 420 4 19 min. 95
32 54 1 5
3000 mm 0 071 116 4 56 11,5
• Aluminium silver anodised
3 2
! 3 2
8
!
max. 28
24,5
min. 8 max. 21
min. 8 max. 28
51,5
39,6
48
!
Cover profile
Toolless unhinging
safety device,
front door
Runner profile
Spacer
Stop
(optional installation)
Reference line
Article Order no. PU
EB 36
2-door 3-door EB 29
41,5 10
50
Top door-runner set Top Line 22 32 ø5 17-19
39,6
3 19
• For door centre distance of 29 mm 0 045 511 0 045 512 1 set 8
48
19
and max. door thickness of 21 mm 54 64
80
• For door centre distance of 36 mm 0 045 513 0 045 514 1 set 5 51 64
and max. door thickness of 28 mm
• Without runner profile 20
1
Runner profile Top Line 22 47
20 50
• Length 6000 mm 9 080 207 4
3000 mm 9 080 208 4
• Aluminium silver anodised
Cover profile
• Length 1000 mm
• Plastic brown 0 046 418 1
silver-grey 0 041 184 1
For system parts, see page 4.1.31
Bottom door-guide set STB 11 0 045 080 0 045 081 1 set 16 min. 70
8 44,5
!
ø5
• Without guide profile
12 24 19
Guide profile STB 11 32
Base height
1 5
• Length 6000 mm 0 046 419 4 32 54 20,5 22 11,5 min. 70
72
3000 mm 0 071 117 4
• Aluminium silver anodised
Bottom door-guide set STB 12 0 045 082 0 045 083 1 set 8 28,5
16 min. 70 25
• Without guide profile
Guide profile STB 12 50 24,5
54 Base height
19 min. 95
• Length 6000 mm 0 046 420 4
32 54 1 5
3000 mm 0 071 116 4 56 11,5
• Aluminium silver anodised
51,5
39,6
48 !
Cover profile
Toolless unhinging
safety device,
front door
Runner profile
Framed door runner,
front door
Stop
Top Line 22 top door-runner fitting set for sliding framed doors
• For door centre distance of 29 mm and max. door thickness of 21 mm 0 045 498 0 045 499 0 045 510 1 set
• For door centre distance of 36 mm and max. door thickness of 28 mm 9 080 204 9 080 205 9 080 206 1 set
• Without runner profile
Runner profile Top Line 22
• Length 6000 mm 9 080 207 4
3000 mm 9 080 208 4
• Aluminium silver anodised
Cover profile
• Length 1000 mm
• Plastic brown 0 046 418 4
silver-grey 0 041 184 4
For system parts, see page 4.1.33 Reference line
EB 36
60 105 EB 29
41 64 32 5,5 47,5 9
57 14
11,2 11,2
43,2
5 32 32 50
64
32 (7) 35 32 9 ø5 17-19
47
20 50 39,6
32 32 48
min. 8 41 41 64 32
5 8
60 17
Bottom door guide
!
Article Order no. PU
2-door 3-door
EB 36
EB 29
Bottom door-guide set STB 11 0 045 080 0 045 081 1 set 22 8 44,5
16 92 ø5
• Without guide profile
12 24 19
Guide profile STB 11 32
5 Base height
1
• Length 6000 mm 0 046 419 4 32 54 20,5 22 11,5 min. 70
72
3000 mm 0 071 117 4
• Aluminium silver anodised
Bottom door-guide set STB 12 0 045 082 0 045 083 1 set 22 8 28,5
16 92 25
• Without guide profile
Guide profile STB 12 24,5
50 54 Base height
19 min. 95
• Length 6000 mm 0 046 420 4
32 54 1 5
3000 mm 0 071 116 4 56 11,5
• Aluminium silver anodised
Freedom of movement
for small and large cabinets
Top Line 25/27/1 are universal sliding door fittings • For 1, 2 or 3 sliding doors
designed especially for bedroom use. The sliding doors • Straightforward cabinet design
can be combined with various dual-track guide systems
• For wooden doors
for a variety of plinth versions, to suit the particular
furniture environment. • Optionally combinable with soft-closing Silent System
(Top Line 25/27)
• Inset design
Technical brief:
• Max. door weight 25 kg/door
(Top Line 25/27)
• Max. door weight 50/75 kg/door
(Top Line 1)
• Door width from 500 mm
• Can be combined with bottom guide
STB 11, STB 12, STB 15 or STB 35
• Runners with dual ball bearing plastic rollers ensure easy, quiet action. The runners
with oblong holes permit easy door height adjustment of ± 1.5 mm.
• The runner profiles are mounted to the cabinet top behind a trim panel.
The runners are provided with screw holes or pre-mounted press-in mounts.
A retaining screw prevents the door from lifting off unintentionally.
• Stops buffer the door on the runner and keep the doors closed in the end position.
If a centre stop is used, the front door can be moved to either side.
• With Top Line 27, spacers with bumpers ensure that doors are laterally separated
by a minimum distance.
Top Line 25 for 1-door cabinet Top Line 27 for multi-door cabinet
Either STB 11, STB 12, STB 15 or STB 35 can be used as the bottom door guide:
For bases with deep recess For bases with shallow recess For a flush plinth For an inset door guide
Set contains:
2 dampening units right/left, grey plastic
2 activators right/left, grey plastic/black
Reference line
Article Order no. PU 26
32 21 ø5
1-door
18
30 4
38
16
50
11 ø10
32
16
Top door-runner set Top Line 27 0 026 082 0 026 083 1 set min.30
min. 30 28,5
• Without runner profile
Runner profile Top Line 27 0 046 417 4
!
• Length 3500 mm
• Aluminium silver anodised
For system parts, see page 4.1.42
Bottom door-guide set STB 11 0 045 080 0 045 081 1 set 8 44,5
min.85
min. 85
ø5
• Without guide profile
Guide profile STB 11 24 19 32
• Length 6000 mm 0 046 419 4 32 5
50 22 11,5
72 20,5 Base height
3000 mm 0 071 117 4 min. 70
• Aluminium silver anodised
Bottom door-guide set STB 12 0 045 082 0 045 083 1 set 8 28,5
min.8585
min. 25
• Without guide profile
Guide profile STB 12 24,5
50
54
• Length 6000 mm 0 046 420 4 19 Base height
32 min. 95
3000 mm 0 071 116 4 5
70 56 11,5
• Aluminium silver anodised
Stop right/left
• Plastic, self-colour
ø5
ø5
18
18 46,5
26 54
30 30
Countersunk
Senkkopf-
screw ø 3,5
schraube ø 3,5
Countersunk
Senkkopf-
screw ø 3,5
schraube ø 3,5
Runner
Top Line 25/27 Top Line 25 Top Line 27
4 4
32
min.
min.30
30 30 30
16 38 38
16 16
Height adjustment Height adjustment Height adjustment
± 1,5 ± 1,5 ± 1,5
ø10 min.55
min. 16
16 min. 55
min. 28,5
11
10 min. 8 10
50
32
Safety catch
Front door Rear door
15 220 Y 220 15
36 60 36 60 36
2 X 2
134 32 12,6 32 134
Size X Size Y
mm mm
16 30,5
18 32,5
19 33,5
Runner profile
Runner
Activator
Dampening system
Silent System
15 220
2 ø 6,3
31
ø10
30 32 15-16
ø5 10
ø 3,5
min. 50
Y 220 15
36 36
54
min. 100 18
32
32 50
X X 37
12,6 2
15 220 Y
36 60
1,5 Size X Size Y
mm mm
2
134 32 16 30,5
18 32,5
12,6 X X
19 33,5
Runner
front door
Activator
Runner front door
rear door
Dampening system
Silent System
Activator
rear door
Top Line 1
for 2 or 3 inset doors
• Load capacity max. 50 kg/door
• Load capacity max. 75 kg/door
with tandem runner
• The plastic rollers are fitted with ball bearings. The large roller
diameter and convex shape of the rollers ensure smooth, quiet
action.
• The runner profile is mounted to the cabinet top panel behind a
fascia panel. The runners are secured to the doors by special
fixing elements. A safety screw prevents the door from
unintentionally disengaging.
• Stops buffer the doors on the runner and keep the doors closed
in the end position. If a centre stop is used, the front door can be
moved to either side.
• Spacers with bumpers ensure that the doors are laterally Top Line 1 – load capacity max. 50 kg/door
separated by a minimum distance and prevent damage to the
handle profiles.
Either STB 11, STB 12, STB 15 or STB 35 can be used as the bottom door guide:
For bases with deep recess For bases with shallow recess For a flush plinth For an inset door guide
48
Top door-runner set Top Line 1
• Load capacity 50 kg/door
45 56
• Without runner profile 0 045 076 0 045 077 1 set
Runner profile Top Line 1 ø5,5
64 min.40
min. 40 4
40 5
• Length 6000 mm 0 045 097 4
75 ø12 x 14 28
3000 mm 0 071 113 4
9 9
• Aluminium silver anodised 10
For system parts, see page 4.1.48
Top door-runner set 48
Sliding door fitting Top Line 1
• Load capacity 75 kg/door 45
56
• Without runner profile 0 045 078 0 045 079 1 set
ø5,5 min. 72
min. 72
Runner profile Top Line 1 64 4
40 5
• Length 6000 mm 0 045 097 4
75 ø12 x 14 28
3000 mm 0 071 113 4 9 9
!
• Aluminium silver anodised 10
Safety screw
Adjustable stop • Chromated steel
• With pad, self-closing feature
and brake
• Chromated steel 2 doors 3 doors
pcs pcs
4 6
2 doors 3 doors
pcs pcs Fixing element
2 2 • Height-adjustable
• For runner Top Line 1
min. 4
Blocks ø 12 x 14 mm
60-68 max. 12
• Chromated steel
2 doors 3 doors 20 ø7
40 ø5
pcs pcs Order no. PU
ø12 64
each 8 each 12 0 023 994 1/50 set
ø 5,5
ø 3,5 40
9
45 ø 12
. 50
min 64
14 min. 72 (75 kg)
48 min. 40 (50 kg)
Assembly door
Technical brief:
• Max. door weight 20 kg/door (Top Line 110)
Max. door weight 10 kg/door (Top Line 112)
• Max. door height 2000 mm (Top Line 110)
Max. door height 1500 mm (Top Line 112)
• Door panel width from 500 mm (Top Line 110)
Door width from 650 mm (Top Line 112)
• Toolless height adjustment
• Min. top-panel material thickness:
19 mm (TopLine 110)
16 mm (TopLine 112)
Order no. PU
9 040 230 4
Order no. PU
0 045 317 1 set
Set contains:
Bottom guide
• For wooden doors
• Plastic
Adapter for wooden doors
• Zinc-plated steel pcs
1 set
Bottom guide
• For alu frame doors
• Grey plastic
pcs pcs
4 2
Set contains:
2 dampening units right/left, grey plastic
2 activators, grey plastic/black
Order no. PU
9 079 731 1 set
88
2 161,5 37 2
15-16
18,5 31
28
15 220 220 15
49
T 16 T-5 16 220 15
1,5
15
4,5
12 12 9
50 32 56 32
ø3,5 37
ø3,5 88
T T
15 220 28
min. 19
12
32 50 ø3,5
min. 88
145 24
161,5
8,5 4
12
4
21,5 26
Order no.
! PU
0 044 798 4
Order no. PU
0 045 529 1 Set
Set contains:
pcs
4 Bottom guide
• For wooden doors
• Plastic
Adapter for wooden doors
• Zinc-plated steel pcs
1 set
Bottom guide
• For alu frame doors
• Grey plastic
pcs pcs
4 2
Set contains:
2 dampening units right/left, grey plastic
2 activators, grey plastic/black
Order no. PU
9 079 731 1 set
88
2 161,5 37 2
15-16
18,5 31
28
15 220 220 15
49
T-1 T-6,3
13,3 13,3
220 15
1,5
11,5
4,5
12 12 9
50 32 56 32
ø3,5 37
ø 3,5 88
T T
15 220 28
min. 16
12
32 50 ø 3,5
min. 88
24
145
161,5
12
Technical brief:
• Door weight:
max. 45 kg/door (Top Line 1200)
max. 80 kg/door (Top Line 1210)
max. 125 kg/door (Top Line 1230)
• Door thickness from 19 mm (Top Line 1200)
from 25,4 mm (Top Line 1210/1230)
69,8 39,7
Runner profile Top Line 1200 ø19
• Predrilled
• Length 3000 mm
• Aluminium 23,8
min.53,9
min. 53,9
max. 73
19 9,5
Order no. PU
0 048 291 5 44,4 28,6
Order no. PU
0 048 293 1 set
Set contains:
Runner Bottom guide
• Steel with nylon roller • Plastic, white
pcs pcs
2 2
! pcs
2
pcs
2
max.
max.95,2
95,2
Height adjustment
min.
25,4
6,3
19 4,7
Order no. PU
0 048 292 5
76,2 22,2
Order no. PU
0 048 294 1 set
Set contains:
Runner Bottom guide
• With mounting plate • Zinc
• Steel with nylon roller
pcs pcs
2 1
End stop
• With rubber stop
• Aluminium
pcs
2
max. 95,2
max. 95,2
6,3
17,5 4,7
Order no. PU
0 048 292 5 76,2 22,2
Order no. PU
0 048 295 1 set
Set contains:
Runner Bottom guide
• With mounting plate • Zinc
• Steel with nylon roller
pcs pcs
2 1
End stop
• With rubber stop
• Aluminium
pcs
2
Number of tracks 2 1 2
Slide Line 56
• max. 40 kg
Technical brief:
Slide Line 55
• Door weight max. 30 kg
with runner/guide profile in aluminium
• Door weight max. 15 kg
with runner/guide profile in plastic
• Guide components with spring-loaded bolt for easy
installation/removal
• Runner with ± 1 mm height adjustment
Slide Line 56
• Door weight max. 40 kg
• Runner and guide profile in aluminium
Order no. PU
Finish Order no. PU 0 046 641 1/100
white 0 001 468 1
brown 0 001 469 1
Press-in door stop/spacer
• For max. door weight of 15 kg
• 1 door stop/spacer is required for 2-door cabinet
• Brown plastic
Runner and guide profile
• For max. door weight of 30 kg Order no. PU
• Length 4000 mm
0 047 392 1/100
• Aluminium
Tungsten carbide tipped drill bit for Tungsten-carbide drill bit Hole dia. Order no. PU
guide component and press-in door stop for mm
• Shaft 10 mm, cylindrical Runner and guide 30 0 046 072 1
• For upright and hand drills only
Door stop 10 0 046 079 1
Set contains:
2 Soft-close units right/left
2 Activators
– 1 short activator (rear door) Bestell-Nr. VE
– 1 long activator (front door) 9 079 731 1 set
min. 88
161,5 37
28 18,5
15 220 220 15
49 220 15
1,5
4,5
12 12 9
50 32 56 32
ø3,5 37
min. 88
ø3,5
15 220 28
9
ø3,5
32 50 ø3,5
min. 88
145
161,5
4,5 10
ø30
1,5
9
11,5
ø10 Mounting
option
min. 40
42 min. 6
+1 -1 9 2,6
ø30
21 4,5
10 4,5
1,5
Height-adjustable
runner
3,4
7,5
6 24
42
ø30
max. 30kgkg
Max. 30
Max. 10 kg
max.1515kgkg
Max.
ø30
Disassembly door
Runner
• Ball bearing roller 2 Sliding 3 Sliding
• Zinc-plated steel/ doors doors
plastic 2 2
Centre stop
2 Sliding 3 Sliding
• For front door
doors doors
• Beige plastic
4 6
2 Sliding 3 Sliding
doors doors
- 1
Guide
• Zinc-plated steel/
plastic Spacer
• Brown plastic
Set contains:
2 Soft-close units right/left
2 Activators
– 1 short activator (rear door) Bestell-Nr. VE
– 1 long activator (front door) 9 079 731 1 set
161,5 37
18,5 28 49
15 220 220 15
220 15
1,5
6
12 12 9
50 32 56 32
37
ø3,5
ø3,5 49
15 220
32 50
ø3,5 ø3,5
min. 88
145 28
161,5
8,5
15
24
5
16 7
Guide
Spacer min. 6
48 Runner
32 64 min. 20 4
11
20
11 11
7,5
29
ø 3,5 x 30
29
Stop
Assembly note
First install guides loosely.
Insert door and push guides up into profile.
Tighten screws.
ø40
Assembly door
Slide Show
Slide Line 66 is a fitting for single-track sliding doors - • Ideal for book cases and shelf systems
the perfect design feature for bookcases or shelf • Overlay configuration
systems.
• 1-track, bottom-running
The aluminium, wood and glass doors run close to • For aluminium, wooden and glass doors
the cabinet face and doors can be positioned one
above the other. • Straightforward cabinet design
Technical brief:
• Door weight max. 10 kg
• Two doors can be positioned
above one the other
• Identical assembly top and bottom
• Concealed profile mounting
pcs
Order no. PU 2
0 020 143 4
Runner and guide right
Set for concealed runner-profile mounting • Zinc-plated steel
Order no. PU
0 020 144 1/10 sets pcs
2
Set contains:
Cylinder screw M5 x 10 mm
Bush for insertion
in runner profile Slide Line 66 • For runner and guide pcs
• Zinc-plated steel • Zinc-plated steel
8
pcs
1 ø 10 x 11 socket
for wooden door pcs
• For runner and guide 8
Screw-in dowel DU 644 • White plastic
• Steel self-colour
End cap
pcs • Silver-grey plastic pcs
1 4
Tungsten carbide tipped drill bit Tungsten-carbide drill bit for Hole dia. mm Order no. PU
for socket, Rastex 15 and DU 644
Socket 10 0 046 079 1
• For upright and hand drills only
Rastex 15 15 0 044 757 1
DU 644 8 0 046 081 1
End cap
pcs pcs
• Silver-grey plastic
1 4
Tungsten carbide tipped drill bit for Tungsten-carbide drill bit for Hole dia. mm Order no. PU
Rastex 15 and DU 644
Rastex 15 15 0 044 757 1
• For upright and hand drills only
DU 644 8 0 046 081 1
Assembly
Runner profile with countersunk screws
25 8 ø6
2,5 2,5
Countersunk screw
ø 4 x 40
ø6
11 8,4
5,5
min.
min.160
160 min.
min.160
160
40- 60 max.
max.250
250 max.
max.250
250 40- 60
ø8
25
12,5
ø15
max. 700700
max. max.
max.700
700
40 - 60
ø15
ø8 160
min. 160
250
max. 250
40 - 60
25
12,5 17,5
36,5
1
2
Grub screw
penetration depth min. 6,5 mm
11,2
5
ø10 11
19,5
2,5 32
Grub screw 42
penetration depth
min. 6,5 mm 1 6 25
49
2,5
19,5
32
28
49
ø 10
32
11 ø10
19,5
Max. 10
max. 10kg
kg
19,5
32
42
12,2
6-8
37,5 7
2,5
37,5
28
Cover cap
ø 19 19 Countersunk screw M5 x 11
Disc
ø19
37,5 Bush
6-8
max.10kg
Max. 10 kg
11,5 11,2
5
8
32
2,5
1 42
Grub screw
6 25
penetration depth
min. 6,5 mm
2,5
49
32
11,5
28 19,5
ø 4,0
-4,2 49
32
ø 4,0-4,2
for M5 thread 11,5
max.
Max. 10 kg
10kg
11,5
32
42
45
19,5
11,2
5
32
2,5
1 42
Grub screw
penetration depth 6 25
min. 6,5 mm
2,5
49
32
19,5
28 19
49
ø 4,0
-4,2
32
ø 4,0-4,2
for M5 thread 19,5
max.
Max. 10 kg
10kg
19,5
32
42
Technical brief:
• Door weight max. 25 kg
or 50 kg per glass door
• Suitable for glass panel thicknesses of 5, 6 and 8 mm
• Runner components with plastic sheathed ball
bearing
• Lockable by means of
Prestige 2000 cylinder push lock
Frame profile
Double guide profile Frame profile Frame profile
Dust guard
Dust guard and stop
and stop
Running part
Running part
Frame runner profile
Double runner rail
Frame profile
26 30
1 2
9 10
15 16
41
33
31
23
6,5
14,5
mm
2,5
b-5
b 11
mm
32,5
b-35
b 11
Mounting variant with If the inside cabinet width is an odd number, round it down to the next even number.
adapter 0 076 482 and
cylinder push lock 0 076 483 11 b
Glazing overlap
32 mm
b-65
mm
32,5
b-65
b 11
Slide-in profile
• Length 5000 mm
• Transparent plastic
For glass panel thickness mm Order no. PU Slide-in profile Slide-in profile
Order no. Order no.
5 0 076 473 4 0 076 473 0 076 474
6 0 076 474 4
8,5
8,5 8,5
8,5 8,5
8,5
Running component
Order no. PU
0 076 481 1/10
Number of doors 1 2
Technical brief:
• Door weight max. 15 kg
• Door height 400 - 700 mm
• Door width max. 1500 mm
• Length of runner profile 2500 mm
(can be shortened as required)
• Runner profile in aluminium
• Counterweight in individually selectable materials
runs behind the cabinet rear panel
Profile length
2500 mm max.
adaptable
to any situation
Travel can be
adapted to any
situation
Note:
35 35 The counterweight
max. Door width 1500 mm and door weight
(including handle)
Vertico Mono set Exterior width must be identical
Order no. PU
0 045 315 1 set
For system parts, see page 4.3.5
Cover profile for runner profile left/right Cover profile to cover cord at side
• Length 2500 mm • Length 600 mm
• Aluminium silver anodised • Aluminium silver anodised
Attention!
Attach cover profile to cabinet using any
standard adhesive.
Screw-on plates
• For wooden doors
• For alu frame doors,
width 45 and 55 mm
• Zinc-plated steel
pcs
4
Direct fixing screws with
fillister head ø 6,3 x 13,2 mm
• For wooden doors
pcs
8
!
Screw-on plates Self tapping screws ø 3,5 x 9,5 mm
• For alu frame doors, • For alu frame doors
width 19 mm
• Zinc-plated steel pcs pcs
4 8
Side Side
min. 16 min. 16
ø 6,3 x 13 18
7,5 7,5
ø5 21,8 ø 5 21,8
34,5 36,5 34,5
2 ø5
35
35
ø 6,3 x 13 ø 6,3 x 13
Mounting application
Wooden door Aluminium framed door,
width 19 mm
Side Side
min. 16 min. 16
ø 6,3 x 13
18 ø 3,5 x 9,5 12
7,5 7,5
ø 5 21,8 ø 5 21,8
34,5 36,5 34,5 36,5
ø5 2 ø 2,9
2
35 35
ø 6,3 x 13 ø 6,3 x 13
Side Side
min. 16
min. 16
18
ø 3,5 x 9,5 ø 3,5 x 9,5 18
7,5 7,5
ø 5 21,8 ø5
21,8
34,5 36,5 34,5 36,5
ø 2,9 ø 2,9
2 2
35 35
ø 6,3 x 13
ø 6,3 x 13
40 13 - 25 Counterweight
Back panel
40
25
60
ca. 100
10
ø10 x 11,5
15
ø30 x 9
ca. 100 10
max. 696
max.
2500
ø6,5 ø 4,6
60
30
-
80 21,8
12,3
Front ausrichten
und Schrauben
fest anziehen!
Slightly tighten
the screws
Mounting of counterweight on
cabinet and mounting of cord
12 7,5
32 11
7
ø8
40
Technical brief:
• Door weight max. 15 kg/Door
• Door height 300 - 600 mm
• Door width max. 1500 mm
• Length of runner profile: min. 1200 mm
max. 2500 mm
• Runner profile in aluminium
Travel
Note:
The upper door acts as
the counterweight for the
35 Door width 35 lower door.
Both doors must be of
Exterior width identical weight.
Door height Travel Exterior width Length of runner profile mm Order no. PU
mm mm mm max. min. overlay inset
300 – 400 300 up to 1500 2500 1200 0 020 383 0 020 392 1 set
350 – 400 350 up to 1500 2500 1400 0 020 384 0 020 393 1 set
400 – 600 400 up to 1500 2500 1600 0 020 386 0 020 395 1 set
450 – 600 450 up to 1500 2500 1800 0 020 387 0 020 396 1 set
500 – 600 500 up to 1500 2500 2000 0 020 388 0 020 397 1 set
Side Side
Vertico Synchro Vertico Synchro
overlay 20 inset min. 16
min. 16
7,5 7,5
36,5 36,5
2
2
35 35
pcs pcs
1 1
Screw-on plates
• For wooden doors
• For alu frame doors,
width 45 and 55 mm
• Zinc-plated steel
Direct fixing screws with
fillister head ø 6,3 x 13,2 mm
• For wooden doors !
pcs pcs
8 16
pcs pcs
8 16
pcs pcs
4 4
ø 4 x 40
2
2
35
35 35
ø 6,3 x 13 ø 6,3 x 13
Mounting application
Wooden door Aluminium framed door,
width 19 mm
Side Side
20 20
10 10
ø 4 x 40 ø 4 x 40
7,5 7,5
ø5 ø 2,9
2 2
35 35
Side Side
20 20
10 10
ø 4 x 40 ø 4 x 40
7,5 7,5
ø 2,9 ø 2,9
2 2
35 35
ø5 ø 2,9
ø 2,9
32 32
32
18 12
Door height
Door height Door height 18
top door
top door top door
H1 H1 H1
18 18
12
32
32 32
H2 H2
H2
Reveal approx. 2 mm Reveal approx. 2 mm Reveal approx.
for door buffer for door buffer 2 mm for
H3 H3 door buffer
H3
32 32
32
18 12
Door height
bottom door 18
Door height Door height
H4 bottom door H4 bottom door H4
18
18 12
32
32 32
ø 2,9
ø5 ø 2,9
10 12,3
30 - 80
ø 5,5 30 - 80
ø 4,8
ø9
Additional
Additional fixing fixing block
for runner profile for cover profile
ø 5,5 ø 4,8
30 - 80
ø9
ø 4 x 40
Bottom 30 - 80
12,3
10
Runner profile,
aluminium, silver anodised
2
Slightly tighten
the screws
Disassembly
21,7 12,3
ø 6,5
30 - 80
30 - 80
ø 4,8
ø 6,3 x 13
Additional
Additional fixing fixing block
for runner profile for cover profile
ø 4,8
30 - 80
ø 6,5
12,3
30 - 80 21,7
Bottom
ø 6,3 x 13
Runner profile,
aluminium, self-colour
1
1
2
Slightly tighten
the screws
Disassembly
Wing Line 780/780 Alu Wing Line 77 Wing Line 220 Wing Line 230 Wing 77
4.4.24 - 4.4.33 4.4.34 - 4.4.39 4.4.40 - 4.4.45 4.4.46 - 4.4.51 4.4.52 - 4.4.61
2 2 2 2 2 oder 4
max. 2200 mm
(Wing Line 780) max. 2400 mm max. 2400 mm max. 3000 mm max. 2400 mm
max. 1500 mm
(Wing Line 780 Alu)
max. 500 mm max. 500 mm max. 500 mm max. 600 mm max. 400 (500) mm
Technical brief:
• Door weight: Depending on the hinge
• Door panel height max. 2200 mm
• Door panel width max. 300 mm
• Opening angle up to 170°
• Guide bar with flat 10 mm profile
Order no. PU
0 074 658 1 set
Socket no. 33
Guide bar with base • ø 10 x 11 mm
pcs • White plastic pcs
• Nickel-plated steel
1 1
Order no. PU
0 071 648 1/10
Socket M5 x 11 mm
• For thread M5 and 10 mm ø10 ø10
Assembly Order no. PU
hole diameter
11 Folding door hinge screw on 0 046 787 1/10
• White plastic
For pressing in
Order no. PU with pre-mounted
0 078 920 1/200 10 mm dia. x 11 mm sockets 0 052 095 1/10
Tungsten carbide drill bit for socket no. 33 Tungsten-carbide drill bit Hole dia. Order no. PU
and folding door hinge for mm
• Shaft 10 mm, cylindrical Socket no. 33 10 0 046 079 1
• For upright and hand drills only
Folding door hinge 35 0 046 071 1
Examples of construction
Use an Intermat, Slide-on or Selekta Pro 2000 hinge for Door panel width min. max.
mounting the door on the cabinet. mm 200 250 300
With opening angles of 110°/125°, 165° and 180°, Wing Line
Hinge approx. min. cabinet depth in mm
170 permits unrestricted access to the cabinet interior
– see table. 110°/125° 400 370 340
Hinges/mounting plates must be ordered separately. 165° 370 350 320
– see group 3.
Selekta Pro 2000/180° 370 340 310
Opening angle
110°/125°
Guide bar
Stop
430
8,5
2 min. 12
min.12
min. 88 min.
min. Adjustment facility
min.
12
12
Hole for
ø 10 x 12
socket no. 33
±5
Guide bar
8,5
2 min. 12
min. 12
min. 8 min.
min.
12
12
Hole for
ø 10 x 12
socket no. 33
Technical brief:
• Door weight: Depending on the hinge
• Door panel height max. 1800 mm
(2200 mm with bottom guide)
• Door panel width max. 250 mm
• Ideal for use as bottom guide for
Wing Line 770/Wing Line 780
Order no. PU
0 071 648 1/10
ø10 ø10
11
Order no. PU
0 078 920 1/200
Order no. PU
0 046 071 1
2-panel door set Recommended door panel contours 2-panel folding door
for reducing risk of crushing
ca. R10 R10
Approx.
Pivot
20 40 19 offset 5,25 mm
Guide
1 - 5 Reveal depends on
the bumper used
Approx. R1 Intermat 9943
max. 250 Approx. R10 110°
max. 19 max.
max. 25
25
20-50
1 - 5 Reveal depends on
2-panel folding door the bumper used
max. door width 500 mm Radius as large as possible Folding door hinge
Door panel height from
800 to 1800 mm max. max. 25
19 max. 25
max.19
min.6060
min 1 - 5 Reveal depends on
the bumper used
Overlay Reveal
Drilling pattern
20
1 26,2
27 52
C
26,5 C Inside cabinet width
ø 35 x 11,5 Guide ø 35 x 11,8 5,5
10 52
50 32
25 16
1,25 27,5
Folding
door
hinge
625
Technical brief:
• Door weight max. 20 kg/door panel
• Door panel height max. 2200 mm
• Door panel width max. 500 mm
• Side-mounting with Intermat 9943/9936 Alu
fast-assembly concealed hinge
ø5
64 32
49
Tungsten carbide drill bit ø 35 mm for runner and guide Order no. PU
• Shaft 10 mm, cylindrical 0 046 071 1
• For upright and hand drills only
2-panel door set Recommended door panel contours Runner Pivot offset 5 mm
for reducing risk of crushing
20 40 ca. R10 R10
Approx.
Intermat 9943
110°
19
1 - 5 Reveal depends on
the bumper used
max. 500 Approx. R1
Approx. R10
20-50
max. 19 max. 25
min. 60
min. 60 1 - 5 Reveal depends on Guide
the bumper used
22,7
ø5-0,1
20
Runner
27 52
C
ø 35 x 11,5 47,5
64 ø 35 x 11,8 5,5
Intermat 9943
27 110°
C ø 35 x 11,5
64
32
Folding door hinge
32 32
B*
B* -2 / +2,5 mm
2 40 Reveal adjustment
facility
20 Guide 26,2
26,5
27 52
C C
ø 35 x 11,5
ø 35 x 11,8 Bottom panel
5,5
26,5
min. 55
Reveal mm 5 4 3 2 1 min. 15
2
1
5 mm
Intermat 9936 Alu hinges/mounting plates should be ordered separately – see page 4.4.22
Intermat
19,5 9936 Alu 95°
64 Intermat
9936 Alu 95°
Runner
64
26,5
min. 59,5
n. 59,5
26,2
min. 59,5 min. 59,5
min. 59,5
min.
min. 15
37 32
min. 59,5 min. 59,5
64 ø 2,5 32 32 ø 2,5
4,5 8,5
ø7
45∞
max. 2200
2200 max.
max. 2200
2200 19
19,5
Note:
ø10
45∞ For door heights > 1 m,
the glass panel must be
9,5 ø6 min. 59,5
min. 59,5
min. 59,5 bonded to the aluminium
28,6
profile with a
commercially available
28,6 9,5
adhesive.
max.500
max. 500 max.500
max. 500
Distance D Distance D
Side Overlay mm
Overlay
Cranking 9,5 mm 0 1 2 3 4 5
Distance D mm 6 5 4 3 2 1
Door Door
* Overlay adjustment ± 2,5 mm
2 x Reveal
H Door protrusion T/
Side
hinge protrusion H
66 for 0 mm distance
Cranking H T
95∞ mm mm mm Cranking mm Order no. PU
T 0 0 060 582 1/10
0 19,5 10,0
Door 9,5 29,0 19,5 9,5 0 060 683 1/10
Technical brief:
• Door weight max. 10 kg/door panel
• Door panel height:
max. 2200 mm (Wing Line 780)
max. 1500 mm (Wing Line 780 Alu)
• Door panel width max. 500 mm
• Side-mounting with Intermat 9943/9936 Alu
fast-assembly concealed hinge
Wing Line 780 set with bottom guide Wing Line 780 set without bottom guide
• For door heights up to 2200 mm • For door heights up to 900 mm
4 2
ø5
Guide
• For fast assembly
• With 3 guide rollers and 64 32
1 concealed hinge/spring
• Nickel-plated steel/
black plastic 49
Set Set
pcs pcs
1 –
Tungsten carbide drill bit ø 35 mm for runner and guide Order no. PU
• Shaft 10 mm, cylindrical 0 046 071 1
• For upright and hand drills only
2-panel door set Recommended door panel contours for reducing risk of crushing
Runner Pivot offset 5 mm
20 40 ca. R10
Approx. R10
Intermat 9943
19 110°
1 - 5 Reveal depends on
the bumper used
max. 500
500 Approx. R1
Approx. R10
1 - 5 Reveal depends on
2-panel folding door the bumper used
Panel width max. 1000 mm Radius as large as possible Folding door
Door weight/panel max. 10 kg hinge
25
Door panel height max. 2200 mm 19 max. 25
max. 19
min.
min. 60 1 - 5 Reveal depends on Guide
the bumper used
Countersunk screw
Bumper 30,5 ø4 x 16
20
Runner
47,5
27 52
C C
ø 35 x 11,5
ø 35 x 11,8 5,5 -2/+2,5 mm
Reveal adjustment
Intermat 9943 facility
110°
32 32 2 40
B*
B*
26,2
26,5
20
Guide
27 52 Bottom panel
C C
ø 35 x 11,5
ø 35 x 11,8 5,5 26,5
55
min. 55
Reveal mm 5 4 3 2 1 15
min. 15
2
1
5 mm
Wing Line 780 Alu set with bottom guide Wing Line 780 Alu set without bottom guide
• For door heights up to 1500 mm • For door heights up to 900 mm
Set Set
pcs pcs
12 8
Set Set
pcs pcs
Sheet metal screw 3,5 x 12 mm 1 –
Set Set
pcs pcs
4 4
Intermat 9936 Alu hinges/mounting plates should be ordered separately – see page 4.4.33
Intermat
9936 Alu 95°
19,5
7
16,5 15,5 Folding door
2-panel folding door hinge
Overlay Reveal = 4 mm
Calculation of door width/door panels
Door width = inside cabinet width + (2 x overlay*)
Door panel width = inside cabinet width – (1 x reveal) + (2 x overlay*) ÷ 2
Inside cabinet width
* Overlay: max. 15 mm
Bumper 30,5 ø4 x 16
Drilling pattern
22,7
12
min. 12 ø5 -0,1
min. 59,5
min. 59,5 min.
min. 59,5
59,5
Runner Intermat
9936 Alu 95°
47,5
-2/+2,5 mm
Reveal
adjustment
Folding door hinge
4,5 facility
17
ø 2,5
8,5
2 40
32
4
17,3
26,5
min. 59,5
26,2
min.15
min. 15
Glass cutting dimension = door width/height – 26 mm
H A
min. 59,5 min. 59,5
ø 2,5 32 32 ø 2,5
4,5 8,5 37
32
B
ø7
4
45∞
F F
max. 1500 max. 1500
19
19,5
Note:
ø10
45∞
For door heights > 1 m,
E the glass panel must
9,5 ø6 min. 59,5 be bonded to the
min. 59,5
28,6
aluminium profile with a
commercially available
28,6 9,5
adhesive.
G G
max. 500
max. 500 max. 500
Distance D Distance D
Side Overlay mm
Cranking 9,5 mm 0 1 2 3 4 5
Overlay
Distance D mm 6 5 4 3 2 1
Door Door
* Overlay adjustment ± 2,5 mm
2 x Reveal
H Door protrusion T/
Side
hinge protrusion H
66 for 0 mm distance
Freedom unlimited
Mounted to the cabinet side panel, Wing Line 77 is a • Suitable for use on tall, heavy doors in any
folding-door fitting that takes every last effort out of living-room and bedroom furniture
opening and closing heavy, tall doors. • For wooden doors
Wing Line 77 provides incredibly smooth, carefully • With guide profile on top panel
managed door movement that leaves no margin of • Includes Wing Line 26 bottom guide
doubt.
• Side-mounting with Intermat 9943
fast-assembly concealed hinge
• Cabinet design also suitable for hinged doors
Technical brief:
• Door panel weight up to 25 kg
• Door panel height max. 2400 mm
• Door panel width max. 500 mm
• ± 3 mm height adjustment
Tandem runner
• For fast assembly Guide
• Black plastic
• For fast assembly
• With 3 guide rollers
pcs and 1 concealed hinge/spring
1 • Nickel-plated steel/
black plastic
pcs
Support 1
with height adjustment (±3 mm)
• With 2 pre-mounted concealed
hinges
• Nickel-plated steel
Damping felt 4 mm
pcs
• Self-adhesive
1
pcs
2
Tungsten carbide drill bit ø 35 mm for runner and guide Order no. PU
• Shaft 10 mm, cylindrical 0 046 071 1
• For upright and hand drills only
Intermat C 48±3
9943 Lever to
110° Tandem rear
max. 500 runner 64
min. 55 26,5
Calculation of
door width/door panels min. 15
2 min.
Door width = inside cabinet Pivot offset 6 mm 40
(min. 35)
width + 2 17,3
(2 x overlay*)
26,5
Door panel width = inside cabinet Guide
width –
26,2
(1 x reveal) + Overlay Reveal
(2 x overlay*) ÷ 2
* Overlay: max. 15 mm, C value 6 mm
Inside cabinet width
ø 35 x 11,5
Drilling pattern 20
Runner Intermat 9943 C
110°
52
64 ø 35 x 11,8
5,5
27
B1* B2*
Clip-on centre
hinge 64
Hole spacing mm
C
*B1 10,5 11 11,5 12 12,5
ø 35 x 11,5 52
*B2 22,5 23 23,5 24 24,5 27
Guide
ø 35 x 11,8
Reveal mm 5 4 3 2 1 20
5,5
Technical brief:
• Door panel weight max. 25 kg
• Door panel height max. 2400 mm
• Door panel width max. 500 mm
• ± 5 mm height adjustment
pcs
1
Guide
• With 2 guide rollers and
1 concealed hinge/spring
• Nickel-plated steel
pcs
1
Tungsten carbide drill bit ø 35 mm for runner and guide Order no. PU
• Shaft 10 mm, cylindrical 0 046 071 1
• For upright and hand drills only
2-panel door set Recommended door panel contours for reducing risk of crushing
Runner
min. 60
60 1 - 5 Reveal depends on the bumper used
Drilling pattern
Runner
20 Intermat 9943
ø 35 x 11,5
110°
5,5
C ø 35 x 11,8
64 C
27 52
B1* B2*
Clip-on centre hinge
64
Hole spacing mm
5,5
*B1 10,5 11 11,5 12 12,5 20 ø 35 x 11,5 ø 35 x 11,8
C C
*B2 22,5 23 23,5 24 24,5 52
27 Guide
Reveal mm 5 4 3 2 1
Cabinet
The top panel design should be arranged so that the top panel does
not sag by more than 1,5 mm under the load of the folded doors.
A top panel reinforcement behind the runner profile is advisable.
Height adjustment
±5 mm
5 37 9
0,5
4 max. 23
min. 7,5
Runner C
±5
62
64
Height adjustment ± 5 mm
37 Centre panel
Folding door hinge
57
40,5
Guide
13
36 50
14
Assembly runner profile Assembly guide profile Preparing the door set
Technical brief:
• Door panel weight from 20 to 25 kg
• Door panel height max. 3000 mm
• Door panel width max. 600 mm
• 10 mm deflection compensated by
spring-loaded runner
Runner profile
• Screw-on version
• Length 2400 mm
• Aluminium anodised
and plastic-coated
Set contains:
Fixing screw
3,6 x 28 mm
• For runner profile
9 5 5
Runner carriage
• With runner support
• Chromated steel
left 1 1 – Buffer
right 1 – 1
• For cabinet shelf
• White plastic
2 1 1
Stop on
Intermat 9943 runner profile Intermat 9943
Runner 110°
110°
carriage
400 - 600
Overlay2: max. 4 mm
Runner
Stop on
cabinet shelf
19
1 - 5 Reveal depends on
the bumper used
Approx. R1
Approx. R10 5
5
max. 19 max. 25
Runner carriage
1 - 5 Reveal depends on
the bumper used
max. 19 max. 25
0 Reveal adjustment: 20 19
3 continuously from hairline
6
to + 4 mm. 80 ø5
Gradually adjusting the
68,7
52 pivot offset (0/3/6) allows
door offset to be set to
3, 6 or 12 mm.
5,5 ø35
Reveal adjustment
Pivot adjustment 11,5
35,5
320
ca.
320
ca.
5
19,
Freedom galore
Elegant, versatile and absolutely practical – that about • Suitable for any living-room and bedroom furniture
sums up Wing 77. • No attachment to cabinet side
The fitting can take 2- or 4-door panels, so that it's an • 2 or 4-panel door set
attractive way of saving space, for example, in bedrooms • For wooden doors
or in offices.
• With runner profile on top panel
The whole door set moves freely to and fro. There is also • Includes bottom guide
the option of linking several doors for even greater
convenience.
Technical brief:
• Door panel weight max. 20 kg (25 kg)
with 4 (2) door panels
• Door panel height max. 2400 mm
• Door panel width max. 400 mm (500 mm)
with 4 (2) door panels
• ± 3 mm height adjustment
• Centre panels recessed 40 mm
Wing 77 set
• For 1 folding door with 2 panels
Order no. PU
0 070 986 1 set
Outer guide
Set contains: • Chromated steel
End stop for runner profile • With 1 concealed hinge/spring
with bumper • Zinc-plated steel pcs
• Chromated steel pcs
bottom left 1
top left 1
bottom right 1
top right 1
Spacer
Tandem runner • For runners and guides with
pre-mounted screw M5 x 11
• For fast assembly
• Black plastic
• Black plastic pcs
pcs
2 4
Support with
height adjustment (±3 mm) End stop
• With 2 pre-mounted concealed • For guide profile
pcs
hinges/spring • Plastic
4
• Nickel-plated steel pcs
left 1
right 1 Countersunk screw
ø 4 x 16 mm
• For securing hinges and end stops
• Chromated steel
pcs
Clip-on centre hinge pcs 18
• Chromated steel 4
Mounting plate
Damping felt, 4 mm
• For clip-on centre hinge
• Self-adhesive
• Black plastic pcs pcs
8 4
Approx.
ca. R10 R10
160
19 Tandem
runner
1 - 5 Reveal depends on the bumper used
max. 500
Approx. R1
Approx. R10
20-50 25
19 max. 25
max.19
max.
Clip-on
1 - 5 Reveal depends on the bumper used centre hinge
2-panel folding door
Panel width max. 1000 mm
Door weight/panel max. 25 kg Radius as large as possible
Door panel height max. 2400 mm
max. 19 max. 25
25
min.
min.60
60 1 - 5 Reveal depends on
the bumper used
Outer guide
Drilling pattern
ø 35 x 11,5
20
Tandem runner
C
64
27
End stop
Tandem runner pcs
pcs • For guide profile
• For fast assembly 4
• Plastic
• Black plastic 4
Spacer spindle
for tandem runner
pcs
• Complete with screws
• Chromated steel 1
Support with
height adjustment (±3 mm)
Centre guide, complete
• With 2 pre-mounted concealed
hinges/spring • Chrome-plated steel
• With 2 concealed hinges/spring pcs
• Nickel-plated steel pcs
• Nickel-plated steel 1
left 2
right 2 Latch plate pcs
• Black plastic 2
min.
min.60
60 1 - 5 Reveal depends on
the bumper used Outer guide Centre
guide
Overlay Reveal
Drilling pattern
C C* C
64 64 64
27 27 27
Internal
height + Clip-on centre 15 ø 10 x 11,5
B* Latch plate B*
Panel hinge
thickness
– 13
64 64
32
C*
C C
ø 35 x 11,5 ø 35 x 11,5 ø 35 x 11,5
Outer guide
27 27 Centre guide 27
min. 27
min. 27
20 20 20
Cabinet
The inside cabinet width should not exceed 800 mm.
The maximum deflection of the top panel under load of the folded
door sets should not exceed 1,5 mm. If necessary use a stiffening 3
strip to reduce the deflection. * 0 position
Damping
Height adjustment
To dampen the doors on the cabinet, the packing units with spindle
contain felt bumpers which must be positioned at the top
and bottom of each door panel. Note:
Assembly and disassembly
only possible in 0 position*,
i.e. with 3 mm clearance
8 17,25 32 17,3 37
Bumper
1 ø5
±3 Stop
13 48
Lever ø35
5 End stop
Lever
3 Tandem runner 11,5
64
Spacer 2 panels
"X" spacer
2 40
Spacer spindle
4 panels
Clip-on centre
hinge Latch plates
13
35 26,5
m min. 62
5 13
Stop attachment
Guide Adjustable reveal
Centre guide min. 45
min. 45
± 1 mm
Door combinations
Door combinations on continuous runner
and guide profiles are achieved by mounting
Spacer ”X” (fixed reveal) to the runners and
guides.
Assembly spacer
Door/door-frame
material wood wood
wood/aluminium
Technical brief:
• Door weight max. 20 kg
• Door height max. 2600 mm
• Door width 400 - 600 mm (no door protrusion)
• Door width max. 700 mm (door protrusion 100 mm)
• Installation depth min. 60 mm
• Three-dimensional front adjustment
(Height + 4 mm, Side ± 2 mm, angle + 4 mm)
Cabinet design
A
A
B 60
332
A B
C
550
Inside cabinet
height
B max. 2570
332
max. 20 kg
Overlay
Inside cabinet width Size mm
mm A B C D 20,5 + Overlay
400 - 475 398 154 257 273
475 - 700 475 196 332 348 64
D + Overlay ø8 x 11
16 - 30
T
P = Clearance for T = Door thickness 16 - 26 mm
projecting handles P
min. 2 mm
ø8 x 13
12 M6 x 45
36
172
18
14
32
ø8 x 13
L
H
H -76
172 ø8 x 13
ø8 x 13 36
12
M6 x 45
M6 x 16
M6 x 12
M6 x 12
M6 x 16
Command performance!
KA 5740 is a pocket sliding door fitting for doors that • Smooth action and high side stability through
slide out of sight into the cabinet, to lie flat along its precision slide
sides. A stroke of genius and ideal for TV and hi-fi • Can be used in combination with
furniture, or a cocktail cabinet conjured up from concealed hinges and blind panel hinges
nowhere and made to disappear again.
• Mounting situation with Intermat 9935/9936
Using an optional fascia hinge hides the mechanism
fast-assembly concealed hinge
completely from view.
see page 4.5.10
Technical brief:
• Door weight max. 14 kg
• Door height max. 1800 mm
• Door width 300 - 700 mm
• For max. door thicknesses of 22,5 mm and 32 mm
• With roll-out prevention
• Chromated steel
Internal
cabinet X Door height 48
height b3
b4
b5
b6
Min. cabinet depth*
Y = Door thickness + 50 mm
F
Article Size mm
Door width b1 b2 b3 b4 b5 b6
Door height = internal cabinet height - 6 mm
KA 5740/300 302 206 272 - - 300
Door width = internal cabinet width - 6 mm KA 5740/350 352 256 304 - - 350
X = door height - 2 x E
KA 5740/400 402 306 368 - - 400
KA 5740/450 452 356 144 304 400 450
KA 5740/500 502 406 176 336 464 500
KA 5740/550 552 456 208 368 528 550
KA 5740/600 602 506 240 400 560 600
KA 5740/650 652 556 272 432 624 650
KA 5740/700 702 606 304 464 656 700
900
-
1800
600
-
900
600
Recommended quantity
of KA 5740 pocket sliding-door fittings
depends on door height.
80 88
X+
Door stop/spacer
9,8
Panhead screw ø 4
Panhead screw ø 4
Door stop/spacer
ø 10 mm
Order no. PU
9 079 526 1 set
• Screw-on version
• Cup diameter 35 mm ø 35
max. 25,5 12
• Steel cover cap for cranking 0 mm
max. 8 3
80
• Screw-on version
• Cup diameter 40 mm ø 40
• Steel cover cap max. 32 G
for cranking - 5 mm
max. 12 3
-0,2
26
80
ø 35
• Doors of 16 mm and over in thickness and up
to 2600 mm in height can be straightened.
12,5 deep The adjustment fitting can also be used to
Housing with prevent doors from warping.
left-hand threaded rod
• It is recommended to use 2 fittings per door.
• The fixture is simple and straightforward. A pair
of threaded rods, one with a right-hand thread
and one with a left-hand thread, are fed into a
!
clamping sleeve. Each of the threaded rods is
also supported in a housing that slots into a 35
Plastic or aluminium mm hole where it is screwed into place.
cover strip
• Rotating the clamping sleeve produces tensile
or compressive stress that is used to correct
Plastic cover plate warping or bowing.
11
1920 • Housing, clamping sleeve and threaded rods are
provided with a cover to prevent damage to
Clamping sleeve wardrobe and clothing.
8 deep
!
Housing with
right-handed threaded rod
max.
21
!
1 clamping sleeve 2 cover strip holders
Accessories 4.6. 1
Brush sealing strip, distance roller
and roof pitch adapter
Rear door
Front door
Order no. PU
0 026 453 40
Distance roller
Centre panel
• For tall sliding doors
ø5
Cabinet
46
Euro screw
countersunk
Rear door 28
Front door
Order no. PU
0 027 740 1/10
59∞
19∞
max. 500
kg
50
Order no. PU
0 045 319 1/5 sets
19∞ - 59∞
ø min. 12 mm
26
45 32
Reveal min. 2 mm
Accessories 4.6. 3
4.6. 4 www.hettich.com