Professional Documents
Culture Documents
Features General Description: Low Noise Jfet Input Operational Amplifiers
Features General Description: Low Noise Jfet Input Operational Amplifiers
• Low Power Consumption The JFET-input operational amplifiers in the TL072 are similar to
• Wide Common-Mode and Differential Voltage Ranges the TL082, with low input bias and offset currents and fast slew
• Low Input Bias and Offset Currents rate. The low harmonic distortion and low noise make the TL072
• Output Short-Circuit Protection ideally suited for high-fidelity and audio preamplifier applications.
• Low Total Harmonic Distortion…0.003% Typ Each amplifier features JFET inputs (for high input impedance)
coupled with bipolar output stages integrated on a single
• Low Noise Vn= 18nV ΗΖ Typ at f=1kHz monolithic chip.
• High Input Impedance…JFET-Input Stage
• Internal Frequency Compensation
• Latch-Up-Free Operation
• High Slew Rate…13V/μs Typ
• Common-Mode Input Voltage Range Includes VCC+
• SOP-8L: Available in “Green” Molding Compound
(No Br, Sb)
• Lead Free Finish/ RoHS Compliant (Note 1)
Applications
• Active filters
• Audio pre-amps
Ordering Information
TL 072 S G - 13
Pin Assignments
OUTPUT1 1 8 VCC+
INVERTING INPUT1 2 7 OUTPUT2
TL072
NON-INVERTING INPUT1 3 6 INVERTING INPUT2
VCC- 4 5 NON-INVERTING INPUT2
SOP-8L
Pin Descriptions
Block Diagram
Maximum Peak Output Voltage vs Supply Voltage Maximum Peak Output Voltage vs Temperature
15.0
RL=10kΩ RL=10kΩ
12.5 TA =25℃ 12.5
RL=2kΩ
10.0 10.0
7.5 7.5
5.0 5.0
0.0
0 0.00
0 2 4 6 8 10 12 14 16 18 -50 -25 0 25 50 75 100
T A-Free Air Temperature (℃ )
|Vcc±| Supply Voltage (V)
Maximum Peak Output Voltage vs Load Resistance Maximum Peak Output Voltage vs Frequency
15.0 15.0
VOM -Maximum Peak Output Voltage(±V)
7.5 7.5
2.5 2.5
0.0
0 0
0.0
0.1
10 0.2 0.4 0.7 100
1 2 4 71000
10
100 1k 10k 100k 1M 10M
Load Resistance (kΩ)
Frequency (Hz)
Maximum Peak Output Voltage vs Frequency Maximum Peak Output Voltage vs Frequency
15.0 15.0
VOM -Maximum Peak Output Voltage(±V)
VCC±=±10V
7.5 7.5 TA =85℃
5.0 5.0
VCC±=±5V
2.5 2.5
0
0.0 0.0
0
100 1k 10k 100k 1M 10M
10000
10k 40k 100000
100k 400k1000000
1M 4M 10000000
10M
Frequency (Hz) Frequency (Hz)
100.00
100 1000
VCC±=±15V
400
200
IIB -Input Bias Current(nA)
10.00
10
100
100.0
40
1.001
20
10
10.0
VCC±=±15V
0.10
0.1
4 VO=±10V
2 RL=2kΩ
0.01
0.01 1.01
-50 -25 0 25 50 75 100 -50 -25 0 25 50 75 100
TA-Free-Air Temperature (℃)
TA-Free Air Temperature (℃)
2.0 2.4
1.8 2.2
2.0
1.6
1.8
1.4
1.6
1.2 1.4
1.0 1.2
0.8 1.0
0.6 0.8
TA =25℃ 0.6
0.4 VCC±=±15V
No Signal 0.4
0.2 No Signal
No Load 0.2 No Load
0
0.0 0
0.0
0 2 4 6 8 10 12 14 16 -50 -25 0 25 50 75 100
|Vcc±| Supply Voltage (V) TA-Free Air Temperature (℃)
150 98
VCC±=±15V
PD -Total Power Disspation(mW)
97 RL=10kΩ
125
96
100
95
75 94
93
50
92
VCC±=±15V
25
No Signal 91
No Load
0 90
-50 -25 0 25 50 75 100 -50 -25 0 25 50 75 100
TA-Free Air Temperature (℃) TA-Free Air Temperature (℃)
Voltage-Follower
Equivalent Input Noise Voltage vs Frequency
Large-Singnal Pulse Response
6
Vn - Equivalent Input Noise Voltage(nV/√ Hz)
50 Input
VCC±=±15V VCC±=±5V
AVD=10 4 RL=2kΩ
10
-4
0 -6
10
10 40 100 400 1000
1k 4k 10000
10k 40k 100000
100k -0.5 0 0.5 1 1.5 2 2.5 3 3.5
Frequency (Hz) t-Time-μs
11 28
VCC±=±15V
0.4 Overshoot
AVD=1 24
Total Harmonic Distortion(%)
VI(RMS)=6V
VO -Output Voltage(mV)
20
TA =25℃ 90
0.1
0.1
16
0.04
12
8
0.01
0.01
VCC±=±5V
4
0.00 RL=2kΩ
10%
0 TA =25℃
tr
0.001
0.001 -4
100
0.1 400 1k
1 4k 10k
10 40k 100k
100 -0.1 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7
Frequency(Hz) t-Elapsed Time-μs
Test Circuit
10kΩ
1kΩ
V
OUT OUT
V
CL=100pF RL=2kΩ RL CL=100pF
Marking Information
(1) SOP-8L
( Top View )
8 5
Logo G : Green
TL072 YY : Year : 08, 09,10~
Part Number
YY WW X X WW : Week : 01~52; 52
represents 52 and 53 week
X : Internal Code
1 4
3.85/3.95
5.90/6.10
0.254
0.10/0.20
Gauge Plane
Seating Plane
0.62/0.82
Detail "A"
7°~9° 7°~9°
0.35max. 45°
0.15/0.25
1.30/1.50
1.75max.
Detail "A"
0°/8°
1.27typ 0.3/0.5
4.85/4.95
8x-0.60
5.4
6x-1.27
8x-1.55
IMPORTANT NOTICE
DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS
DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other
changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability
arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any
license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described
herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies
whose products are represented on Diodes Incorporated website, harmless against all damages.
Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized
sales channel.
Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall
indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees
arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.
Products described herein may be covered by one or more United States, international or foreign patents pending. Product names
and markings noted herein may also be covered by one or more United States, international or foreign trademarks.
LIFE SUPPORT
Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without
the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:
2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided
in the labeling can be reasonably expected to result in significant injury to the user.
B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected
to cause the failure of the life support device or to affect its safety or effectiveness.
Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or
systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements
concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems,
notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further,
Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes
Incorporated products in such safety-critical, life support devices or systems.
www.diodes.com