Use a split pin, craft rivet Each Emplacement is 40x40mm
or small magnet to mount (That’s the same size as a small ship)
the turbolaser guns on these bases. These look great if you cut out the barrels, but you don’t have to.
You may need to trim
connector edges for best interlocking fit. You may need to trim connector edges for best interlocking fit. Trim station tiles down to the grey Trim station tiles down to the grey Trim minefields to red circle Trim minefields to red circle Trim minefields to red circle Thi s You tile i ma s pl yw a ant ced a to r lo oun ng a d it b s c oard orn e ers dge. slig htly . This tile is placed along a board edge. You may want to round its corners slightly. These tiles are placed along board edges. You may want to round these corners slightly.