You are on page 1of 8

PATTERN KITTEN MISHA

SPECIAL HALLOWEEN
Abbreviations:

 ch = chain stitch
 dec = decrease
 FO = fasten off
 inc = increase
 mm = millimeter(s)
 mr = magic ring
 sc = single crochet
 sl st = slip stitch
 rep = repeat
 rnd(s)= round(s)
 * * x…= repeat instructions in asterisks … times
 Continuous round: Knit all followed, without closing
the rounds.
 Joined round: Go closing every rounds and climb to
the next turn with a chain.

Materials:
 Yarn (for crochet hooks 3-3.5 mm/~
2mm wide)
 Thread (to embroider cat's mustache)
 Felt
 Fiberfill (to stuff)
 Textile Glue (for glue some parts of felt)
 Jingle Bells (~6mm diameter)

Tools:
 2,0 mm Crochet Hook (Clover Soft Touch – US A/0 - UK 14)
 2,5 mm Crochet Hook (Clover Soft Touch - UK 12)
 3,5 mm Crochet Hook (Clover Soft Touch - US E/4 - UK 9)
 Yarn Needle (for sew amigurumi parts)

This Pattern is an original pattern by Tarturumies © 2017. Translated by Alice C. and Tarturumies. Please mention the autor of the
pattern (Tarturumies) in the finished work. Prohibited sell the pattern or distribute it. www.tarturumies.com
1
PATTERN KITTEN MISHA
SPECIAL HALLOWEEN

HEAD Worked in continuous round - 3,5mm BODY Worked in continuous round - 3,5mm (continued "back legs")

Round Stitches Description Round Stitches Description Round Stitches Description

1 6 Magic Ring 1 6 Magic Ring 3-7 12 1sc in each st

2 12 6 inc. 2 12 6 inc. 8 6 6 dec.

3 18 *1 sc, 1 inc* x6 3 18 *1 sc, 1 inc* x6 9 - 10 6 1sc in each st

4 24 *2 sc, 1 inc* x6 4 24 *2 sc, 1 inc* x6 11 12 6 inc.

5 30 *3 sc, 1 inc* x6 5 - 11 24 1sc in each st 12 - 13 12 1sc in each st

6 36 *4 sc, 1 inc* x6 12 18 *2 sc, 1 dec* x6 14 6 6 dec.

7 - 11 36 1sc in each st 13 - 18 18 1sc in each st 15 3 3 dec.

12 30 *4 sc, 1 dec* x6 19 12 *1 sc, 1 dec* x6 Stuff the piece as you crochet. Fasten off, lea-
ving a long tail. Don't fill the thin side (that is, the
13 24 *3 sc, 1 dec* x6 20 - 23 12 1sc in each st ankle). In order to shape them into paws, star-
ting at the bottom of the feet, bring the long
14 18 *2 sc, 1 dec* x6 Stuff the body as you crochet. FO, leaving a
yarn tail with the needle and go through to the
long tail.
other side of the foot (the top), turning the
15 12 *1 sc, 1 dec* x6
needle while inside and bringing the needle to-
16 6 6 dec. wards the same point where you started (the
BACK LEGS x2 bottom) and continue to go through (adjusting
Worked in joined round - 3,5mm
Stuff the head as you crochet. FO, leaving a as you go) and repeat the same procedure
long tail. Round Stitches Description from the other side of the foot. Once both sides
have been completed, go from the bottom of
1 6 Magic Ring the paw all the way to the other side of the
thigh. Turn it a little in order to fold the foot/paw.
2 12 6 inc. Don't fasten off yet!

This Pattern is an original pattern by Tarturumies © 2017. Translated by Alice C. and Tarturumies. Please mention the autor of the
pattern (Tarturumies) in the finished work. Prohibited sell the pattern or distribute it. www.tarturumies.com
2
PATTERN KITTEN MISHA
SPECIAL HALLOWEEN
FRONT LEGS x2
Worked in joined round - 3,5mm (continued "front legs") TAIL Worked in joined round - 3,5mm

Round Stitches Description Round Stitches Description

1 6 Magic Ring procedure from the other side of the foot. On- 1 6 Magic Ring
ce both sides have been completed, go from
2-6 6 1sc in each st the bottom of the paw all the way back to the 2 9 *1 sc, 1 inc* x3
very top of the foot/paw. Turn it a little in order
7 9 *1 sc, 1 inc* x3 to fold the paw. Don't fasten off yet! 3-7 9 1sc in each st

8 - 13 9 1sc in each st 8 6 *1 sc, 1 dec* x3

14 6 *1 sc, 1 dec* x3 EARS x2 9 - 24 6 1sc in each st


Worked in joined round - 2,5mm

15 - 16 6 1sc in each st Stuff the tail as you crochet. FO, leaving a long
Round Stitches Description tail.
17 12 6 inc.
1 3 Magic Ring
18 - 19 12 1sc in each st
2 6 3 inc. COLLAR Worked in row - 2 mm
20 6 6 dec.
3 9 *1 sc, 1 inc* x3 Round Stitches Description
21 3 3 dec.
4 12 *2 sc, 1 inc* x3 21 20ch + 1ch for climb
Stuff the piece as you crochet. Fasten off, lea-
ving a long tail. In order to shape them into 5 12 1sc in each st 1 20 1sc in each ch
paws, starting at the bottom of the feet, bring Don't stuff. FO, leaving a long tail.
Fasten off, leaving a long tail. Sew the bell on-
the long yarn tail with the needle and go
to sc #10 (in the middle of the collar). Don't
through to the other side of the foot (the top),
turning the needle while inside and bringing the sew the ends together yet!
needle towards the same point where you star-
ted (the bottom) and continue to go through
(adjusting as you go) and repeat the same

This Pattern is an original pattern by Tarturumies © 2017. Translated by Alice C. and Tarturumies. Please mention the autor of the
pattern (Tarturumies) in the finished work. Prohibited sell the pattern or distribute it. www.tarturumies.com
3
PATTERN KITTEN MISHA
SPECIAL HALLOWEEN
HAT Worked in continuous round - 3,5mm (continued “hat”)

Felt Parts Round Stitches Description Round Stitches Description


Misha Parts 1 3 Magic Ring 22 60 30 inc.
Eyes x2 (diameter)
2 6 3 inc. 23 60 1sc in each st
13mm 9mm 1mm
3-6 6 1sc in each st Don't stuff. FO. Place the band around the
5mm hat and put the buckle centered with the ta-
Nose
7 9 *1 sc, 1 inc* x3 llest part facing vertically (see the picture).
4mm 4mm
Form the hat to your preference!
8 - 10 9 1sc in each st
Ears x2
15mm 15mm 11 12 *2 sc, 1 inc* x3

13mm 12 - 13 12 1sc in each st


Cheeks x2 (diameter) 6mm
14 18 *1 sc, 1 inc* x6
Hat Parts
15 18 1sc in each st
Strip 150mm
16 24 *2 sc, 1 inc* x6
9mm
17 30 *3 sc, 1 inc* x6
Buckle
3mm 11mm
18 24 *3 sc, 1 dec* x6

10mm 19 18 *2 sc, 1 dec* x6

20 24 *2 sc, 1 inc* x6

21 30 *3 sc, 1 inc* x6

This Pattern is an original pattern by Tarturumies © 2017. Translated by Alice C. and Tarturumies. Please mention the autor of the
pattern (Tarturumies) in the finished work. Prohibited sell the pattern or distribute it. www.tarturumies.com
4
PATTERN KITTEN MISHA
SPECIAL HALLOWEEN

PUMPKIN (continued “pumpkin”)

Round Stitches Description

BODY Worked in joined round - 3,5mm hook The body of the pumpkin: Continue stuffing as you go along and push the stuffing towards
the sides, leaving the center a bit more empty so that you can push it in a little at the top.
1 6 Magic Ring Fasten off, leaving a pretty long tail. With this same tail we're going to create the segments.
With the yarn, go through the center and pierce through the base, turning towards the bot-
2 12 6 inc.
tom so that a small cavity is formed in the center of the pumpkin (where we're later going to
3 18 *1 sc, 1 inc* x6 put the stem). Pull the tail out and then put it through the center at the top, going through
the base and repeat this in the same place once more (tighten the two stitches well to make
4 24 *2 sc, 1 inc* x6 sure that they accommodate both the stuffing and the segments. Repeat this 6 times, divi-
ding the pumpkin into 6 segments. Fasten off.
5 30 *3 sc, 1 inc* x6
The stem: Don't stuff. Fasten off, leaving a long tail, and use that tail to sew it into the space
6 - 12 30 1sc in each st at the top of the pumpkin. Fasten off.

13 24 *3 sc, 1 dec* x6

14 18 *2 sc, 1 dec* x6

15 12 *1 sc, 1 dec* x6

16 6 6 dec.

STEM Worked in joined round - 2,0mm hook

1 6 Magic Ring

2-5 6 1sc in each st

6 12 6 inc.

This Pattern is an original pattern by Tarturumies © 2017. Translated by Alice C. and Tarturumies. Please mention the autor of the
pattern (Tarturumies) in the finished work. Prohibited sell the pattern or distribute it. www.tarturumies.com
5
PATTERN KITTEN MISHA
SPECIAL HALLOWEEN

ASSEMBLE
1.– Sew the ears to the head between rows 3 8.– Sew the front legs to the body between
and 7 (counting from the top). rows 5 and 18 (counting from the top), one
next to the other (don't sew the feet, leave
2.– Assemble the eyes, gluing the pieces to-
them loose and fold them a bit to form them
gether (see the images) and then glue them
into legs)
to the head between rows 10 and 12
(counting from the top) and leaving 4sc. of 9.– Sew the tail to the body between rows 5
distance between them. and 6 (counting from the bottom) and cen-
3.– Glue the nose to the head at row 12 tering it in relation to the back legs.
(counting from the top) and centering them 10.– Sew the head to the body, centered.
in relation to the eyes.
4.– Glue the cheeks to the head between 11.– Place the collar on the neck with the jin-
rows 11 and 12 (counting from the top), one gle bell towards the front and sew the ends
to each side of the attached eyes (see ima- together in the back.
ges).
12.– Finally, place the hat on top, and if you'd
5.– Glue the interior triangles to the attached like it there permanently, sew it there!
ears (see images).
NOTE: If you don't want to glue the pieces of
6.– Embroider the whiskers with white thread
felt, you can sew them as an alternative!
to the head between rows 9 and 11
(counting from the top) to sides of both eyes
(see images).

7.– Sew the back legs to the body between


rows 5 and 10 (counting from the bottom).
Sew, following the thigh to the side (don't sew
the feet, leave them loose and fold them a
bit to form the leg like shape).

This Pattern is an original pattern by Tarturumies © 2017. Translated by Alice C. and Tarturumies. Please mention the autor of the
pattern (Tarturumies) in the finished work. Prohibited sell the pattern or distribute it. www.tarturumies.com
6
PATTERN KITTEN MISHA
SPECIAL HALLOWEEN

And you’re done! Enjoy your Sweet Kitten!

This Pattern is an original pattern by Tarturumies © 2017. Translated by Alice C. and Tarturumies. Please mention the autor of the
pattern (Tarturumies) in the finished work. Prohibited sell the pattern or distribute it. www.tarturumies.com
7

You might also like