Ree na ] EE]
Question Paper Code: 84165 albus
ea
MLE. DEGREE EXAMINATION, MAY/JUNE 2016
Elective
Structural Engineering
‘ST-7013— DESIGN OF STEEL CONCRETE COMPOSITE STRUCTURES
(Regulations 2013)
‘Time : Three Hours wm : 100 Marks
Answer ALL questions.
PART A (10x2~20 Marks)
|. Mention, some ofthe applications of te! conerete composite construction
2, Write shor nate on composite action.
3. Define effective flexural siftness
4. Lis the differnt type of shear connectors
5, What do you know about force transfer of composite members ?
6. Distinguish between laterally restrained and unrestrained beams.
7. What are the basic variables in choosing cross sections ofa box girder?
8. Draw a completed structure of tmpezoidal steel box girder,
9. Give two clasical examples of composite structure.
10. What is socond order effect?
06 1 84165a)
a)
PART —B (5x 16~ 80 Marks)
Discuss about the clastic behavior of composite beams with and without
interaction
oR
How will you understand the concept of steel concrete composite
‘construction ? Explain in detail steps
(What is the use of shear connectors ? Explain its types with net
sketches (19)
(ii) Write short notes sbout the installation of shear connectors 6
oR
(Explain the cost impacts of steel concrete composite constructions ®
Gi Explain the Mechanism of fatigue failure of composite structures with
eat figure ®
ion made of ISHB 300 encased in M30
sd The details of
Obtain plastic resistance of steels
concrete, The height of the column is 3 m and is pinned en
ven as the dimension of the column is 450mm x 450 rani
the section are
reinforcing steel Fe 415 ~ 0.59% of gross concrete area rr)
oR
Dosign a composite section without shores, for use as an interior floor beam.
Span of the beam -9m, spacing of beam ~ 3m, thinkness of slab = 120 mm, dead
load = 3 kNin?. Live load = 7.5 kNin, concrete strength = 25 MPa and
modular ratio ~9. (16)
(Elaborate the bending. torsion and distortion behaviour of box gird
bridge 6
ii) What are the basic variables required to make a cross section of b
Jers, Discuss in de 6
oR
Explain the step by step procedure involved in the design of box Girder Bridge. (16)
Explain about the seismic behavigr of composite connections
oR
Describe the detailing requirements Tor composite structure and give one
ructure collapsed due to poor loading