Professional Documents
Culture Documents
60 90
Procedure: 30 120
0 150 0
1. Closed the Switch(K). Set Input Voltage
Vin=220V. Open 50
2. Set power supply voltage (VS) at=0V. Keep Vin 2 3
1 4 90
60 90
all the resistance, Inductance, capacitance (in Volt) 0 5 30 120
220 60 90
at maximum position. 0 30 120 0 150
3. Adjust the voltage across the circuit (VS) Frequency 0 150
0.705 0
to about 70 V and note current(I), Vs, VL, (in Hz)
100 0
VC, VR and power(W) from the meters. 50 50 150 60 90 140
4. Adjust the rheostat for several settings and 0 200 30 120
Capacitive 0 Inductive
Observation Table
Serial no. Power Supply Vs Current I Power VR VL VC Theta
Power factor
of Observation (in Volt) (in Amp) (in Watt) (in Volt) (in Volt) (in Volt) (in degree)