Professional Documents
Culture Documents
RMX - Ozonic Read Me
RMX - Ozonic Read Me
Using a hardware controller with Stylus RMX gives you maximum control
over your groove production. You can edit, re-mix, and manipulate RMX
grooves instantly in real time. It’s powerful, fun, and musically rewarding!
There are two main steps to perform in order to get started; loading the data
for the M-Audio Ozonic, and selecting the template in Stylus RMX.
The Ozonic features a great collection of faders, knobs, and buttons. The
templates we have provided take full advantage of those features – every
control is used.
STEP 1 – SET UP THE OZONIC
Make sure you have installed the hardware and software for the Ozonic
according to M-Audio’s documentation.
The Ozonic holds twenty controller Presets. Ozonic Presets are stored in a
Preset Bank file (.xml extension).
We have provided a Preset Bank file that duplicates the M-Audio factory
Presets in the first nineteen slots, and has the Stylus RMX Preset in the
twentieth slot.
Once you have successfully transferred the Preset Bank, you will
need to recall Preset B10.
4. Click “Open”.
The Editor/Librarian now shows the following:
5. Click on the Update button to send the data to the Ozonic. After a few
seconds, the data transmission is complete.
Make sure you have Stylus RMX version 1.5 or above installed.
From the Stylus RMX Utility menu (the button denoted with a Floppy icon),
select MIDI Learn / Load Template.
Be sure that your host application is sending MIDI to RMX; then load grooves
into all 8 parts.
The table at the end of this document shows how the M-Audio Ozonic
hardware controls are mapped to Stylus RMX. Have fun exploring the
amazing features of Stylus RMX from your hardware controller!
The templates we have provided are only the beginning of what you can do
with your hardware controller and Stylus RMX. We’ve provided a blank table
for you to document your own Controller Template creations. You will find it
in the User Template Tools folder, which is located inside the MIDI Learn
directory on your hard drive.
We encourage you to create your own templates, and then share them at the
Yahoo Spectrasonics User Group:
http://launch.groups.yahoo.com/group/spectrasonics/
Best regards,
HARDWARE CONTROLLER:
M-AUDIO OZONIC
HARDWARE DATA FILE: HARDWARE PRESET:
Ozonic Part.ctl_rmx
Mixer levels, Solos, and Global parameters affect Parts 1-8. For all other parameters, the part you
control is determined by the host application track/MIDI channel.
TEMPLATE OVERVIEW:
• Sliders C1-C8 -> Mixer Level Part 1-8
• Slider C9 -> Master Level
• Buttons C32-C39 -> Solos (momentary)
• Button C40 -> Global Reverse (momentary)
• Button A27 -> Half Speed
• Button A28 -> All Stop
• Button A29 -> Global Chaos On/Off, Pattern Amt (momentary)
• Button A30 -> All Play
• Button A31 -> Double Speed
• Knob B10 -> Master Filter Tone
• Knob B11 -> Master Filter Emphasis
• Knob B12 -> Coarse Pitch
• Knob B13 -> Reverse
• Knob B14 -> Amp Attack
• Knob B15 -> Amp Hold, Amp Decay
• Knob B16 -> Sample Start
• Knob B17 -> Mixer Pan
• Joystick X -> Aux 1 Send
• Joystick Y -> Aux 2 Send
• Pitch Bend Wheel -> Global Coarse Pitch
• Modulation Wheel -> Global Master Filter Tone
• Foot Switch -> All Play/Stop
- continues -
M-Audio Ozonic Template: Part Page 2
HARDWARE CONTROLLER:
M-AUDIO OZONIC
HARDWARE DATA FILE: HARDWARE PRESET:
Ozonic Chaos.ctl_rmx
Mixer levels, Solos, and Global parameters affect Parts 1-8. For all other parameters, the part you
control is determined by the host application track/MIDI channel
TEMPLATE OVERVIEW:
• Sliders C1-C8 -> Mixer Levels (Part 1-8)
• Slider C9 -> Master Level
• Buttons C32-C39 -> Solos (momentary)
• Button C40 -> Global Reverse (momentary)
• Button A27 -> Half Speed
• Button A28 -> All Stop
• Button A29 -> Global Chaos On/Off, Pattern Amt (momentary)
• Button A30 -> All Play
• Button A31 -> Double Speed
• Knob B10 -> Chaos On/Off
• Knob B11 -> Chaos Pattern Amount
• Knob B12 -> Chaos Repeat Amount
• Knob B13 -> Chaos Reverse Amount
• Knob B14 -> Chaos Pitch Amount
• Knob B15 -> Chaos Buzz Amount
• Knob B16 -> Chaos Buzz Time
• Knob B17 -> Chaos Buzz Speed
• Joystick X -> Aux 1 Send
• Joystick Y -> Aux 2 Send
• Pitch Bend Wheel -> Global Coarse Pitch
• Modulation Wheel -> Global Master Filter Tone
• Foot Switch -> All Play/Stop
- continues -
M-Audio Ozonic Template: Chaos Page 2