Professional Documents
Culture Documents
MECHANICAL UNIT
NUMERICAL CONTROL
Numerical Control µmEdge Navigator®
Motion technology High resolution microstepping
Interpolation Linear, circular and helical
(four axis version)
Interface Door controller SPP
Power consumption and supply 220 Vac - ± 500÷1200 Va
Size 0,003 mm (3µm)
Weight 220 Vac - ± 500 Va
MECHANICAL UNIT
NUMERICAL CONTROL
MECHANICAL UNIT
NUMERICAL CONTROL
MECHANICAL UNIT
NUMERICAL CONTROL
NUMERICAL CONTROL
Available in the Basic version, Advanced and Professional, Fenix 4.1 reflects the graphic
standards of Microsoft applications and is presented as a worksheet in which are integrated all
functions necessary both to the setting of the graphical composition and the definition of the
work to be performed, where the user is "driven" consistently from tooltips, contextual help
and General, and an updated manual that describe the various online options offered by the
various modules of the program.
The main modules of Fenix 4.1 are: CAD, nodes, Text Editor, 2D Sketch, CAM, matrix, Font Editor, AutoTraccia, stairs
MODELER: It is a tool that, starting from a 2D geometry or one of the primitives provided in the kit, through the import of bitmapp,
or drag and drop from CAD module and the subsequent overlap and combination of several elements, with a few intuitive
generates commands, artistic three-dimensional models based on profiles rise and Z coordinates set, on which you can also
"spread" pe of the texts.
Another interesting feature is the low-or high relief, that the development based on the gray levels in the image.
The 3D CAM interfaces directly with rows of typical probing in Reverse Engineering or three-dimensional CAD and has several
scaling functions and surface deformation as well as multiple machining strategies 3 and 4 interpolated axes or position. The paths
are generated on the basis of the geometry of the tools selected, which may be conical, cylindrical and rounded and the
perforations duplex can be inserted the "witnesses" (plugs) parameterizable.
Navigator is made by four modules, named Controls whose main functions are:
Control Test activates the manual movement of the axes and the spindle rotation and is used to check the proper functioning
of the system, set the source of the work, perform the preset automatic tool restore the XY positions prior to manual tool
changes, etc.
the Control Views displays the tool path and also its position relative to the working of the equipment, highlighted in the
default color in the CAM tool to be used and its Tower of membership in the warehouse manages the restart of the processing
to coordinate that it was interrupted, and so on.
Its intuitive user interface provides the information on the tool path currently loaded and the status
of the machine, the virtual remote control (same as the Ventures equipment supply), thus making it
possible to also change from PC technological parameters set, the display (5-axis for the model
Blackstone) of the workpiece with the relative size and the toolbar.
in addition to the normal functions of axis movement with manual control in real time using the
handwheel of any alarm signals and stop the ongoing process so as not to damage the workpiece,
the management of the preset tool for changing tire automatic recalculation of the tool path in the
event of a power failure etc.., one of the most exciting features is the Navigator DNC Production Lots
in that allows you to load and run various tool paths with different origins XYZ, setting also possible
repetitions and optimizations of automatic tool changes
Another useful option is the preliminary probing of the surface to be milled with relative and
temporary automatic generation of the tool path loaded, so that it will be carried out taking into
account any changes in Z.
The connection between the PC and the machine tools Venture servomotors (maximum three
controlled simultaneously) is through the USB port and you can make and program updates CNC
Pulse resident of that assistance telephone.