Professional Documents
Culture Documents
PR1H19L021D17
Code Introduction
TR H22 L0400
TR:Taper rod
TC 26 H22
Diameter: 26mm
TB 32 H22 S 7 C 52 1
Front flushing hole: 1= 1 flush hole
Gauge/Front button: 5 gauge/2 front
Button shape: C=Conical, S=Spherical
Taper angle: 7= 7°,11=11°
S=Short skirt, L=Long skirt
Fitting rods: H22=Hex22 taper drill rods
Diameter:32=32mm
TB=Taper button bits
TaperPR1H19L021D17
connection parameters
GSE 1
GSE 2
PR1H19L021D17
PR1H19L021D17
Taper cross bits 4°46' 6°7°11°12°
KF 76 R38
Code Introduction
Pilot bits
RB 89 B84 D06
Dome bits
DB 76 R32 B91 F3
Front flushing hole: F3= 3 flush hole
Gauge/Front button: 5 gauge/2 front
Thread: R32= R32 thread
Bit diameter: 76= 76mm
DB= Dome bits
Penetration rate
vs
Carbide/Bit life
Less buttons but bigger buttons: More buttons but smaller buttons:
It has relatively lower penetration It has higher penetration rate, but
rate, but the carbide is not easy to the carbide is easy to wear, so it has
wear, so it has longer life span. longer life span.
It is for soft, medium hard and low It is for very hard and high abrasive
abrasve rock formation. rock formation.
Flat front
For drilling in medium to hard and abrasive rock
Drop center
For drilling in mediume hard, maximum hole
deviation control.
Normal skirt:
For drilling in very hard and very abrasive rock
formation which is compact.
Retract skirt:
For drilling in loose, broken or fissured rock where
it is difficult to retract the drill string due to the hole
collapse.
Hemispherical buttons:
Unversal buttons for all rock formations, best suited
to hardest and very abrasive rock formations
Parabolic button:
Excellent penetration rate, but only suited to
medium hard and not so very abrasive rock
PR1H19L021D17
formations
Conical button:
For soft to medium rock hardness, more aggressive
with faster penetration rates.
Ballistic button:
Similar to Parabolic buttons, used for soft to
medium hard and not so abrasive rock formations,
excellent in penetration rate
PR1H19L021D17
Reaming tools
Coupling sleeve
Coupling sleeve
Thread Diameter Length
PR1H19L021D17Part Number Weight
A B mm inch mm inch Kg
R25 R32 45 13/4 170 657/64 CPR25R32L170D45 1.10
R28 R32 45 13/4 170 657/64 CPR28R32L170D45 0.96
R32 R38 55 25/32 180 71/8 CPR32R38L180D55 1.86
R32 T38 55 25/32 180 71/8 CPR32T38L180D55 2.10
R38 T38 55 25/32 190 733/64 CPR38T38L190D55 1.86
R25 35 119/50 150 59/10 CPR25L150D35 0.72
R28 40 129/50 155 61/10 CPR28L155D40 0.95
R32 45 13/4 170 657/64 CPR32L170D45 1.32
R38 55 25/32 170 657/64 CPR38L170D55 1.71
T38 55 25/32 190 733/64 CPT38L190D55 1.96
T45 63 215/32 210 817/64 CPT45L210D63 3.12
T45 66 219/32 210 817/64 CPT45L210D66 3.51
T51 72 27/8 235 91/4 CPT51L235D72 5.22
T51 76 3 235 91/4 CPT51L235D76 5.75
Code introduction
Extension rods
MF rods/Speed rods
Bench
Taper & production
button bits 12° rods
Atlas Copco
BBC43,44,45,100 10 R32 380 32 1.9 CopBBE43R3238032
Bolting
Tamrock Drifting
L400,L410,L500,L Bench 10 R32 380 32 2.0 TamL400R3238032
510,L550 drilling
Tamrock Drifting
HL500SUPER/560 Product - R38 500 45 5.3 TamHL500SPR3850045
SUPER/HL510S-45 drilling T38 500 45 5.3 TamHL500SPT3850045
Tamrock
HL650-45/700- Bench T38 600 45 7.0 TamHL650T3860045
45/700T-45/710- drilling - T45 600 45 7.5 TamHL650T4560045
45/800T-45
Tamrock
HL650-52/700- Bench T38 600 52 8.0 TamHL650T3860052
52/71052/HL710 drilling - T45 600 52 8.5 TamHL650T4560052
PE52/HL710SPE- T51 600 52 8.6 TamHL650T5160052
52/HL800T52/
HL800T-52
Tamrock
HL1000PE-65,
HL1010PE-65, Bench - T51 760 65 13.3 TamHL1000PET5176065
HL1060T/PE-65, drilling GT60 760 65 14.7 TamHL1000PEGT6076065
HL1500T/PE-65, ST58 760 65 13.4 TamHL1000PEST5876065
HL1560T/PE-65
Tamrock Bench
HL1500-52 drilling - T51 710 52 11.2 TamHL1500T5171052
HL1500T-52
Bench
Furukawa HD500 drilling 18 T45 710 51.8 9.6 FurHD500T4571052
Montabert
HC80R,HC105R,H Bench T38 670 45 7.3 MonHC80RT3867045
C107R,HC108R,H drilling - T45 670 45 7.9 MonHC80RT4567045
C109R
Montabert
HC120R,HC150 Bench T51 670 51 9.3 MonHC120RT5167051
R,HC155R,HC1 drilling -
58R
Ingersoll-Rand
YH65 Bench 19 T38 500 45 5.0 IRYH65T3850045
YH80 drilling T45 500 45 5.4 IRYH65T4550045
SOOSAN Bench -
ED100 drifting T45 640 56 8.3 SOOSANED100T4564056