Professional Documents
Culture Documents
www.wagnerdiesupply.com
ONTARIO, CA • TACOMA, WA • DALLAS, TX • ELMHURST, IL
A B O U T W A G N E R D I E S U P P LY A N D
OUR PHILOSOPHY
Since we opened our doors in 1947, Wagner has focused on providing customers with the best in
quality and service. That’s what our Valu-Edge philosophy is all about – we provide our customers
with more than just great supplies and equipment, we back up our products with the best in
service, technical support and training in the industry. After all, value is only maximized when
production is at it’s optimum, and that’s achieved when the correct products/tools are used for any
given operation. At Wagner, our technical staff won’t “sell you” on a particular product or
technique – we advise you, on the very best products and techniques for your specific application.
The results go hand in hand, more efficient production – optimizing yield – maximizing your profits.
It’s the Valu-Edge, and it’s only available from Wagner Die Supply - America’s leader in steel rule die
supplies for the diecutting industry. Get the Valu-Edge today!
CREDIT ACCOUNTS:
Terms: Net 30 days.
Minimum order: $50.00
Returned checks will be charged $30.00
To establish a credit account with Wagner Die
Supply, download a credit application from our
website at:
http://www.wagnerdiesupply.com/creditapp.html
Or call us at (800) 423-4478 and request that one
be sent to you by fax or mail.
OVERAGE POLICY:
On custom-made products Wagner Die Supply
reserves the right to ship up to a 10% overage.
Your Wagner Die Supply customer service
representative can answer any questions you
might have regarding our overage policy.
WAGNER PUNCHES
1-2
STEEL RUL E
3-4
DIEROOM SUPPLIES
5-8
EJECTION MATERIAL S
9
CREASING MATRIX
10
DIECUTTING & MA KEREA DY
11-12
13-14 DIEROOM EQU IPMENT
www.wagnerdiesupply.com
WAGNER PUNCHES
Standard Tube with Standard Tube with 007 Straight Cut - Special Base
Ejectors Spring featuring minimum
support bevel
www.wagnerdiesupply.com
WAGNER PUNCHES
Seamless Hangers Feed Thru Feed Thru Ovals Serrated Feed Thru
Custom-milled Punches
Rolodex® Punches
from Steel Rule
Micrometer Adapter -
for measuring rule and
punch heights up to 1”.
Thickness: 1 PT 1-1/2 PT 2 PT 3 PT 4 PT 6 PT 8 PT
.014” (0.36 mm) .021” (0.53 mm) .028” (0.71 mm) .042” (1.07 mm) .056” (1.42 mm) .084” (2.13 mm) .112” (2.84 mm)
Cutting Rule Profiles available in ground or shaved edge in several bevel angles.
Known as: Typical uses:
Center Bevel Center Bevel, Standard Bevel, Double This is by far the most popular bevel for
Bevel, Center Face or A Bevel. conventional paperboard cutting.
Approximately 85% of all paperboard cut-
ting is done with a Center Bevel rule.
Single Bevel Side Bevel, Single Bevel, Side Face, Single Bevel rule produces a square
B Bevel or Flush Bevel finish. It’s also used to produce tighter bends,
compared to Center Bevel rule.
Long Center Bevel Long Center Bevel, Double Double Bevel, This rule is especially effective when
Center Face Double Bevel,Facet Bevel or cutting hard and/or thick materials.
AA Bevel It helps reduce cutting pressure by deflecting
Standard length of Bevel: 2 pt. - 1/8” long pressure with the first bevel supported by the
3 pt. - 3/16” long, 4 pt. - 1/8” or 3/16” long second bevel.
Creasing Rule Profiles designed to make an impression in the die cut product for folding.
2 PT body with a
3 or 4 PT top
3 PT body with a
4 , 6 or 8 PT top
2 PT and 3 PT
Standard Double 4, 6 and 8 PT 4 PT body with a 2 PT body with a
Round Single Round 6 or 8 PT top 1 or 1.5 PT top
Other creasing rule profiles are available, like Tru-Fold, Positive Score and MicroTrak.
Perforating Rule available from 2 teeth per inch to 100 teeth per inch (TPI).
2 teeth per inch 3/32” tooth x 1/32” space
Wave Rule available in edge wave or full body wave, depending on wave required.
Corrugated edge wave Medium fine edge wave Medium angle full body wave
Patterns are not actual size, contact Wagner Die Supply for a full listing of exact sizes and styles.
Rotary & Serrated Rule used in cylinder and flat bed cutting.
Rotary rule available in 8, 10, 12 and 13 serrated teeth per inch in curved and straight styles.
Serrated rule is designed for cutting foams, films and other materials that are difficult to cut.
Available in a wide variety of teeth per inch configurations.
Contact Wagner Die Supply for a complete listing of National Steel Rule products.
www.wagnerdiesupply.com
STEEL RULE
Cutting Rule - C
A listing of manufacturers and their
A B
products with specifications and ap-
plications.
Through Hardened Edge Hardened, Softer Body
Viking Flex HP34 Plasma beam hardened Recycled and virgin paperboard
B = 34 HRC, C = 61 HRC
Viking Flex HP40 Plasma beam hardened Recycled and virgin paperboard
B = 40 HRC, C = 61 HRC
Viking Flex G-44 HP Plasma beam hardened Gaskets, hard to cut materials
B = 44 HRC, C = 61 HRC
Viking HF 40 - Paperboard
B = 40 HRC, C = 51 HRC
Viking MM-40 - Paperboard, corrugated
A = 40 HRC
Viking MM-44 - Paperboard, corrugated
A = 44 HRC
Viking MM-47 - Paperboard, corrugated
A = 47 HRC
Most cutting rules are available in either ground or shaved edge, and several bevel angles.
Quicknick Grinders - Dumore Grinder - Handee Air Grinder - Dremel Moto Tool ® -
In 110V, 220V or pneu- Model #10-351 22,000 RPM 17,500 RPM max @ 90 PSI 28,000 RPM uses #409 and
matic versions. max, uses #39 mandrel #420 grinding discs only
www.wagnerdiesupply.com
DIE ROOM SUPPLIES
Extractor 2000 - Bar-Plate Rule Puller - Helmold Rule Puller - Channellock Pullers -
The safe way to pull rule, Lifts rule as close as 1/4” 8-1/4” long, 1” wide jaw 7”, 8”, 10” & 14” sizes
designed and manufactured apart with 5/8” deep throat
by Wagner Die Supply
www.wagnerdiesupply.com
DIE ROOM SUPPLIES
threaded T-Nuts.
Wagner Die Supply offers a complete line of Di-Point E-Z Set by Monroe
open and closed cell ejection materials.
Dura Strip & Vulcan Kushion Crease - Die Prene 80 C-Profile Rubber -
Sheets - For rotary dies, reduces Economical slot rubber 60 Durometer material,
Premium slot rubber fractured scores White non-marking
compound
www.wagnerdiesupply.com
C R E A S I N G M AT R I X
Tapered edges for smooth feed. Eliminates jamming, and ensures a uniform and well-defined crease throughout your run.
Bobst Metrix - Metal Base Bobst Syntrix - All Plastic Bobst Fibrix - Pressboard
Matrix Matrix Matrix
Score Cutting and Double Face Tape - Sample Maker’s Corrugated Box
Skiveready Knives 1”, 2”, 6” and 12” Wide Creasing Rule Holder Score Cutting Knife
Rolls
and Scoring Tool
www.wagnerdiesupply.com
DIECUTTING & MAKEREADY
Steel Stop Pins - G&R Stop Guides - Adjusto Guides - Wood Furniture -
Precision ground to help For use on clam shell type Available in 2” x 2” or Available in 36” lengths,
protect steel rule dies from presses when cutting 2” x 1” versions from 5/8” tall in a variety of
damage corrugated material Bar-plate. picas.
Quoins & Keys - Torque Key - Econo Quion & Key - MA Series III Cutting
Quoins are available in Prevents damage to quoins 3” long, features a wedge Press -
3”, 6”, 9” and 12” lengths from over-tightening locking system. adjustable to rule heights
of .75 to 1.5, 4-5 tons of
cutting pressure
Wagner Grabber - Air Stripping Hammer Air Tool Balancer - Stripping Hammer -
The safe way to remove Quickly strips and separates Supports tools weighing For stripping waste and
scrap and debris from the waste from diecut parts, ac- 5 to 20 lbs. trim by hand
stripping end of the press! cessories also available
Wagner Die Supply - is an Author- Wagner is a designated stocking station Bar-Plate Stripmates -
ized Distributor of Bobst parts and sup- (Elmhurst, IL and Ontario, CA) for DICAR BP 1 and 2 are hand-powered, BP 3 is
plies for autoplatens including anvil covers. air-powered. Off-press internal strip-
stripping and blanking components. ping units.
cut-down standard
Extractor Jaws -
Replacement Jaws for 2000 and 3000 models, available in
Wagner Bender Die Sets standard or “cut-down” version for tight rule layouts.
www.wagnerdiesupply.com
DIEROOM EQUIPMENT
4-hole version
Helmold Heavy Duty - Helmold Miter - Helmold Power -As- Helmold Cutawl Saw -
2 & 4-hole Notchers, also Single and Right and Left sist Bender & for Flat and Rotary dieboards
available in E-Z model hand models Notcher
Storage Systems -
For 5/8” and 3/4” dieboards, stripping
and blanking tooling
Rotary Die Storage System and Rotary Transfer Cart Flat Die Transfer Cart
Flat Die Storage Pins - Litho Plate Storage - Easi-Hanger Blanking System
1/8” pin for 5/8” wood, 3/16” pin for Hooks are also available separately Hanger Brackets
3/4” wood
Mounted and Unmounted Printing Plate Transfer Cart Ink Storage Units
Printing Plate Storage -
Hooks are also available separately
Custom Storage Systems can also be designed and manufactured upon request.
www.wagnerdiesupply.com
America’s Die Supply leader.
Celebrating over six decades of service.
WEST COAST
2041 Elm Court, Ontario, CA 91761
Toll-Free (800) 423-4478
(909) 947-3044 • Fax: (909) 923-7809
Toll-Free Fax Ordering: (866) 786-2437
P-U-N-C-H-E-S
E-mail orders: sales@wagnerdiesupply.com
Northwest Shipping Point - Tacoma, WA
SOUTHWEST
2532 Converse Street, Dallas, TX 75207
Toll-Free (800) 262-4695
(214) 630-4695 • Fax: (214) 630-5425
Toll-Free Fax Ordering: (800) 446-6651
E-mail orders: sales@wagnerdiesupply.com
MIDWEST
960 Industrial Drive, Unit 8, Elmhurst, IL 60126
Toll-Free (800) 334-7914
(630) 782-6230 • Fax: (630) 782-6220
Toll-Free Fax Ordering: (800) 554-9124
E-mail orders: sales@wagnerdiesupply.com
For the latest information and updates, visit our website at:
www.wagnerdiesupply.com MEMBER