Professional Documents
Culture Documents
1
Horizontal Pumps
SEVERE DUTY RUBBER LINED, METAL LINED, and METAL HORIZONTAL PUMPS
ASH Pump Series MCH/MCC/MMC and Warman AH .................................................................................................... 4
HEAVY DUTY RUBBER LINED and METAL LINED HORIZONTAL FROTH PUMPS
Warman AHF/LF/MF ........................................................................................................................................................... 8
Vertical Pumps
Galigher Series 5000 Pumps ............................................................................................................................................. 10
Submersible Pumps
MOLDED ELASTOMER, ALLOY METAL, OR HIGH CHROME SUBMERSIBLE SLURRY PUMPS
Hazleton Model SHW ........................................................................................................................................................ 12
THE “UNIQUE” CAVEX INLET HEAD DESIGN ALLOWS THE HIGHEST EFFICIENCY
Hydrocyclone with amazing results ................................................................................................................................ 14
And More!
OTHER UNIQUE PUMP PRODUCTS, and OTHER WEIR MINERALS GROUP PRODUCTS and SERVICES ............................. 16
2
™
Pto. Ordaz
Bogotá Venezuela
Perú
Lima
Paraopebas
Belem
Arequipa
Brasil
Iquique Belo Horizonte Vitoria
Antofagasta
Copiapó Sao Paulo
Chile
Santiago
Concepción
Punta Arenas
Venezuela
UD 304 manzana 27,
parcela 14, calle 6,
Zona Industrial Los
Pinos, Puerto Ordaz-
Estado Bolivar,
Venezuela
Chile - Antofagasta (58-286) 994 5142
Radomiro Tomic 7585 (58-286) 994 4737
(56-55) 231024 Fax (58-286) 994 3886
(56-55) 231056
Brasil
Av. João Ventura,
Batista, 622,
Villa Guilherme,
Chile - Copiapó 02054-100
Chañarcillo 460 São Paulo, Brasil
(56-52) 214943 (55-11) 6905 1860
Fax (56-52) 214944 (55-11) 6905 1741
3
ASH Pump Series MCH/MCC/MMC and Warman AH
SEVERE DUTY RUBBER LINED, METAL LINED, AND METAL CASED HORIZONTAL PUMPS
Unique, easily centered stuffing box (MCH, MMC) – reduced gland seal typically found in hard
Warman AH Pump
maintenance and extended packing life rock mining such as cop-
Adjustable sideliners (MCH, MMC) – maximum possible operating per, gold, silver, as well
efficiency and promote longer wear life as oil sands.
Warman AH Pump
Cubic meters per hour (m3/hr)
10 20 50 100 200 300 500 700 1000 1500 2000 3000 5000
260
3/2 6/1 10/8 14/12 20/18 75
ASH Pump Series MCH/MCC/MMC 240
70
Cubic meters per hour (m3/hr) 220
65
100 200 300 500 700 100 1500 2000 3000 5000 10000 20000 1.5/1
200 60
200 60
150 250 350 450 650
55 180 55
180
50
Total dynamic head (meters)
50 160
Total dynamic head (feet)
160
45 45
140
Total dynamic head (meters)
140
40 40
Total dynamic head (feet)
120
120 35
35
100 100 30
30
25 80 25
80
20 20
60 60
15 15
40 40
10 10
20 20
5 5
125 200 300 400 550 750 2/1.5 4/3 8/6 12/10 16/14
0
456 8 15 20 25 30 35 40 50 60 70 80 90 15 20 30 40 50 60 70 80 50 2 3 4 56 8 15 20 25 30 35 40 50 60 70 80 90 15 20 30
1000 10.000 100 1000 10.000
4 U.S. gallons per minute (g.p.m.) U.S. gallons per minute (g.p.m.)
ASH Pump Series SRC/SRH and Warman L
VERSATILE DESIGNED HORIZONTAL SLURRY PUMPS
Large, open internal passages - longer wear life and lower ASH Pump Series SRCISRH able with interchangeable
operating costs metal or bolt-in elastomer
Thick elastomer and metal liners - corrosion resistance and liners. The combination of
maximum wear life rugged design, advance
Full flush gland, low flow, dry running centrifugal seals - hydraulics, and depend-
reduce flush water usage minimizing pump operating costs
ability that comes from
Cartridge-style bearing assembly - allows for assembly repair building pumps since the
in a clean environment resulting in reliable operation and
early 1930s, translates
prolonged bearing life
into performance unpar-
Multi-stage high pressure operation to 600 psi (optional ASH
Pump) alleled by any other slurry
pump manufacturer.
Warman L Pump
Warman L also features:
Warman L Pump
ASH Pump Series SRC/SRH
Cubic meters per hour (m3/hr)
Cubic meters per hour (m3/hr)
10 20 50 100 200 300 500 700 1.000 1.500 2.000 3.000 5.000 10.000
10 20 50 100 200 300 500 700 1.000 1.500 2.000 3.000 5.000 10.000 20 60
180 55 200L 300L 400L 500L 650L
0 55
50 50L 100L
160 2.5 x 2 5 x 4 8x8 14x14 18 x 16 26x24
50
45 18
140 45
Total dynamic head (meters)
40 0
Total dynamic head (meters)
120 40
2 x 1.5
35 16
35
100 30
0 30
80 25
14 25
20
60 20
0
15
40 15
10 12
10
20
5 0
4x3 6x6 10x10 16x14 22 x 20 30 x 28 5
20L 75L 150L 250L 350L 450L 550L
0
50 2 3 4 56 8 15 20 25 30 35 40 50 60 70 80 90 15 20 30 40 50 60 50 2 3 4 56 8 15 20 25 3035 40 50 60 70 8090 15 20 30 40 50 60
100 1000 10000 100 1.000 10.000
U.S. gallons per minute (g.p.m.) U.S. gallons per minute (g.p.m.) 5
ASH Pump Series ME/MG and Warman AHU
ALL METAL UNLINED HORIZONTAL PUMPS
160 50 50
Total dynamic head (feet)
160 4/3
45 45
140
140
40 40
120 6/4
35 120
35
100 30 100 30
8/6
80 25
80 25
20
60 200M 20
60
15
40 15
10 40 250L
10
20 5
5 10 20 35 20 5
0
50 2 3 456 8 15 20 25 30 35 40 50 60 70 80 90 0
100 1.000 10.000 50 2 3 456 8 15 20 25 30 35 40 50 60 70 80 90
100 1.000 10.000
6 U.S. gallons per minute (g.p.m.) U.S. gallons per minute (g.p.m.)
Warman GSL and L
LINED FGD HORIZONTAL SLURRY PUMP
L Pump
Warman L also features:
Interchangeable elastomer and metal bolt-in liner materials – ease of liner change-out and reduced maintenance costs
Full flush, low flow, dry running centrifugal, or mechanical seals – reduce flush water usage minimizing pump operating costs
Warman L Pump
Warman GSL Pump Cubic meters per hour (m3/hr)
Cubic meters per hour (m3/hr) 10 20 50 100 200 300 500 700 1.000 1.500 2.000 3.000 5.000 10.000
200 60
2000 3200 5000 10000 20000 200L 300L 400L 500L 650L
120 180 55
35 50L 100L
50
160
100 30 45
Total dynamic head (feet) (feet)
140
Total dynamic head (meters) (meters)
40
80 25 120
35
20 100 30
60
80 25
15
40 60 20
10 15
40
20 10
5 20
600 700 800 1000 20L 75L 150L 250L 350L 450L 550L 5
0 0
90 15 20 30 40 50 60 70 80 50 2 3 4 56 8 15 20 25 30 35 40 50 60 70 80 90 15 20 30 40 50 60
100 1000 10.000
10000
U.S. gallons per minute (g.p.m.)
U.S. gallons per minute (g.p.m.)
7
Warman AHF/LF/MF
HEAVY DUTY RUBBER LINED AND METAL LINED HORIZONTAL FROTH PUMPS
Heavy-duty construction with through-bolt casing design – the Warman Froth Pump
ease of maintenance and less down time economically handles high
Ductile iron fully lined casing – durability, strength and air-laden slurry mixtures.
long service life
This unique froth pump
Through-bolt construction – reduced maintenance cost design includes an
Large, open internal passages – longer wear life and lower Warman AHF/LF/MF Pump enlarged suction diameter
operating costs
and a unique semi-open
Thick elastomer and metal liners – maximum wear life impeller to assist the flow
Interchangeable elastomer and metal bolt-in liner of froth into the pump.
materials – reduced maintenance costs
Liner desing – reduced operating costs by allowing
replacement of individual components
Cartridge-style bearing assembly – allows for assembly
repair in a clean environment resulting in reliable
operation and prolonged bearing life
Standard AH can be converted by replacing cover plate,
throatbush and impeller
100
30
Total dynamic head (meters)
80 25
Total dynamic head (feet)
60 20
15
40
10
20
5
3AHF 6AHF 250MF 350MF
0
50 2 3 4 56 8 15 20 25 30 35 40 50 60 70 80 90
100 1000 10.000 15.000
180 55
14/12G 28/24G
Total dynamic head (meters)
160 50
Total dynamic head (feet)
12/10G 24/20G 45
140
40
120 10/8G 20/18G
35
100 30
8/6G 18/16G
80 25
6/4G 20
60
15
40
10
20
5
14/14D 20/20D 30/26D 36/36D
0
2 3 4 56 8 15 20 25 30 35 40 50 60 70 80 90 15 20 30 40 50 60 70 80
100 1000 10.000 100.000
VERTICAL
PUMPS
Galigher Series 5000 pumps
are accepted around the
world for their dependability
and initial cost and service
economy. They feature heavy-
duty construction, long
service life, and easy
maintenance, and are
available with a wide range
of shaft sizes, lengths, and
materials to match your
pumping needs.
Auger
120
35
80 25
20
60
15
40
10
0
50 2 3 4 56 8 15 20 25 30 35 40 50 60 70 80 90
100 1000
Both models available in standard lengths of 4, 5, and 6 its inlet, such as large, stringy, or
foot setting depths with 27% chrome iron wet ends degradable solids. Particle degrada-
tion is minimal since pumped solids
do not pass throuhg the impeller.
Hazleton VNCB2
250
150
Total dynamic head (meters)
Total dynamic head (feet)
3 70
3-14
40
Total dynamic head (feet)
125 200 60
2
100 30 10 50
150
2-9
40
75
20
100 30
50 90
80
70 20
6-12 10 60
25 50
40
30 12 10
20
0 0 0 0
20 30 40 60 80 200 300400 600 800 2000 10 20 30 40 50 60 70 80 90100 200 300 400 500 600 700 1000 2000 3000 40005000 8000
0 100 1000
U.S. gallons per minute (g.p.m.) U.S. gallons per minute (g.p.m.) 11
Hazleton Model SHW
MODEL ELASTOMER, ALLOY METAL, OR HIGH CHROME SUBMERSIBLE SLURRY PUMPS
Moisture detection and thermal protection – provide early warning value when a dependable,
to avoid serious damage to the motor long-lasting submersible
Dual volute casing – higher discharge heads pump is needed.
Balanced back to back seal arrangement – isolate the seals from
slurry, improves reliability
Agitator option available – clear solids from sumps
100
4 6
300
90
80
250
70
3
Total dynamic head (meters)
Total dynamic head (feet)
200 60
2
50
10
150
40
100 30
90
80
70 20
60
50
40 10
30 12
20
0 0
10 20 30 40 50 60 70 80 90100 200 300 400 500 600 700 1000 2000 3000 40005000 8000
• crankshaft driven piston and piston diaphragm pumps for transporting ores,
minerals and tailings.
• hydraulically driven piston pumps for paste and sludge pumping with and
extremely high viscosity and large solids particles.
• customer design support ranging from basic system up to turn-key projects
Construction industry
13
Hydrocyclone with amazing results
The CAVEX shape replace the vertical cliff with a side slope. Now CAVEX implies a reduce in the operation expenses,
the feed stream follows a natural path and blending it smoothly beside excellent result in several trials in plants.
with the rotating slurry inside the feed chamber. This unique Obtaining of the same milling with more tonnage.
shape reduces turbulence throughout the whole cyclone. increased recovery of metal
CAVEX cyclones wear evenly and separate the slurry efficiently. increased recovery of the useful life
90º
Level of
wear
45º 135º
HIGH
100
0º
75
CAVEX®
Feed to UF
LOW
Plan view Conventional Plan view CAVEX
® 50
Maximum Capacity Conventional
25
To increase the flow means that you can make more with less
energy consumption and less cyclones.
0
CAVEX minimizes the resistance to the flow in the feeding 0.0 50.0 100.0 150.0 200.0 250.0 300.0 350.0 400.0 450.0 500.0 550.0 600.0 650.0 700.0
Nominal Size (um)
chamber, CAVEX Cyclones processes a bigger throughput in
comparison with a conventional Cyclone with the equivalent
inlet area and diameter. Different models for a wide
range of applications
Hydrocyclone Capacity (l/s)
400 58.0
300 43.5
Pressure drop (kPa)
250 36.3
Conventional 200 29.0
Pressure (PSI)
150 21.8
100 14.5
90 13.0
80 11.6
70 10.2
60 8.7
50 7.3
CAVEX®
40 5.8
30 4.4
3.6 7.2 10.8 14.4 18.0 25.2 36.0 72.0 108.0 144.0 252.0 360.0 720.0 1,800.0
21.6 32.4 216.0 324.0 1,440.0
28.8 180.0 288.0 1,080.0
Flow (gpm)
Hydrocyclone Flowrate m3 /hr
This characteristic allows to use, less cyclones to process the
14 same pulp flowrate.
Heavy Duty Slurry Valves
More than 30 years manufacturing valves for abrasive and corrosive slurry applications.
WEIR VULCO offers a wide variety of valves designed for abrasive / corrosive fluids
handling. Its easy operation and low cost of maintenance satisfy widely the
requirements of mining and industry.
Valves are supplied with rubber lining or interchangeable rubber sleeves according to
fluid characteristics, lets you an easy field replacement.
General Characteristics
• Rubber lining or interchangeable rubber sleeves designed for operate with abrasive / corrosive fluids.
• Robust and heavy duty design for heavy abrasive and corrosive process slurries.
• Possibility of manual, pneumatic, hydraulic or electrical actuator.
• ANSI class 150# flanges as standard, other flanges under request. Isogate WS
• All exposed metal parts are epoxy painted as standard. Other special surface treatments under request.
• Low cost of maintenance.
• Easy operation.
Available Models
ISOGATE WS Series, wafer and lug type knife gate valves. Sizes from 3” to 24”.
OMEGA Series, open body pinch valves. Sizes from 1” to 32”. Two versions : Heavy duty
robust split design and light duty design up to 12”.
Omega