Professional Documents
Culture Documents
1. ___ The Block command allows you to combine several objects into one object (a
named Block).
2. ___ The Block command is used to create the geometry that is to be included in the
Block.
3. ___ The Insert command inserts a Block or another drawing (.DWG file) into the
current drawing.
4. ___ When a Block is Inserted, it always assumes the Color and Linetype properties of
the current layer.
5. ___ To break a Block back into its original set of objects, use Explode.
6. ___ Wblock (write block) writes an existing Block out to a .DWG file or you can select
Objects if you want to transform a set of objects to disk as a .DWG file.
7. ___ Autodesk Seek is a website that allows you to purchase and download drawings
used in a variety of industries.
8. ___ You can use tool palettes to insert blocks as well as hatch patterns.
9. ___ The DesignCenter window allows you to navigate, find, and preview a variety of
content, including Blocks, only if the content is located in the current directory.
10. ___ You cannot add Blocks to a drawing with DesignCenter while another command
is active.
Multiple Choice (circle the correct letter)
1. If the original objects used for the Block are created on Layer 0, ____ when it is Inserted.
a. the Block assumes a color of White, linetype of Continuous, and lineweight of
Default
b. the Block can be assigned a color, linetype, and lineweight
c. the Block keeps the color, linetype, and lineweight of the original objects
d. the Block assumes the color, linetype, and lineweight of the current layer
3. Using drag and drop, tool palettes allow you to ____ into the current drawing.
a. insert only Blocks
b. drag and drop hatch patterns and Blocks
c. search for and insert any drawing
d. insert Blocks, Dimstyles, Layers, Layouts, Linetypes, Textstyles and Xrefs
5. If you want to convert Blocks inserted with Byblock property settings (color, lineweight,
linetype, etc.) to assume the properties of the layers where the Blocks reside in the new
drawing, use the ____ command.
a. Bylayer
b. Setbylayer
c. Chprop
d. Rename
7. Content that can be viewed and managed using DesignCenter includes ____.
a. only Blocks and Dimstyles
b. only Blocks, Dimstyles, Layouts, and Xrefs
c. Blocks, Dimstyles, Layers, Layouts, Linetypes, Table Styles, Textstyles and Xrefs
d. only Blocks and Xrefs
8. If you wanted to drag and drop hatch patterns into your drawing, you could use ____.
a. DesignCenter
b. Autodesk Seek
c. Tool Palettes
d. all of the above
10. When you drag and drop a Block into the current drawing using any method, the Block is
scaled ____.
a. based on the specified units of the Block definition when the Block was created
b. based on the specified Drawing Units for Block Inserts set in the current drawing
c. based on both a. and b.
d. based on the values you key in when prompted for the X and Y scale factors when
the Block is inserted