Professional Documents
Culture Documents
Centaur 50: Gas Turbine Generator Set
Centaur 50: Gas Turbine Generator Set
General Specifications
Centaur ® 50 Gas Turbine Generator
• Industrial, Single Shaft • Type: Salient Pole, 3 Phase, 6 Wire, – Remote Control and Display
• Axial Compressor Wye Connected, Synchronous, with – 120-VDC Control Battery/Charger
– 11 Stage Brushless Exciter – Supervisory Communications
– Variable Inlet Guide Vanes • Construction Options Interface
– Pressure Ratio: 10:6:1 – Open Drip Proof – Turbine Performance Map
– Inlet Airflow: 18.8 kg/sec – Weather Protected II (WPII) – Printer/Logger
(41.4 lb/sec) – Totally Enclosed Water/Air Cooled – Field Programming
– Axially Split Case • Sleeve Bearings – Predictive Emissions Monitoring
• Combustion Chamber • Voltage Regulation • Start System: Direct Drive AC
– Annular Type – Solid-State Regulation with • Fuel Systems
– Conventional or Lean-Premixed, Permanent Magnet Generator – Natural Gas
Dry, Low Emission (SoLoNOx™) • NEMA Class F Insulation with B – Dual (Gas/Liquid)
– 12 Fuel Injectors Temperature Rise – Alternate Fuels
– Torch Ignitor System • Integrated Lube Oil System
• Voltages: 3300 to 13,800 Volts
• Turbine – Turbine-Driven Accessories
– 3 Stage, Reaction • Frequency: 50 or 60 Hz – Oil Tank Vent Separator
– Max. Speed: 14,950 rpm Key Package Features – Oil Tank Vent Flame Trap
• Bearings • Lube Oil System Options
• Base Frame with Drip Pans
– Journal: Tilting Pad – Oil Cooler
– Thrust: Tilting Pad (Active) and • 316L Stainless Steel Piping ≤4” dia – Oil Heater
Fixed Tapered Land (Inactive) • Compression-Type Tube Fittings • Axial Compressor Cleaning
• Coatings • Digital Display Panel Systems
– Compressor Stators and Drums: • Electrical System Options – On-Crank
Inorganic Aluminum – NEC Class I, Group D, Div. 2 – On-Crank/On-Line
– Turbine Nozzles and Blades: – CENELEC Zone 2 – Certified Cleaning Tank
Precious Metal Diffusion Aluminide • Turbotronic™ Microprocessor • Air Inlet and Exhaust System Options
• Axial Position Probe, Proximity Control System • Enclosure and Associated Options
Probes, Keyphasor and RTDs – Freestanding Control Console • Factory Testing of Turbine and
Main Reduction Drive (with offskid controls) Package
– Video Display Unit • Documentation
• Epicyclic Type – Temperature and Vibration – Drawings
• 1500 rpm (50 Hz) or Monitoring – Quality Control Data Book
1800 rpm (60 Hz) – Historical Displays – Inspection and Test Plan
• Accelerometer • Control Systems Options – Test Reports
– Auxiliary Control Interface or – Operation and Maintenance
Auxiliary Control Console (with Instruction Manual
onskid controls)
CENTAUR 50
Gas Turbine Generator Set
Oil & Gas Applications
DS50GS-003M