Professional Documents
Culture Documents
Caterpillar Performance Handbook 49 62020 Partie74
Caterpillar Performance Handbook 49 62020 Partie74
Tractor
5-122
Scale 1:20 mm/inch 30.5 Tire Scale 1:20 mm/inch 30.5 Tire
Dimensions shown represent machine with 30.5L-32 Tires and Quick Coupler
MODEL 586C HRC 586C LRC
Lift Arm Lowered Position — Hinge Pin Location:
A Hinge Pin Height* 591 mm 23.3" 591 mm 23.3"
B Hinge Pin Reach 997 mm 39.3" 997 mm 39.3"
Lift Arm Lowered Position — Quick Coupler Pin Locations:
C Retracted Upper Pin Height* 1250 mm 49.2" 1250 mm 49.2"
D Retracted Lower Pin Height* 591 mm 23.3" 591 mm 23.3"
E Extended Upper Pin Height* 338 mm 13.3" 338 mm 13.3"
F Extended Lower Pin Height* 452 mm 17.8" 452 mm 17.8"
G Retracted Upper Pin Reach 1141 mm 44.9" 1141 mm 44.9"
H Retracted Lower Pin Reach 1121 mm 44.1" 1121 mm 44.1"
J Extended Upper Pin Reach 1624 mm 63.9" 1624 mm 63.9"
K Extended Lower Pin Reach 913 mm 35.9" 913 mm 35.9"
L Quick Coupler Range of Motion 99.6° 99.6°
Lift Arm Raised Position — Hinge Pin Location:
M Hinge Pin Height* 3217 mm 126.7" 3217 mm 126.7"
N Hinge Pin Reach 1001 mm 39.4" 1001 mm 39.4"
Lift Arm Raised Position — Quick Coupler Pin Locations:
O Retracted Upper Pin Height* 3005 mm 118.3" 3005 mm 118.3"
P Retracted Lower Pin Height* 2435 mm 95.9" 2435 mm 95.9"
Q Extended Upper Pin Height* 2975 mm 117.1" 2975 mm 117.1"
R Extended Lower Pin Height* 2332 mm 91.8" 2332 mm 91.8"
S Retracted Upper Pin Reach 789 mm 31.0" 789 mm 31.0"
T Retracted Lower Pin Reach 1122 mm 44.2" 1122 mm 44.2"
U Extended Upper Pin Reach 1290 mm 50.7" 1290 mm 50.7"
V Extended Lower Pin Reach 1137 mm 44.8" 1137 mm 44.8"
W Quick Coupler Range of Motion 43.6° 43.6°
*Subtract 101 mm (4.0") for 28L-26 Tires and 73 mm (2.9") for 67-34 Tires.
5-123
MODEL BR624
A Overall Width 2474 mm 97.4"
B Working Width 2193 mm 86.3"
C Length 2618 mm 103.1"
D Height 873 mm 44.4"
Weight 2631 kg 5800 lb
Drive Method Direct Mount Rotor Bar
Hydraulic Motor Type Single Speed Axial Piston
Optimum Hydraulic Flow Range 246 L/min 65 gpm
Optimum Hydraulic Pressure Range 37 921 kPa 5500 psi
Optimum Speed 950 RPM
Number of Blades 2
Maximum Diameter of Material to be Cut 203 mm 8"
5-124
MODEL HM825
A Overall Width 2900 mm 114.2"
B Working Width 2540 mm 100.0"
C Length 1677 mm 66.0"
D Height 1859 mm 73.2"
Weight 3697 kg 8150 lb
Drive Method Polychain Belt
Hydraulic Motor Type Dual Speed Axial Piston
Optimum Hydraulic Flow Range 378 L/min 100 gpm
Optimum Hydraulic Pressure Range 37 921 kPa 5500 psi
Optimum Drum Speed 1200-1800 RPM
Number of Teeth 58
Maximum Diameter of Material to be Cut 406 mm 16"
5-125