Professional Documents
Culture Documents
PBNM000-00014-style11
Knitting Pattern V.1
Copyright © MEZ Crafts UK Ltd., 2017.
Ladies Cable Sweater Craft
PBNM000-00014-style11
v.1
SIZES FRONT
Using 5mm (US 8) needles cast on 78 [86: 94] sts.
S M L Work in rib as given for back until front meas 10 cm, ending with
To fit bust RS facing for next row.
81-86 91-97 102-107 cm Work in rev st st and cable patt following the chart as folls:
32-34 36 39 in Next row: Work 6 [10: 14] sts in rev st st, 66 sts in Cable Pattern,
Actual bust measurement of garment cm 6 [10: 14] sts in rev st st.
91 100 110 cm Cont in patt as established until front meas 36 [35: 34] cm from
36 39 43 in beg, ending with RS facing for next row.
Shape armholes
YARN Cast off 2 sts at beg of next 2 rows.
Patons Dream Light Dec 1 st at each end of next and foll 2 alt rows. 68 [76: 84] sts.
6 7 9 x 50g Cont straight until armhole meas 14cm, ending with RS facing
(photographed in Fog Heather 00002) for next row.
Shape front neck
NEEDLES Next row (RS): K28 [30: 32], and turn, leaving rem sts on a
1 pair 5mm (no 6) (US 8) needles holder.
5mm (no 6) (US 8) circular needle, no more than 40 cm long Work each side of neck separately.
Cable needle (cn) Cast off 3 sts at beg of next row and 2 sts at beg of next alt row.
23 [25: 27] sts.
TENSION Dec 1 st at neck edge on foll 2 alt rows, then on 2 foll 4th rows.
17 sts and 27 rows to 10 cm measured over rev st st using 5mm 19 [21: 23] sts.
(US 8) needles. Cont straight until armhole meas same as back armhole to
Take time to check tension, changing needle size if necessary. shoulder, ending with RS facing for next row. Cast off rem sts.
With RS facing, rejoin yarn to rem sts and cast off centre 12 [16: 20]
BACK and patt to end. Complete to match first side, reversing shapings.
Using 5mm (US 8) needles cast on 78 [86: 94] sts.
Row 1 (RS): K2, *P2, K2, rep from * to end. SLEEVES
Row 2: P2, *K2, P2, rep from * to end. Using 5mm (US 8) needles cast on 38 [42: 42] sts.
These 2 rows form rib. Work in rib as given for back until sleeve meas 5 cm, dec 2 sts
Cont in rib until back meas 10 cm, ending with RS facing for next evenly across last row and ending with RS facing for next row. 36
row. [40: 40] sts.
Cont in st st until back meas 46 [45: 44] cm from beg, ending with Work in rev st st shaping sides by inc 1 st at each end of 15th [9th:
a RS facing for next row. 5th] and 5 [5: 7] foll 16th [10th: 6th] rows , then on – [3: 6] foll –
Shape armholes [12th: 8th] rows. 48 [58: 68] sts.
Cast off 2 sts at beg of next 2 rows. Cont straight until sleeve meas 45 cm from beg, ending with RS
Dec 1 st at each end of next and foll 2 alt rows. 68 [76: 84] sts. facing for next row.
Cont straight until armholes meas 19 [20: 21]cm, ending with RS Shape top
facing for next row. Cast off 2 sts at beg of next 2 rows. 44 [54: 64] sts.
shape back neck Dec 1 st at each end of next and on foll 1 [5:12] alt rows, then on
Next row (RS): K20 [22: 24], and turn, leaving rem sts on a 7 [5:2] foll 4th rows. 26 [32:34] sts.
holder. Dec 1 st at each end of every foll alt row to 24 [26: 28] sts, then
Work each side of neck separately. on foll 3 rows, ending with RS facing for next row . 18 [20: 22] sts.
Dec 1 st at beg of row. 19 [21: 23] sts. Cast off 5 sts at beg of next 2 rows. Cast off rem 8 [10:12] sts.
Work 2 rows straight, ending with RS facing for next row.
Cast off rem sts. MAKING UP
With RS facing, rejoin yarn to rem sts and cast off centre 28 [32: 36] Press as described on the information page.
and patt to end. Complete to match first side, reversing shapings. Join shoulder seams using back stitch or mattress stitch if preferred.
Neckband
With RS facing, using 5mm (US 8) circular needle, pick up and K92
[96: 100] sts evenly around neck edge.
Next round: * K2, P2, rep from * to end.
Rep last round 3 times more.
Cast off in rib.
Join side seams starting after the 10cm of rib at back.
See information page for finishing instructions, setting in sleeves
using the set-in method.
28/34/40
15/16/17
2
7/8/9
19/20/21
14
60/61/62
26/25/24
67
57
40
36/35/34
10
5
45,5/50/55
10
21/23,5/23,5
5,25/ 5,25/
45,5/50/55 7/ 7/
8,25 8,25
MEZ Crafts UK Ltd., 17F, Brooke’s Mill, Armitage Bridge, Huddersfield, HD4 7NR, +44 (0) 1484 950630
2 2 2 2 2 2 2 2 2 2 2 2
19
1828 22 2 2 2 2 2 2
2 2 2 2 2 2 22 2 2 2
2 27 2 2 2 2
26
25
17
1624 2 2
2
2
2
2 2 2
2
2
2
2
2
2 2 2 2 22 2 23 15
1422
2 2 2 2 2 2
21
20 2 2 2 2 22 2 2 2
2 2 22 2 2
2 22 2 2
19
2 2 2 2 13
1218 2 2 2 2 2 2
2 2
2
2
2 2 2
2
2
2 2
2 2 2 2
17 2 2 2 11
1016 2
2 15
14
2 2 2 2 2 13 2 2
9
812
2 2 2 2 2
2 2 2 2 2 22 2 2 2 2 2
approximate as they are based on average requirements. Colour reproduction is as close as printing will allow.
2 2 2 2 2 2 2 2 2 2 2 2 11 7
610 2 2
2
2
2 2 2 2
29
2
2 2
8 2 2 2 2 2 2 2 2 2 2 2 2
7
5
46 2 2
2 2 2
2
2 22 2 22 2
2 2 2 2 2 2 2 2 2
3
2 2
5
24 2 2 2 2
2
2 2
2
2
2
2 2 2 2 2
2 3 2 2
1
Ladies Cable Sweater • PBNM000-00014-style11 • v.1
2 2
2 2
22 2 2 2
2 2 2
2
2 2 2 2 2 2 1
When you knit and wear a Patons design Our sizing now conforms to standard This is the SAME as the Mens standard sizing
we want you to look and feel fabulous. clothing sizes. Therefore if you buy a guide with an XXSmall size being added.
This all starts with the size and fit of the standard size 12 in clothing, then our
design you choose. To help you to achieve medium patterns will fit you perfectly. Dimensions in the charts below are body
a great knitting experience we have The menswear designs are now available to measurements, not garment dimensions,
looked at the sizing of our womens and knit in menswear sizes XSmall through to therefore please refer to the measuring
menswear patterns. This has resulted in the 2XL ie. 38” to 50” chest. guide to help you to determine which is the
introduction of our new sizing guide which best size for you to knit.
includes the following exciting features: We have now added a UNISEX sizing guide.
The sizing within this chart is also based on the larger size within the range, ie. M will be based on size 14.
Chest
STANDARD MENS AND UNISEX SIZING GUIDE
Waist
Mens sizes: XS to 2XL. Unisex Sizes: XXS to 2XL
TENSION Fairisle type knitting: When two or three stitch for all main knitting seams and join
Obtaining the correct tension is perhaps colours are worked repeatedly across a row, all ribs and neckband with mattress stitch,
the single factor which can make the strand the yarn not in use loosely behind the unless otherwise stated.
difference between a successful garment stitches being worked. If you are working
and a disastrous one. It controls both the with more than two colours, treat the CONSTRUCTION
shape and size of an article, so any variation, “floating” yarns as if they were one yarn and Having completed the pattern instructions,
however slight, can distort the finished always spread the stitches to their correct join left shoulder and neckband seams as
garment. Different designers feature in our width to keep them elastic. It is advisable detailed above. Sew the top of the sleeve to
books and it is their tension, given at the not to carry the stranded or “floating” yarns the body of the garment using the method
start of each pattern, which you must match. over more than three stitches at a time, but detailed in the pattern, referring to the
We recommend that you knit a square in to weave them under and over the colour appropriate guide:
pattern and/or stocking stitch (depending you are working. The “floating” yarns are
on the pattern instructions) of perhaps 5 - therefore caught at the back of the work. Straight cast-off sleeves: Place centre of
10 more stitches and 5 - 10 more rows than Intarsia: The simplest way to do this is to cast-off edge of sleeve to shoulder seam.
those given in the tension note. Mark out the cut short lengths of yarn for each motif or Sew top of sleeve to body, using markers as
central 10cm square with pins. If you have block of colour used in a row.Then joining in guidelines where applicable.
too many stitches to 10cm try again using the various colours at the appropriate point
thicker needles, if you have too few stitches on the row, link one colour to the next by Square set-in sleeves: Place centre of cast-
to 10cm try again using finer needles. Once twisting them around each other where they off edge of sleeve to shoulder seam. Set
you have achieved the correct tension your meet on the wrong side to avoid gaps. All sleeve head into armhole, the straight sides
garment will be knitted to the measurements ends can then either be darned along the at top of sleeve to form a neat right-angle
indicated in the size diagram shown at the colour join lines, as each motif is completed to cast-off sts at armhole on back and front.
end of the pattern. or then can be “knitted-in” to the fabric of
the knitting as each colour is worked into Shallow set-in sleeves: Place centre of cast
CHART NOTE the pattern. This is done in much the same off edge of sleeve to shoulder seam. Match
Many of the patterns in the book are way as “weaving- in” yarns when working decreases at beg of armhole shaping to
worked from charts. Each square on a chart the Fairisle technique and does save time decreases at top of sleeve. Sew sleeve head
represents a stitch and each line of squares darning-in ends. It is essential that the into armhole, easing in shapings.
a row of knitting. Each colour used is given tension is noted for intarsia as this may vary
a different letter and these are shown in the from the stocking stitch if both are used in Set-in sleeves: Place centre of cast-off edge
materials section, or in the key alongside the the same pattern. of sleeve to shoulder seam. Set in sleeve,
chart of each pattern. When working from easing sleeve head into armhole.
the charts, read odd rows (K) from right After working for hours knitting a garment, Join side and sleeve seams.
to left and even rows (P) from left to right, it seems a great pity that many garments are Slip stitch pocket edgings and linings into
unless otherwise stated. When working lace spoiled because such little care is taken in the place.
from a chart it is important to note that all pressing and finishing process. Follow the Sew on buttons to correspond with
but the largest size may have to alter the first text below for a truly professional-looking buttonholes.
and last few stitches in order not to lose or garment. Ribbed welts and neckbands and any areas
gain stitches over the row. of garter stitch should not be pressed.
Block out each piece of knitting and following
WORKING A LACE PATTERN the instructions on the ball band press the
When working a lace pattern it is important garment pieces, omitting the ribs. Tip: Take
to remember that if you are unable to special care to press the edges, as this will
work both the increase and corresponding make sewing up both easier and neater. If
decrease and vica versa, the stitches should the ball band indicates that the fabric is not
be worked in stocking stitch. to be pressed, then covering the blocked
out fabric with a damp white cotton cloth
KNITTING WITH COLOUR and leaving it to stand will have the desired
There are two main methods of working effect. Darn in all ends neatly along the
colour into a knitted fabric: Intarsia and selvage edge or a colour join, as appropriate.
Fairisle techniques. The first method
produces a single thickness of fabric and is STITCHING
usually used where a colour is only required When stitching the pieces together,
in a particular area of a row and does not remember to match areas of colour and
form a repeating pattern across the row, as texture very carefully where they meet. Use
in the fairisle technique. a seam stitch such as back stitch or mattress