Professional Documents
Culture Documents
Standard Features: The Excalibur AL-500+ features light flash, siren and horn honk output, programmable
auxiliary channels and Immobilizer Mode. This unit includes two stylish 5-button transmitters, a mini electronic 6-
tone siren, a starter interrupt socket and relay, and an AU-84TM dual zone shock sensor.
How to Code the Transmitters: Turn “on” the ignition, then press
the valet switch 5 times and wait for siren to chirp confirmation of
entry into programming mode. Press and release any button on
each remote to be coded (one at a time). The system will respond
to each with an audible confirmation.
Programmable Features
Brown/White :
Dome-
Light This wire can be configured (Programmable feature # 6), to honk the horn
Sensor
Features Programming Mode.
Optional
button to configure the feature.
Este cable se puede programar (función #6), a sonar el claxon en conjunto Sec Sec
08/07
al cable Café operar la Sirena, O TOMAR TODAS LA FUNCIONES DE LA 0.80 4.0
SIRENA PARAQUE NO HAGA FALTA INSTALAR SIRENA.
(-) Relay
Pin-Switch (-)
Brown/White - Café/Blanco = (-Horn Output, Salida claxon -)
Black/White - Negro/Blanco = (-Dome-Light , Salida luz de cabina-)
Pin-Switch (+) Grey - Gris = (-Auxiliary output, Segundo canal auxiliar-)
Pink - Rosado = (-3rd channel output, Tercer canal-)
Pin-Switch (-)
Orange - Naranja = (-Starter Kill, Corte -)
Blue - Azul = (-Trigger Input, Disparo -)
AL-500
Siren
Red - Rojo = (+12 Volts, +12 Voltios)
White - Blanco = (+Flashing Lights, +Luces)
Black - Negro = (-Ground, -Tierra)
15 Amp
+
Parking Lights / Luces
123
123
123
123
123
123
123
123
123
123
123
123
123
123
123
123
123
123
123
123
123
Battery
button a number of times equal to the feature number. The siren will chirp once to indicate entry to
Press the Lock (1 chirp) or Unlock (2 chirps) transmitter button to configure the feature as desired.
Repeat pressing the valet switch to access the next feature, and then again press the Lock or Unlock
Press the valet switch 5 times, wait for audible response, and then select the feature by pressing the valet