Plain tee: - To connect a lateral soil /waste pipe to the main
vertical line at an angle of 87.5 degree.
Door tee:- Function is same as a plain tee with a threaded door for cleaning purpose. Plain bend :- to collecting waste water from internal pipe line and diverting it to the main pipe line at an angle of 87.5 degree. Door bend : function is same as a plain bend with a threaded door for cleaning purpose. Plain y : to connect a branch soil/waste pipe line to the main vertical line at an angle of 45degree. Door y : function is same as a plain y with a threaded door for cleaning purpose. Double y: to connect a 2 branch soil / waste pipe line to the main vertical line at an angle of 45 deg. Door double y : function is same as a double y with a threaded door for cleaning purpose. 45 deg. Bend : mostly used as a shoe for rain water drainage line can also be used for 45 deg. Turn to the pipe line . Saddle strips: to connect wash basin outlet to the main soil line . Cross tee (plain / door) : to connect 2 lateral soil/waste pipe to the main line at an angle of 87.5 deg. Reducing tee (plain / door) : to connect a reducing soil/ waste line to the main line at an angle of 87.5 deg. Coupler : for connecting 2 lengths of pipe . Cleaning pipe: used in between a vertical line to facilitate cleaning . Reducer (eccentric) : used to reduce a main line . Vent cowl : used as a cap on the top of the vertical line also help to release of fowl gases. Pipe clips : to fix /screw the pipe line to the wall or flat surface. Elbow: to give 90 deg. Turn to a pipe line. Elbow 45 deg. : to give 45 deg. Turn to pipe line. Reducing bush : to reduce the internal dia of fitting. Reducing tee : to take a reducing by pass or service line from a main line. FTA : to connect a male threaded fittings to a pipe line. MTA : to connect a female threaded fittings to a pipe line. FTA metal insert : to connect male threaded CP / metal fittings like taps showers etc. to a pipe line. MTA metal insert : to connect female threaded CP / metal fittings like taps showers etc. to a pipe line. Female threaded Tee (metal inserted): to connect male threaded CP / metal fittings like taps showers etc. to a pipe line. Female threaded Elbow (metal inserted): to connect male threaded CP / metal fittings like taps showers etc. to a pipe line. Union SCH -80: to allow quick and convenient disconnection of pipes for maintenance or fixture replacement. Cross Tee: to take a double by pass or service lines from a main line. Repair coupler : to repair damaged portion of a pipe line. Service saddle (top / bottom) : to tap the main line into a small feeder line for domestic purpose. Also used for fixing air valves on the line available in the outlet of ½ “, ¾ “ and 1” in sizes and ¾ “ to 2” outlet in sizes.