This document discusses hiding and unhiding features and entities in Creo Parametric. It describes how to use the hide and visibility options to selectively show or hide features like datum planes, axes, curves, surfaces, components and more. It explains that hidden items remain in the model tree but are dimmed, and can be unhidden to redisplay in the graphics window. The status of hidden and shown items can be saved and reset.
This document discusses hiding and unhiding features and entities in Creo Parametric. It describes how to use the hide and visibility options to selectively show or hide features like datum planes, axes, curves, surfaces, components and more. It explains that hidden items remain in the model tree but are dimmed, and can be unhidden to redisplay in the graphics window. The status of hidden and shown items can be saved and reset.
This document discusses hiding and unhiding features and entities in Creo Parametric. It describes how to use the hide and visibility options to selectively show or hide features like datum planes, axes, curves, surfaces, components and more. It explains that hidden items remain in the model tree but are dimmed, and can be unhidden to redisplay in the graphics window. The status of hidden and shown items can be saved and reset.
> T he View Tab > About Hiding Entities > About Hiding Features and Entities
About Hiding Features and Entities
Creo Parametric allows you to hide and unhide selected model f eatures and entities in the current Creo Parametric session. To save design time, you can use the f ollowing mini toolbar or the View > Visibilit y options to hide or show, f eatures and entities:
• Hide — Hides the selected f eatures, components,
and layers.
• Show:
◦ Show — Shows the selected f eatures,
components, and layers.
◦ Show Only — Shows only the selected f eature
and hides all other f eatures of the same type. You can use this option on planes, coordinate systems, axes, points, curves, quilts, and components.
◦ Show All Except — Hides the selected f eature
and shows all other f eatures of the same type. You can use this option on planes, coordinate systems, axes, points, curves, quilts, and components.
◦ Unhide All — Shows all hidden non- layer model
f eatures.
You can also perf orm the f ollowing tasks
• You do not have to assign the entities to a layer and then blank the entire layer. • You can hide and redisplay individual datum f eatures, such as datum planes and datum axes, without having to hide or redisplay all of the datum f eatures at once. • You can use the Model Tree search capability (Tools > Find) to select all f eatures of a specified type (f or example, all f eatures of the same type in all components within an assembly) and then hide them using View > Hide. The f ollowing types of f eatures and entities can be hidden: • Individual datum planes (as opposed to hiding or showing all datum planes at once) • Datum Axes • Features that contain axes, planes, and coordinate systems • Analysis f eatures (points and coordinate systems) • Datum points (whole arrays) • Coordinate systems • Datum curves (whole curves, not individual curve segments) • Quilts (whole quilts, not individual surf aces) • Assembly components When you hide an item, Creo Parametric removes the item f rom the graphics window. The hidden item remains in the Model Tree list, and its icon dims to reveal its hidden status. When you unhide an item, its icon returns to normal display (undimmed) and the item is redisplayed in the Graphics window. You can save or reset a layer display status as f ollows:
Save St at us—To save the current layer display status, on
the View tab, click the arrow next to St at us and then click Save St at us.
Saving the object does not save the current layer
display status. To save the current layer display status when saving the object, you must use View > Save St at us and then save the object.
Reset St at us—If you change the layer display status
af ter you have saved a status then to revert to the last saved layer display status, on the View tab, click the arrow next to St at us and then click Reset St at us.
Related Topics To Hide an Entity On the Fly To Redisplay Hidden Entities To Display or Hide Items on the Model Tree